How to use an electronic thermometer? How to use the electronic thermometer

How to use the electronic thermometer.

The electronic thermometer can measure the ear temperature and the forehead temperature, and the ear temperature and forehead temperature measurement can be switched automatically by removing or closing the head cover.

1. Ear temperature measurement: remove the head cover, press the scan button to start, put the measurement probe into the ear canal, press and scan once, hear the sound of "whoosh", and the measurement is completed.

2. Forehead temperature measurement: cover the skull, press the scan button to start, attach the measurement probe flat to one end of the temple, press and hold the scan button, and move it along the forehead to the other end of the temple. When you hear a "whoosh", the measurement is complete.

How to use an infrared ear thermometer.

1. In order to avoid affecting the accuracy of the ear thermometer due to the external over-cold or overheated environment, the ear thermometer must be placed in the general environment of room temperature (16 35) for at least 30 minutes before use to avoid incorrect measurement results.

2. The subject should be at room temperature for at least 20 minutes to allow the body temperature to balance.

3. Avoid damp ears before use, and keep the ears clean, and there are no blockages and excessive earwax accumulation in the ears to measure the accurate temperature.

4. After strenuous exercise, you should rest for at least 30 minutes before taking the measurement.

5. Please do not measure the ear temperature when you wake up, because the temperature of the ear on the side that is pressed will be higher than the normal body temperature.

6. Usually, the temperature measured between the left ear and the right ear will be slightly different, so it is recommended to measure the body temperature in the same ear.

7. When the measurement is repeated continuously, please remove the probe head between each measurement, and rest for at least 5 seconds before the next measurement, so as to obtain the most accurate measurement results.

8. The normal measurement reading value is about, the user should usually measure the body temperature more often, so as to understand their own health temperature, if there is any abnormality, you should pay attention to the body changes or ask your doctor.

9. After each measurement, the infrared ear thermometer detector head should be cleaned with alcohol to avoid earwax blockage affecting the measurement results, so as to ensure the accuracy of the next measurement.

How to use the smart electronic thermometer.

2. Open the mobile terminal application software and turn on Bluetooth.

3. Take out a piece of medical double-sided tape, tear off the bottom protective film, and stick it on the bottom surface of the host to ensure that the medical double-sided tape and the temperature sensor are basically concentric. (Medical double-sided tape should not be covered on the temperature sensor).

4. Tear off the top protective film.

5. Stick the host on the armpit** to ensure that the temperature sensor is closely attached to the armpit**.

How to use an electronic thermometer, how to use an electronic thermometer, electronic thermometer.

Turn on the switch, and then do the same as a regular thermometer.

The electronic thermometer is used as follows:

1. Before using the thermometer, the head of the thermometer should be disinfected with alcohol.

2. Press the switch, and the buzzer will chirp immediately for about 2 seconds.

3. Then the display shows the temperature of the last measurement.

4. Measure body temperature with temperature. When the temperature is measured, the displayed temperature value gradually increases, and the " symbol flashes continuously.

5. When the temperature rise rate is less than 0 and 1 within 16 seconds, the " symbol stops flashing, and the thermometer beeps for about 5 seconds. In this case, the thermometer can read the temperature displayed after the measurement.

6. The thermometer has an automatic shutdown function, and it will automatically shut down within 10 minutes after measurement. But in order to prolong the battery life, it is recommended that the user press the power button to turn off the power after measuring.

How to use:

1. Before using the thermometer, the head of the thermometer should be disinfected with alcohol.

3. Then the display shows the temperature of the last measurement.

4. Use a thermometer to measure body temperature. The temperature value displayed during the body temperature measurement gradually increases, while the " " symbol is constantly flashing.

5. When the body temperature rise rate is less than 0,1 within 16 seconds, the " symbol stops flashing, and the thermometer beeps for about 5 seconds, at this time, the thermometer is measured, and the displayed body temperature value can be read.

6. The thermometer has an automatic shutdown function, which will automatically shut down within 10 minutes after the end of the measurement. However, in order to prolong the battery life, it is recommended that the user press the power button to turn off the power after the measurement is over.

There are two types of electronic thermometers, one.

One is contact and the other is contactless. The use method is the same as the large version, and the right I use is that there are more thermometers from Bilkang, and I use Bilkang's as an example to illustrate.

1. The contact electronic thermometer is a switch button, mostly used for armpit measurement, after pressing the switch, you can see a data, which is the data of the last measurement, but our measurement has no effect, the probe is clamped under the armpit, and after hearing the buzzer and tick sound, you can take it out after waiting for 3 minutes.

2. It is more convenient to measure with a non-contact electronic thermometer, and when measuring at 3 5 cm on the forehead, press the measurement button, and you can measure it in 1 second. The non-contact electronic thermometer is recommended to measure about 3 times, and the average value is taken as a reference for body temperature. In addition to body temperature measurement, non-contact electronic thermometers can also measure room temperature, water temperature, surface temperature, etc.

How to use an electronic thermometer, how to use an electronic thermometer, electronic thermometer.

The electronic thermometer is installed electronically and directly press the start button, there will be a number display, and then it can be inserted into the arm when it returns to zero.

How to use an electronic thermometer, how to use an electronic thermometer, electronic thermometer.

How to use an electronic thermometer and the correct measurement method, you will know after reading it.

"Before using the electronic thermometer, the thermometer should be thoroughly wiped dry and disinfected, and the metal probe of the thermometer should be placed on the top of the armpit, or under the tongue of the oral area for measurement. When measuring axillary temperature, clamp the armpit, measure for at least 5 minutes, and then take out the reading. To measure oral temperature, place a metal probe under the tongue and close the mouth for at least 5 minutes before taking out the reading.

Turn on the switch, put it under the tucked and clamp it for 3-5 minutes, and then you can turn off the switch when you run out, and you don't need to shake it off.

To press and hold this button, long press the mode adjustment key (that is, the key marked mode), this key can switch between Celsius and Fahrenheit, and become Celsius to release it.

The electronic thermometer uses the physical parameters of certain substances, such as resistance, voltage, current, etc., to determine the relationship between the physical parameters of certain substances and the ambient temperature, and displays the body temperature in the form of numbers. The disadvantage is that the accuracy of the indication is affected by factors such as electronic components and battery power supply, which is not as good as that of a glass thermometer. The characteristics of semiconductor resistance that change with temperature are utilized.

An electronic thermometer is used to measure the temperature of the armpits, and the thermometer must be clamped tightly.

Sometimes the patient is thin and weak, has no strength, or the child cannot cooperate with the express defense, the family must help the friend to help him clamp the armpit, otherwise the measurement is not accurate enough. Similarly, if you want to measure the temperature of the armpits, be careful not to touch the local armpits with cold things before the measurement. It is possible that if this happens, it will also affect the body temperature, and the measured value is more than the real situation.

After using the electronic thermometer, it should be cleaned and disinfected in a timely manner.