Lenovo Z470 notebook, replace the optical drive with an SSD, 128G size, interface specifications?

You can add a Samsung 840evo series 120G inch SATA-3 580

Add the Samsung SSD to the old hard drive, and the old hard drive has to be removed.

The old hard drive can be installed on the optical drive, and then buy an optical drive bracket and you can install it together.

PS: The optical drive bracket is available on **.

The problem of machine interface specifications can be queried directly according to the machine code, it is not recommended that you disassemble the machine by yourself, you can go to the Lenovo service station to upgrade the hardware.

Dear users, hello!

In order to solve your doubts easily and quickly, the problem needs a professional engineer background to query the relevant internal data, and then solve the problem through the machine information, it is recommended that you directly query the Lenovo official community:

Summary. Dear, hello, I'm glad to answer for you, the answer to your query is: Lenovo Y480 optical drive bit thickness is.

The above is the answer I have compiled for you, if my answer is helpful to you, I hope you can evaluate my service, your praise is the driving force for me to move forward, thank you for your support, if you have other questions, you can continue to ask me, I am happy to answer for you, I wish you a happy life.

Lenovo notebook Y480, want to add an SSD, want to load the optical drive bit, is the optical drive bit 12 or?

Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

Dear, hello, I'm glad to answer for you, Zao Lu for you to find the answer is: Lenovo Y480 optical drive thickness is the above is the answer I sorted out for you, if my answer is helpful to you, I hope you can evaluate my service, your praise is the power of my Qianqin Yan buried, thank you for your support, if you have other questions, you can continue to ask me, I am happy to answer for you, I wish you a happy life.

The installation method of the solid state drive is the same as that of the mechanical hard disk, it is also divided into power supply port and data port, if it is a notebook expansion, it can be placed on the optical drive bit, if it is a mechanical hard disk replacement, it can be replaced directly by the interface.

1. First of all, put the back of the notebook facing up on the table, turn the battery buckle to both sides and take out the battery.

2. Remove the screws of the back cover, hold down the back cover, push it flat to the back, and remove the back cover.

3. Remove the original hard disk and optical drive Remove the bracket on the original hard disk and fix the screws of the hard disk are four There is only one screw to fix the optical drive, and there are also four hard disk brackets, and the hard disk can be removed by pushing it after removing the screws.

4. Install the hard disk bracket to the SSD and then install it on the notebook (put it in first, then push it inside, and screw on four screws).

5. Remove the buckle on the laptop optical drive and the black shell on the back and install it on the hard disk tray Install the notebook's own hard disk on the bracket (the black shell is disassembled, hold the optical drive flat with both hands, and the black shell can be removed by breaking the black shell down on the side of the notebook).

6. Install the hard disk tray containing the hard disk to the notebook, tighten the screws, close the back cover, push it inside, and tighten the screws after installing it in place.

7、Turn on and press the FN+F2 key to set the BIOS,Finally, FN+F10 save You can install the system on the SSD,If the notebook comes with win8 before, it can still be used normally。

Note: When disassembling and disassembling, be careful not to leave screws and other things inside the notebook.

Find out whether the motherboard supports SATA2 or SATA3, if it is SATA2 interface, it will not give full play to the advantages of SSD (SATA3).

Make sure that there is no msata interface, which can be considered as an SSD with an mSATA interface, relatively easy way.

If not, we can only abandon the CD-ROM drive. Buy a regular SATA SSD and a laptop hard drive expansion shelf. Remove the original hard drive from the expansion rack and then remove the optical drive to insert the extended shelf into the optical drive and install the SSD onto the original hard drive.

The above is the recommended practice of SSD as a system disk, SSD as a data disk, in order to extend the shelf.

As for the brand, the normal SATA interface, Intel, Pucot, OCZ, Micron, etc. are also very good.

Lenovo G470 notebook to improve performance, if the memory is too small, just adding an SSD will not have much effect, the memory is too small, and after opening too many programs, it will directly lead to insufficient memory, and the system will start to run slowly. It is recommended to add an SSD after adding a memory module with 2G RAM and below, and the effect will be better. 4G and above memory, you can directly add an SSD, and the system is win7 64.

Compared with HDDs, SSDs have the following advantages:

1.Quick start, no motor to accelerate the process of rotation.

Under the same configuration of the two computers, a laptop with an SSD took only 18 seconds to turn on the desktop and a laptop with a traditional hard drive took a total of 31 seconds, which is almost half the difference.

3.Relatively fixed read time. Because the addressing time is independent of where the data is stored, disk fragmentation does not affect the read time.

4.DRAM-based SSDs have extremely fast write speeds.

5.No noise. Because there is no mechanical motor and fan, the noise level is 0 dB when working. Some high-end or high-capacity products are equipped with fans, so they still generate noise.

6.Low-capacity flash-based SSDs consume less energy and heat in operation, but high-end or high-capacity products consume more energy.

7.There are no mechanical moving parts inside, no mechanical failure will occur, and there is no fear of collision, shock, vibration. This does not affect normal use, even when moving at high speeds or even with flipping and tilting, and minimizes the possibility of data loss in the event of an accidental drop or collision with a hard object.

SSDs that can be equipped with SATA interface.

You don't see the hard drive on your computer, check if it's connected?

Yes, the Lenovo laptop G470 can be retrofitted with an SSD, which comes with an inch SATA connector that can be fitted with either a traditional hard drive or an SSD.

Replacing your old laptop with an SSD can make your computer run faster.

This computer hard disk and optical drive are connected to SATA interface.

If you want to change to an SSD, you can buy an SSD with a capacity of 256G or 512G or larger SATA interface, remove the mechanical disk in the original machine, replace it with a newly bought SSD, and install the operating system.

It can also occupy the optical drive and replace it with an SSD. Due to the large space of the optical drive, it is necessary to buy a hard disk bracket of appropriate size, put the SSD into the bracket, and then put the bracket into the optical drive, which can be used as a slave disk, and the operating system must be installed as the main disk.

Lenovo G470 Notebook Regret Roll Plex to install SSD by following these steps:

1.The installation method of the solid state drive is the same as the mechanical hard disk, it is also divided into power supply port and data port, if it is a notebook expansion, it can be placed on the optical drive bit to spare the code, if it is a mechanical hard disk replacement, you can directly replace the interface.

2.Enable the AHCI mode on the hard disk. After installing the SSD, remember to turn on AHCI in BIOS, the specific operation method is to click the DEL key when entering the system, enter the BIOS to find the advanced mode, find the AHCI mode in the hard disk mode to select, and press F10 to save and restart.

3.Alignment 4K is one more step with the traditional mechanical hard disk, if aligned, the speed of use will be significantly improved, so how to do it, if you reinstall the system, you can directly use the system disk Biying to reformat the SSD, if you use PE and other tools to install, you can use the hard disk tool in 4

096 node, and then use 4k software to see if it is aligned.

First confirm whether there is a msata interface, if so, you can consider the SSD of the previous mSATA interface, which is more convenient.

If not, you have to give up the optical drive. First, buy an SSD with a normal SATA interface and a laptop optical drive hard disk expansion shelf. Remove the original hard disk and put it in the expansion rack, then remove the optical drive, and insert the expansion rack into the optical drive bit, and finally install the SSD in the original hard disk.

If the SSD is used as a data disk, you can put the SSD on the expansion shelf.

As for the brand, Intel, Puket, OCZ, Micron, etc., which have ordinary SATA interfaces, are still very ......