How to set two Tengda A5S to one home mode and one to signal amplification mode?

1. Make sure that the first wireless router is set up to surf the Internet normally.

2. As long as the second wireless router is powered on normally, log in to the interface of router 2, click "Basic Settings" - "LAN Port Settings", change the IP address to "OK", click "OK" The router will automatically restart, after restarting, in the interface of re-login, and then set the "wireless signal amplification" mode step by step!

Line connection: Power on the wireless router first, and then use a laptop to connect the wireless signal of the wireless router.

1) Enter the management address of the router in the address bar of the browser (the default is, then enter the login password (the default is lowercase admin), click to log in, then click to jump to the home page, enter the router management interface, and click "Setup Wizard" in the upper menu bar.

2) Select the "Wireless Signal Amplification" mode, click the "Next" button, "Scan the AP site information" to select the SSID, "Security Mode", "Encryption Algorithm" and "Key" of the router you want to connect to (these are all filled in to the router you want to connect), click "Next", set the wireless signal name and wireless password of the A5S, click "Next", click "Finish".

The wireless coverage isn't as good as the product description, which is disappointing. Because in actual use, the signal will be affected by some objective factors such as the environment and attenuation, which is unavoidable. Of course, for the attenuation of the signal, it is not helpless, when using, you can use some skills to minimize the signal attenuation.

Position your wireless router properly.

Since the wireless signal is greatly attenuated after crossing obstacles, especially through metal. In a family house, there are a lot of reinforced concrete walls, so when placing a wireless router, you should make sure that the signal passes through the wall as little as possible. Modify the signal channel to reduce interference.

In the configuration interface of the wireless router, you will see the option of wireless channel. Generally speaking, there are 11 wireless channels at 54M, which are channel 1 to channel 11. Signal interference occurs when multiple wireless signals are using the same wireless signal channel.

Many users do not modify the wireless signal channel after purchasing a wireless router to use, so they use the channel when the router is configured by default, so that channel interference is easy to occur. If there are neighbors in the vicinity who are using the same channel, the wireless signals of both parties will be affected.

1.Enter the upper router setting interface, the wireless signal is fixed, use 1 6 11 to click OK, and restart the router.

2.Connect your mobile phone or computer to the A5S wireless signal, open the browser and enter it in the ** bar to enter the router settings interface.

3.Click Wireless Settings--- Basic Wireless Settings, the channel is fixed to the same as the superior, and click OK.

4.In the Setup Wizard, select the wireless signal amplification mode. Note: The upper signal strength needs to be below 70 for the scan to be successful.

For the setting method, please refer to: Tengda A5S wireless signal amplification mode setting.