The mobile phone is connected to the router and cannot access the Internet, what does 1302 mean

1. If you can't access the Internet, please try to turn off and restart; Please check whether the maximum flow rate threshold for this month has been reached; Please check whether your phone settings mobile data is turned on; Set the mobile data option APN and whether the name is set to 3GNET.

2. If you still can't access the Internet, it is recommended that you troubleshoot in the following ways:

Check whether there is a network, it is recommended that you can use it in a place with a strong signal;

Check whether there is still a credit in the account, if the balance is insufficient, you need to recharge before you can use it;

Confirm whether the parameters of the mobile phone have been set;

Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

Check whether there is a problem with the mobile phone, it is recommended that you change the phone for testing;

In case of traffic capping, it will also lead to the inability to access the Internet;

The number has not been registered with the real name, and the real-name registration has not been completed within the time limit, and the service will be suspended;

3. If the above situation is not the case, it is recommended that you contact the manual customer service of Unicom in the place where you belong for consultation, and the actual situation is subject to the local policy.

If your phone says it's connected to a wireless network.

But if you still can't access the Internet, Samsung phones are generally recommended to do the following:

1.Turn off your phone, restart your router, and reconnect to your wireless network.

2.Confirm the transmission bandwidth of the router (the supported router supports 40 MHz, we recommend setting it to 20 MHz) and check whether the router network is normal.

3.Confirm whether an IP address is set in the router.

Filtering: MAC address filtering.

4.If you still can't Wi-Fi the Internet, it is recommended to try the static IP mode: Settings --WLAN - Select a wireless hotspot - Show advanced options - Tick - Swipe down the screen - IP Settings - Static - IP address Gateway.

5.Connect to another router and try to taste.

6.Factory reset after backing up your phone's important data.

Try. If the problem still exists, it is recommended to bring the purchase invoice, three-guarantee voucher and mobile phone to the service center for testing by the engineer.

Summary. 2. Browser problem: use Internet Explorer, do not use third-party browser.

3. Cache problem: Clear browser cache and cookies.

5. Last abnormal offline: Turn off the wifi switch for more than 15 minutes and try again.

Frequently asked questions about Huawei phones.

How to solve the problem that the phone cannot connect to 1302.

Dear, hello, please wait a moment, we have seen your question in Bishan, and we are sorting out the information for you quickly, and we will send your answer to the little master immediately. Thank you for your support, recognize my service, and remember to give a thumbs up<>

<> causes and solutions: 1. If there is a problem with the network of the mobile phone, it is impossible to connect to the server, check the network connection status of the mobile phone to ensure that the mobile phone is leaking and the network connection is unblocked; 2. The server is busy or the server is faulty, resulting in users being unable to access.

I can connect wirelessly.

Mobile networks can't connect.

117.*.2. Browser problems:

Don't use the authentication page saved in your favorites, you need to enter it in the address bar and automatically jump to the authentication page. 5. Last abnormal offline: Turn off the wifi switch for more than 15 minutes and try again.

The WLAN connection is not available, and the error code is 1302, which means that the server connection is wrong.

Other errors are as follows:

Error** 1001: No wireless card found causing free wifi to fail.

Error** 1002: The wireless network card does not support the WiFi hotspot function and the free WiFi is turned on and fails.

Error** 1003: Please turn on your computer's wifi hardware switch causes free wifi to fail.

Error** 1005: Invalid hotspot name causes free wifi to fail.

Error** 1006: Invalid password causes free wifi to fail.

Error** 1203: Failed to share and failed to turn on free wifi.

Error** 1401: Failed to turn on DHCP Failed to turn on free wifi.

Error** 5023: An unknown error caused the free wifi to fail to turn on.

Error** 1502: Failed to set NIC IP.

Error 102 is displayed on the wireless route: The network connection is incorrect.

First, the cause of the failure:

1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet.

2. Router problems, the router may be overheated or damaged.

3. Broadband arrears may lead to inability to access the Internet.

4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet.

5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

Second, the solution:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and rule out the problem of wifi itself;

2. Restart the router to try or restore the router to factory settings, and then dial-up to connect to the Internet.

3. Contact the broadband customer service to confirm whether the broadband account is abnormal, such as arrears, it is recommended to recharge and then dial up to connect.

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.

5. If the above reasons are ruled out, then it may be a problem with the mobile phone system, it is recommended to restore the factory settings or flash the phone to see if it can solve the problem.

If your Samsung phone can't connect to a wireless network, it is recommended to do the following:

1.Turn your phone and wireless devices on and off again.

2.It is recommended to forget the network to reconnect, operation: Settings - WLAN settings - click and hold the name of the network to be deleted - do not let go - forget to delete the network.

3.An attempt was made to replace the static IP address.

4.Whether it is too far away from the wireless router and affects the received signal.

5.If possible, change to another router or try to connect wirelessly6After updating the system version, test whether there is any improvement.

7.Back up your phone data (**book, SMS, multi** files, etc.), and restore factory settings8If the problem persists, it is recommended to take your phone to the nearest Samsung service center for testing.

If your mobile phone cannot access the Internet, we recommend that you troubleshoot the problem in the following ways:

Check whether there is a network, it is recommended that you can use it in a place with a strong signal;

Check whether there is still a credit in the account, if the balance is insufficient, you need to recharge before you can use it;

Confirm whether the parameters of the mobile phone have been set;

Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

Check whether there is a problem with the mobile phone, it is recommended that you change the phone for testing;

When the total traffic generated by the Internet reaches the maximum traffic cap value in the current month, the system will automatically turn off the Internet access function, and the Internet access will be automatically resumed in the next month.

The number has not been registered with the real name, and the real-name registration has not been completed within the time limit, and the service will be suspended;

If it still cannot be used normally after self-service troubleshooting, it is recommended that you contact the local customer service for verification and processing.

If your phone can't access the internet, it is recommended to try it by following these steps:

1. Check whether this situation occurs in other mobile users around, if there is a similar situation, it may be a local network signal problem.

2. Check the Internet settings of the mobile phone, and you can reset the network parameters and restart the operation of the mobile phone.

3. Check whether there is still a phone bill in the account and whether the status of the mobile phone is normal.

4. Change the mobile phone to test whether the SIM is normal.

If you still have problems, you can call the local 10086 to report the situation, and we will be happy to help you.

Send a** Can't connect to wifi or mobile network.

A hint of 1302 appeared, and the possible reasons for this are as follows:

1. The homepage address has not passed the validity test;

2. The domain name resolution for the homepage address failed;

3. Failed to retry the home address multiple times, and the connection to it could not be established4. The network was abnormal.

In this case, it is recommended to check whether the link is normal, and then try again later, if it still can't be solved, it is recommended to contact 10086 for consultation and resolution.

It's in arrears. My personal experience.

It's in arrears. It's a good idea to check the balance of your phone bill first.

Network TV prompts server connection failure (**1302) is generally caused by the wrong method of connection and setting, it is recommended to restart the router, follow the following methods to connect, set:

1. Required conditions: TV, networked router, network cable;

2. Connect one end of the network cable to the LAN port of the router and the other end to the network interface of the TV.

The TV network interface is on the back).

3. Turn on the TV, operate the TV with the remote control, and enter "System Settings";

4. Under the interface of system settings, select "Network Settings" on the left, click on the right to appear the detailed interface of network settings, select "Wired Settings" and click to enter.

5. After entering the wired settings, click "Wired automatically obtain IP", the TV can detect the network signal and obtain the IP address, indicating that the TV has been successfully connected to the network.

1. The network server connection failure (**1302) is generally caused by the wrong connection and setting method, and it is recommended to restart the router.

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband account, such as arrears, recharge the broadband, and then dial up to connect. Or contact the maintenance personnel for door-to-door service!

Network connection error **1302 refers to the failure of the set-top box to connect to the server, which is generally caused by abnormal network connection

Step 1] Check whether the network cable is securely connected.

Step 2] Restart the modem.

Step 3] After the modem is stabilized, restart the set-top box.

Step 4] If this error is still reported after restarting, you need to report a fault.

Error **1302 generally has 2 cases:

First, you need to check whether the network can be pinged, if the ping is not working, you must deal with the network problem first. Generally, find a regional network manager.

Second, if the network can be pinged, it means that the server address has been restored to factory settings for some reason, and you need to call ** to go to the IPTV fault center to let them refresh your server address. It's solved.

But whether it is the first or the second type, maintenance personnel are needed to deal with it, in fact, the maintenance personnel are powerless, they just want to come over to fight, these 2 can only be played by maintenance personnel.

What you're talking about**is not a broadband bug**, your question is very general and details your problem , what equipment.

If the computer can't be connected, directly use the cat to connect to the broadband to check the error**, and then use the router to set your account and password.

If your phone can't be connected, use your computer to confirm that your router can access the Internet normally, and then check whether the wifi password entered by your phone is correct.

Or the wifi encryption form is not supported by the phone. Enter the router to change the encryption form!

There are several scenarios in which the phone cannot connect to Wi-Fi properly:

1. Confirm that the password has been entered incorrectly.

Symptom: The password is incorrect, the message is rejected, and the network cannot be connected.

Here's how to fix it:

1) Check whether the password is entered incorrectly or the characters filled in are case-sensitive, and the number of digits entered in the password is too long or too short.

2) There are too many wireless network users connected, try to connect later.

2. Prompt: Connecting to wifi is rejected.

Fault phenomenon: others can connect, but you can't connect to wifi, and the connection is refused.

Here's how to fix it:

1) The router device may have enabled wireless MAC address filtering, it is recommended to contact the NMS to add the MAC address of the mobile phone. The MAC address is viewed in [Settings] - [About This Mac];

2) If the router is faulty, try to restart the router.

3. The mobile phone is connected to wifi and prompts that it has been saved but cannot be connected.

Symptom: The Wi-Fi connection prompt on the mobile phone has been saved, but the connection fails.

Here's how to fix it:

1) This prompt indicates that the encryption method, password or signal channel of the router of the wifi signal has been modified. It is recommended to reset the password and encryption type of the router, and the terminal connected to this network needs to [Ignore this network], and re-enter the password to connect.

2) If the router is faulty, try to restart the router.