How do I open the Tissot watch chain steel chain ?

Spare material: steel strap watch.

2. The strip particles with arrows can be removed, and at the same time, it is clear that several sections need to be removed, preferably even numbered, and the same number of sections should be removed on both sides, otherwise it will affect the appearance.

3. Unscrew the handle of the meter dismantler, put the watch chain into the watch slot, and pay attention to the direction of the arrow.

4. Align the small hole in the bracelet, slowly turn the handle, and push the steel needle to directly take out the bracelet.

5. By hand or pliers.

Just take out the needle.

There are two small steel sticks to thread the small steel pieces together, and the other one should go to the store and let the professional help you get it, and you have to knock the small stick out.

Find a toothpick and you can just it.

How to disassemble the steel bracelet:

1.The section of the steel belt buckle (the short one) should always be on the top of the watch (when the watch is looking straight and the handle is on the right). The steel belt is not like a human belt, and the installation orientation is specified.

2.When the watch is spread out, the letters or logos on the steel band discount should be the same on the dial, if it is upside down, it means that the steel band is reversed. You can use your thumb to open the buckle, and the butterfly buckle can only see whether the logo is the same as the dial.

The steel belt is reversed, and it must be difficult to open and close.

3.Discounted steel bands will have many holes on the sides to adjust the length of the strap. When indenting the steel belt, it is also necessary to pay attention to the side of the buckle adjustment joint (indented and discharged) that should not be indented in the direction of the closed shaft of the steel belt.

In this way, the clasp creates a lever force, which makes it very easy for the steel strap to be opened, and it is easy to lose the watch.

4.When removing the steel belt section, it is best to go even number, and the left and right sides of the buckle must be removed evenly. In this way, we can ensure that the buckle is centered, and it is comfortable to wear, especially for ladies with thin wrists, who should pay more attention to this problem when taking the steel belt joint.

5.The bolting of knots and knots is generally done with the so-called "hairpin bolt". It is relatively easy to loosen and escape, and the solid steel belt is generally connected with nails or screws to connect the steel belt sections, and it may be loose and channeled out after a long time, so it must be checked regularly.

You can push it outward with a needle-like object, and if it comes out with a push of the peg, it is already loose. If you notice any signs of exposure, go for repairs immediately. Some watches are particularly fond of this problem, and it is recommended that you replace the strap on the case every 7-8 years, which is very cheap.

It is best to touch the oxide glue when installing the screws to ensure that it is reliable.

6.There is a direction to disassemble the steel belt section, generally there is an arrow on the strap to indicate the direction of the bolt between the strap sections, not the other way around, the direction of installation and the direction of removal should be consistent.

Take it to the watch repair shop and ask the master to help.

1. First of all, separate the buckle to both sides, so that you can open the butterfly buckle, and sometimes you need a little force to open.

2. To wear a butterfly buckle, you must first open the buckle at the top of the buckle.

3. After opening the buckle, you can see the small needle, and put the long end strap through the buckle buckle.

4. Adjust the length of the strap according to the size of your wrist and align it with the hole to be locked.

5. Finally, press the short-side strap first, and when you hear the sound, the butterfly buckle of the watch belt will be buckled.

Tissot watch buckles are butterfly buckles, there are many kinds of butterfly buckles, the butterfly buckles on the general watch are pulled hard, and some are released by pressing the buttons on both sides. Don't be afraid to damage it when you pull the butterfly buckle, because the butterfly buckle is made of steel and is fully able to withstand the pull force of normal pulling.

The strap of the butterfly buckle is very simple to wear, put on the watch, buckle both sides separately in the middle, and it is put on. The butterfly clasp is comfortable to wear, and because it can be connected to the watch together to form a ring, it is easy to strap and take off.

As long as the butterfly buckle is pressed and held on both sides, it is very simple, just look at it yourself!

I can't see the table, it's hard to say. The buckle is different, there are picking, there are two pinching, some are pinched and one side is opened, and some are pinched and opened on both sides.

1. Break the fixing clip of the pin buckle upwards, gently press the button buckle in the middle of the buckle holder, the two ends of the buckle will automatically pop open, pass the strap through the end with the needle, and press and fix it at the pinhole selected before;

2. Put the strap on the wrist, first buckle the end without the needle, and then buckle the other end;

3. Fix the extra belt on the leather ring, and only need to press the buckle when unfastening, and buckle it directly when wearing.

The strap of the Tissot watch can be removed by placing it in the slot of the strap removal tool and pushing out and unplugging the tube along the side holes.

Tool Material: Strap removal tool.

1. First of all, find the small hole on the side of the strap of the Tissot watch.

2. After that, put the strap into the card slot of the strap removal tool.

3. Then rotate the handle to push out the strap tube.

4. Then pull out the strap tube.

5. Finally, the strap of the Tissot watch is removed.

Notes:Before placing the Tissot watch in the card slot, make sure that the hole on the side of the strap is not misaligned.