Huawei Maimang 4 installation card Huawei Maimang 5 how to install the card

The Maimang 5 mobile phone is a dual card slot design in one, and the card slot is on the left side of the phone. You can insert 2 Nano SIM cards, or 1 Nano SIM card and 1 Micro SD card at the same time.

First, turn off your phone and find the card tray at the top left of your phone (the area where the small round hole on the left side is located). Insert the needle provided with your phone into the small hole on the side of the tray vertically and press hard to make the tray pop out.

There is a text prompt on the card tray for the type of card: the inner card (also called card slot 1) only supports nano-SIM cards, and the external card (also called card slot 2) can be loaded with nano-SIM cards or SD cards.

Then place the nano-SIM card and SD card in the card tray in the indicated direction, noting the direction of the notch. The card tray with the card is flat, and you can see from the side that the card tray and the card are on the same plane. The screen of the phone is up, and the card tray is pushed back into the card holder.

Insert the card pin vertically into the small hole on the side of the card slot, press firmly to make the card tray pop out, and take it out.

Attach two Nano SIM cards, or one Nano SIM card and one Micro SD card, to the card tray. (For the direction of the notch, please pay attention to the notch direction of the card circled in red, forcing or brute-forcing the card may damage your card or tray.) ）

HUAWEI Maimang 6's SIM card 1 supports Nano card, and SIM card 2 supports Nano card or MicroSD card. Here's how to insert the card:

1. After taking out the SIM card tray through the card needle, the side with characters on the upper and lower sides of the card tray is the front, and the SIM card or SD card can be put into the corresponding card slot on this side.

<>2. Put the SIM card or SD card into the corresponding card slot on the front of the tray.

3. Face the front of the card tray and the front of the mobile phone to yourself, keep the card tray and the card on the same plane, and insert the card tray.

1. Flip the phone to the left side, and you can see the card slot.

2. In the shutdown state, insert the card pin vertically into the small hole on the edge of the card slot, press hard to make the card tray pop out, and take it out.

<>3. Take out the mobile phone card and press the card tray into it.

Is it very simple for Maimang 4 to take out the mobile phone card? The most important thing is to have the right posture, and you must remember not to use brute force when pulling out the card slot. You need to press it with a pick-up pin before you can take it out.

SIM card installation can be easily achieved in just two steps, and the tools required for installation are the card needles in the box.

The Huawei Maimang 5 SIM card installation tutorial is as follows:

2.After removing the SIM card slot, install the prepared Nano SIM card to the corresponding position of the card slot, and then insert the SIM card slot into the SIM card slot of the mobile phone.

In terms of card slots, Huawei Maimang 5 adopts the design of single card tray and dual card slots, and the two card slots are nano card slot and "and or card slot". In terms of network standard, both card slots support the full Netcom network standard, and when dual SIM dual standby, you can switch to use the 4G network at will.

Precautions]: We must be careful when taking out the card slot with the card needle, and do not use too much force to break the card needle.

Maimang 5 is a dual card tray in one design, the card tray is on the left side of the upper part of the phone. You can insert 2 Nano SIM cards, or 1 Nano SIM card and 1 MicroSD card at the same time.

In the power-off state, find the card tray at the top left of the phone, and use the card pick-up needle that came with the phone to remove the card tray.