How do I connect to someone else s wifi signal over a long distance?

It can be used with the router's wireless relay.

Step 2: Configure the router's Internet access mode to DHCP

Step 3: Scan for wifi signals that need to be relayed.

Step 4: Check whether the relay is successful Before setting up wireless bridging, you must know the security mode, encryption rules, and key of the superior wifi signal, find a network cable, one end to the computer, and one end to the router 1 2 3 4 any interface.

If you want to connect to someone else's wifi signal from a distance, you shouldn't be able to, because if you want to connect to someone else's wifi signal from a distance, the passing signal will be refused, and he will be weakened.

If you connect to someone else's wireless network signal from a long distance, this requires our mobile phone signal to be very strong, and then click on the network name you want, enter the password to connect.

In general, such a complex long-distance situation does not exist.

The wifi signal is related to the router that the shopkeeper bought himself, and the router has a range, stipulating how far away it can receive the signal, and there is no way to connect it at a long distance if it is far away.

If you connect to someone else's wifi at a long distance, you can't connect, because his wifi signal doesn't have such a high ability to penetrate walls, so it can't penetrate that far.

If you want to connect to someone else's wifi, you need to have this distance, if the distance is to be sent continuously, he is basically useless, even sent.

It is not easy to connect to other people's WiFi signals over long distances, and you must both agree to connect to each other.

Turn on the wifi directly.

Enter your password. Use the link.

One. Place your router in a room where you often surf the Internet.

It's best to place the router on a desk or bookshelf, and preferably in an open area, the router will emit a signal around, and the closer it is, the stronger the signal.

Two. Keep the router away from other electronic devices.

Other electronic devices such as microwave ovens and wireless** can interfere with the router's signal.

Three. Keep the router antenna vertical.

The router's signal travels from a direction perpendicular to the antenna. In other words, your router signal will travel horizontally, so that it can travel farther, receive stronger signals, and have a lower bit error rate.

Four. Add a bridge router.

If your home is large and has many barriers, you can consider equipping the router with a relay router, which is a router and a bridge to the router. It may not be able to increase your internet speed, but it can travel farther and get a wifi signal in every corner of your home.

The premise of connecting to other people's wifi is to know the name and password of other people's wifi, and then connect through wireless connection.

Note that the main and secondary routers should use the same signal channel, and once the signal is connected, you need to enter the password to save it.

How to connect to wifi:

1. Click Settings.

2. After opening the settings, we can see that there is an option of WLAN, and then we need to turn on the option of WLAN.

3. After turning on WLAN, we can see that there are a lot of WiFi, and then we need to find the WiFi we want to connect, and then click on the WiFi to make it.

4. After turning on that wifi, we need to enter the password, wait for us to enter the password, we click on the connection.

Benefits of wifi:

1. The coverage of radio waves is wide, and the coverage of radio waves based on Bluetooth technology is very small, with a radius of only about 50 feet or about 15 meters, while the radius of wifi can reach about 300 feet or about 100 meters.

2. Although the quality of wireless communication transmitted by wifi technology is not very good, the data security performance is worse than Bluetooth, and the transmission quality needs to be improved, but the transmission speed is very fast, which can reach 11Mbps, which meets the needs of personal and social informatization.

3. Manufacturers only need to set up hotspots in densely populated places such as airports, stations, coffee shops, libraries, etc., and access the Internet to the above places through high-speed lines. In this way, since the radio waves emitted by the hotspot can reach a radius of tens of meters to 100 meters from the access point, users can access the Internet at high speed as long as they bring a laptop or PDA that supports wireless LAN to the area.

In other words, manufacturers do not need to spend money on network cabling access, which saves a lot of costs. <>

Place the wireless router by the window.

Add a router with wireless expansion where the wireless signal can be covered.

The router with wireless expansion function is actually a wifi signal amplifier, which does not turn a bad signal into a good signal, but transmits a good signal to a longer distance. For example, there is a good signal wifi in the window, but in the room, it cannot be received, and it is effective after using the amplifier.

And the signal received by the window itself is poor, so it is useless to use an amplifier.

Therefore, if you want to receive wireless signals over a long distance, a wifi amplifier is a good choice.

1 mile to 2 is still far away, if there is a wall or block, it is not easy to change to a high-power one. Your little antenna simply won't work. It is estimated that it is very expensive to buy a high-power one. You can study it first, and then check whether its parameters are enough for your actual use.

If the network in your dormitory is your own route, then add a high-gain antenna to the route, 500m, it is best to use a directional antenna, and aim the antenna at the location of your company, and you will be able to receive the signal, if the network of your dormitory is not your own, then only connect a high-gain antenna to the computer in your company, and it will also have a good effect, and the best thing is to add high-gain antennas on both sides. In that case, I guarantee you that your signal is leveraged!!

Method 1) Place the wireless router by the window.

Method 2) Add a route with wireless extension function in the place where the wireless signal can be covered.

It's not an advertisement...

If it is convenient to find a direct position between two points, then it is enough to use two APs to make a point-to-point connection. If you want to be detailed, it's best to draw a picture.

In the WLAN protocol, the speed is significantly higher than and. However, it must be noted that if you want to increase the speed, you must equip a network card and a wireless router together.

2. Place the router in the best position. Routers are ugly, but don't always hide behind a TV stand. If you want the strongest signal, it's best to place it in an empty space that is not blocked by walls or obstacles.

The antenna should be straight, and the higher it is placed, the better (one reader found that the signal was best when the router was placed in his attic). Ultimately, it must be acknowledged that placing it in the center of the whole house will allow you to have a high-quality Wi-Fi signal in every part of your home.

Q: What kind of receiving equipment to buy?

You can buy a rub network card from the Internet, receive wifi from a distance, but you need to connect to the computer, it is generally difficult to crack the password, but there is no password, or you know the password to enter directly, receive a long signal, and you can also convert it to wireless.

Your router can receive wireless signals while outputting signals over a network cable, but not wirelessly transmitting wireless signals.

Another problem is that the router at a distance of 300 meters is definitely impossible to search for the signal of the other party, and it is impossible to receive the signal when receiving a straight line connection, and the bridge router needs to log in to the other party's router settings, and the router network connection can be set up through the login password of the router administrator.

You can go to** search for wifi relay king without a computer. It can create a hotspot while connecting to the wifi, which is equivalent to creating your own wifi with someone else's network

Factors that affect the distance covered by the wireless AP.

1.The environment in which the wireless AP and the wireless client are located.

This factor is easier to understand, because WiFi uses the wireless microwave frequency band, the biggest feature of microwave is that it propagates in a nearly straight line, and the diffraction ability is very weak, so the walls, decorations, furniture, ceilings, etc. in the WiFi coverage environment will cause additional attenuation to the signal. In addition, a series of complex changes such as reflection, diffraction, and refraction will occur.

2.Environmental changes.

The universe is constantly changing, and our environment is always changing, with objects and people moving, humidity in the air rising, and even electromagnetic radiation from space affecting the transmission of wireless signals.

3.The capabilities of the client's wireless network card.

Generally speaking, under the same location and the same wifi signal, the signal strength of a notebook is often stronger than that of a mobile phone, which is mainly caused by the different wireless network cards and antennas of the terminal equipment. That's why in the same location, this phone is fast and that phone is slow. It is also important to note that the farther the distance, the worse the signal and the lower the transmission rate.

Find a router that can be used as a bridge and put it on the balcony.

This is unlikely, this wifi signal is limited. It's only that far away unless you move the router.