Flatbed truck consignment excavator contract template

You're asking about the delivery fee, right? See if you're picking up or dropping off?

It also depends on the size of the engine horsepower and the size of the flat model, which is definitely different for different models.

If the customer picks up the car and only hires a driver, the fuel and bridge fees are paid by themselves, which is very simple.

It depends on where you are, Beijing starts at 400 yuan, 50 kilometers. More than 4-5 yuan per kilometer, it also depends on how big your car is? I'm telling you about small ones, 5-6 meters long.

It only depends on your local market price!

There are two baffles at the back of the flatbed truck, which are lowered to form a ramp that the excavator can drive up directly. There is no slope can also be used by the excavator to support the flatbed truck with a shovel, one side can be warped, take the flatbed, and then the shovel turns back, support the ground, the other side is also warped, and drive the flatbed.

You can also use the bucket to press the car plate to prop up the excavator and go to the car a little bit, and then turn the bucket to the back Keep 30cm-50cm with the ground, and then climb to the car When you can't go, press down with the bucket to flatten the car and then reverse the stick at the same time.

A few things to note:

The crawler and the ladder are aligned, it is best to be flat when getting on the car, there should be no gravel on the excavator board, and no people standing nearby when getting on the car.

2.The angle of the slope when getting on the car cannot be greater than the climbing angle of the excavator. Generally, it is reversed to go up, because the driving surface is no longer up and down, and the bucket of the excavator can be used to resist on the ground, do outward movement, and help the excavator climb.

So reverse, the big arm moves forward (for the excavator).

3.Before getting on the car, align the excavator with the flatbed, follow the command of the ground personnel, and try to make the excavator go in a straight line.

4.Pay attention to the height of the selected flatbed and excavator, the "planing low" of the flatbed is the height of the flatbed to the ground, plus the excavator.

The height cannot exceed the height limit of bridges, tunnels, power lines, etc. along the way. If it is not too much, you can consider putting an excavator.

The bucket is removed to reduce the height of the boom; Of course, especially large excavators should also pay attention to whether they are extra-wide. This should be flat.

The board truck driver considers.

The excavator is on a flatbed truck, and you can drive it yourself.

You can go and buy one, now that the car market is sluggish, the discount is very large.

Look for an excavator near you! Needless to ask???

There are double-reed ladders, as well as hind legs, which are produced by authentic flatbed car manufacturers. All are produced according to technical parameters.

Excavator on and off the flatbed tutorial, the most detailed teaching on the whole network, the old driver teaches you to do this.

I'm dizzy, and if I know how to drive an excavator, I'll definitely get on the trailer.

What is the prospect of today's excavator flatbed trucks:

Now, real estate investment in engineering vehicles occupation is growing at a high rate.

In the national macro policy, pay close attention to ensure the construction of housing, the 13th Five-Year Plan period, to ensure the continuous power of infrastructure construction.

Long-term investigation, whether it is infrastructure construction or water conservancy, railway, aviation, energy construction, will create a continuous driving force for the development of the engineering vehicle profession.

Therefore, excavator flatbed trailers have great prospects.

Blue plate flatbed truck can pull 75 excavators, judging whether a flatbed can pull the excavator mainly depends on the length and width of the excavator and the weight of the excavator, the blue plate flatbed is generally about 2 meters in length, width is about 2 meters, the carrying capacity can reach about 8 tons, 75 excavators are in this range in terms of length, width and weight.

It is necessary to pay attention to stretching out the telescopic plate of the flatbed, and also put down the outriggers of the flatbed after the double reed of the flatbed is put down.

It depends on how big it is.

Dongfeng Jinka small excavator transport truck.

Equipped with 110 horsepower engine, double-layer girders, tires, issued three certificates, the actual pull of 8 tons, dimensions (mm): 6920,6810 2370 2480. The car is designed for small excavators and is a transporter for excavators below 80 models.

Dongfeng Duolika small excavator transport truck.

Equipped with 140 horsepower engine, double-layer girders, tires, issued three certificates, the actual pull of 14 tons, dimensions (mm): 8400 2500 2800. The car is designed for small and medium-sized excavators and is a transporter for excavators below 150 models.

Liberation of small excavator transporters.

Equipped with 140 horsepower engine, double-layer girders, tires, issued three certificates, the actual pull of 16 tons, appearance (m): 9000, 8750 2500 2800. The car is designed for small and medium-sized excavators, and is a transporter for excavators below 200 models.

Excavator flat car depends on how big the excavator you pull, according to the size: there are blue cards, single bridge, rear double go, front four and eight, semi-trailer trailers, etc., and the brand points: Dongfeng, JAC, Jiefang, Chu Feng, etc., configuration of engine, gearbox, rear axle is different, these are the chassis, the bodywork materials are ordinary steel, fierce steel, lightweight and so on.

It depends on how big you need to be.

Overload overload?

If the load of the freight motor vehicle exceeds the approved load weight by less than 30%, a fine of 200 yuan shall be imposed and 2 points shall be deducted; if 30% does not reach 50%, a fine of 500 yuan will be imposed, and 3 points will be deducted; If 50% does not reach 100%, a fine of 1,000 yuan will be imposed and 3 points will be deducted; If it is more than 100%, a fine of 2,000 yuan will be imposed, 3 points will be deducted, and the vehicle can be impounded at the same time.

According to Article 106 of the Road Traffic Safety Law:

If the highway passenger vehicle exceeds the approved occupants and the cargo vehicle exceeds the approved load mass, the traffic management department of the public security organ shall detain the motor vehicle in accordance with the law, and the driver shall transfer the overloaded passenger and unload the overloaded goods, and the cost shall be borne by the driver or owner of the overloaded motor vehicle.

1.Capacity: tons Compartment size: length = m width = m.

2.Capacity: 2 tons Compartment size:

Length = m Width = m Height = m 3Capacity: 3 tons Compartment size:

Length = m Width = m Height = m with lifting device Compartment size: length = m Width = m Height = m 4Load capacity:

5 tons Car size: length = m width = m height = m.