What is a rate tender, what is a rate tender, and how is a rate tender conducted?

Rate tenders: construction management fees, fees, and profits.

1 rate tender.

It refers to the tenderer in the bidding documents of the construction project.

The bidder is clearly required to bid for the total cost of the project in the bidding **, and the bid evaluation committee will mainly bid for the rate reported by the bidders, combined with the reported construction period and quality commitment, and the construction organization design.

and other relevant indicators such as the construction performance of the enterprise, and finally determine a bidding method for the winning bidder.

2. The rate bidding is divided into technical bids.

and commercial markings.

1) Technical standard assessment methods:

The bid evaluation committee did not find any errors in principle in the bid evaluation process, and the technical bid scheme was qualified

Tenders that occur in one of the following situations will be regarded as unqualified technical bids:

The bidding documents cannot respond to the requirements of the bidding documents (quality and construction requirements);

The layout does not meet the requirements, the same as the construction site.

inconsistent conditions;

Construction plan. Unreasonable, schedules and labor arrangements do not meet the construction requirements;

Other errors in principle (the content of the preparation does not correspond to the design drawings).

Reasonable and feasible to meet the requirements of the bidding documents of the technical standard, can participate in the competition of commercial standards, do not meet the requirements, the commercial standard will not be opened. However, technical standards are generally not scored.

2) Measures for the evaluation of commercial standards.

1. Design index system: list the indicators to be considered and their weights, such as rates (main indicators), bidder qualification levels, performance, construction period and quality commitments, construction organization design and other indicators.

2. Determine the standard rate: according to the actual situation of the project, with reference to the comprehensive fee rate of the project category issued by the cost management department, determine the floating range (that is, the qualified bid rate), and determine the standard rate on the basis of all qualified bid rates. If the bid rate is consistent with the standard rate, the item is a full score, and the larger the difference, the lower the score.

3. Evaluate the winning bidder based on the scores of each item.

Billing method. According to the measurement method of each project specified in the bidding documents, the actual completion quantity of the approved contractor is multiplied by the bidding rate of the project, which is the price paid for the project. The cumulative projects and the reimbursement part according to the facts are the settlement price of the completion of the general contract.

Rate bidding refers to the bidding activities of construction projects, the tenderer in the bidding documents clearly require the bidder in the bidding **, to the rate of the total cost of the project instead of the number of bidding, the bid evaluation committee to the bidders reported the rate-based, combined with the reported period and quality commitment, construction organization design and enterprise construction performance and other relevant indicators for a comprehensive review, and finally determine the winning bidder of a bidding method.

The so-called rate bidding is that the bidder submits the bid ** is not a real amount of money, but requires the bidder to report a percentage rate according to a fixed base number (different technologies for various types of projects, refer to industry standards). This is called a rate. Generally, service tenders are more common (engineering also exists, but they are rare).

Summary. Hello, according to the budget quota, the labor unit price is 39 yuan, and the material is calculated by the fixed base price or market information price.

How is the bid rate calculated.

Hello, according to the budget quota, the labor unit price is 39 yuan, and the material is calculated by the fixed base price or market information price.

I don't understand. A project budget of 1 million, the bidding agency bids for the rate of bidding. I'm going to use 900,000**, so what's the rate.

Bidding** service charges are calculated according to the progressive method of differential rating rate. The total fee for bidding more than 1 million yuan is 10,000 yuan.

How much is the direct rate.

1,000,000 yuan (500-100) 10,000 yuan (1000-500) 10,000 yuan (5000-1000) 10,000 yuan (6000-5000) 10,000 yuan, total charges = 1 + 10,000 yuan).

Rate year code bidding.

It refers to the tenderer who is old in the bidding documents.

It is clearly required that the bidder in the bidding, the rate instead of the total cost of the project bidding, the judges to the bidder's rate-based, combined with the construction period and quality commitment, construction organization design.

and performance and other indicators of comprehensive review, and finally determine the winning bidder of a bidding method.

Scope of application: 1. The design is not completely completed, and the design is carried out while the construction is carried out; 2. The project is determined but the drawings have not arrived; 3. Rush the deadline.

Advantages: 1. It saves the most complicated process of calculating the project cost (the bid reserve price or the bid price includes the carrying price), so that the bidder's bidding and pricing work becomes very simple, and can effectively prevent the leakage of the bottom of the bid and the manual operation. 2. The bid evaluation route is relatively simple and fair, and the black box operation is reduced.

3. Since most of the projects have to change the original design drawings in the implementation, the fixed base price of the project can be calculated and completed according to the visa and drawing changes, and then multiplied by the bidding rate to obtain the project cost. 4. The cost of the project can be effectively controlled, and the tenderer can according to the average level of the market, the financial situation, the construction environment, and the market risk.

Factors such as project quality and construction period shall control the percentage of reasonable decline in the cost of the project.

Risk: 1 The risk of the tenderer: the main drawback is to ignore the "beforehand" control of the project cost, which may cause over-investment.

Only the indirect cost that accounts for a small proportion of the total cost of the project can not be effectively controlled. The owner needs to invest a lot of project cost or technical personnel to check the project quantity. In short, the rate bidding has high requirements for the project management level of the tenderer, which is easy to cause the investment to get out of control.

2 Bidder's risk: The risk to bidders is small.

Rate bidding, refers to the bidding activities of construction projects, the tenderer in the bidding documents clearly require the bidder in the bidding documents, to the rate dust code (construction management fees and profits and other indirect costs in the percentage of the direct cost of the project) instead of the total number of the project for bidding, and the bid evaluation committee to the bidders to the rate reported, and combined with the construction period, quality and other commitments, construction organization design and construction enterprise performance and other indicators for a comprehensive review, and finally determine the winning bidder of a bidding method.

It can be seen that it is basically the same as other bidding methods, the only difference is that it is not the total project **, but the rate! It is suitable for: projects where the design is not completely completed, and the construction is regretted while designing; Projects where the project is determined but the drawings are not available; The project is on schedule.

What does it mean to bid 8% at the rate.

What does 8% rate bidding meanRate bidding refers to a bidding method that takes the bidding rate as the evaluation standard, and is mostly used for third-party service procurement. The bidding documents require that the floating rate is not less than 50%, which means: the bidder is the lowest bidder who makes a profit in accordance with the relevant charging standard rate is 50%; For example, the rate standard for the charge of a service project is 3/1000, and the bidding cannot exceed 1.5/1000; The concession interest rate in the bidding section is not less than 50%, that is, the concession interest rate is more than 50%, and the lower limit of the period interval is 50%.

In the process of reporting, it is more appropriate to report 60%, and if it reports 40%, the standard will be scrapped.

You read the encyclopedia, in addition to this paragraph, there is also below.

Rate definition. The rate refers to the percentage of construction management fees, fees and profits in the direct cost of the project (the fee is a non-competitive fee and is recorded as a real amount).

Features of rate tenders.

The characteristics of rate bidding are that the bidding is fast, but there are many problems in implementation and troublesome settlement.

This is very clear, assuming that the total cost of a project is 1 million, and the bidders report the rate required to undertake the project, according to the inverse proportion of the high and low scores, 5% of A, B, and C. Second.

**Highest score.

Hello, rate bidding refers to the bidding activities of construction projects, the tenderer in the bidding documents clearly requires the bidder in the bidding **, the rate of the rate instead of the total cost of the project to bid, the bid evaluation committee to the bidders reported the rate-based, combined with the careful reporting period and quality commitment, construction organization design and enterprise construction performance and other relevant indicators for a comprehensive review, and finally determine the winning bidder of a bidding method.

What is a rate tender and how is it conducted?

Dear, I am happy to serve you, the rate of bidding is a banquet refers to the bidding activities of the construction project, the tenderer in the bidding documents clearly require the bidding split hand silver in the bidding **, the rate of the rate instead of the total cost of the project to bid, the bid evaluation committee to the bidders reported the rate of the main, combined with the reported period and quality commitment, construction organization design and enterprise construction performance and other relevant indicators for a comprehensive review, and finally determine the winning bidder of a bidding method. The bidding method is to take the rate as the main factor, and conduct a comprehensive review in combination with other relevant indicators such as the reported construction period and quality commitment, construction organization design and enterprise construction performance. Hope it helps!