What brand of brake pads is good, and what should I pay attention to when purchasing?

There are many good brands, such as Golden Kirin, Xinyi, Bosch, Tianhe, etc., to buy brake pads, the first to look at the friction coefficient, the second to see the safety, the third to see the automatic comfort, is to see the service life of the brake pads.

To buy brake pads, the first thing to look at is the friction coefficient, the second is to look at the safety, the third is to look at the automatic comfort, and it is to look at the service life of the brake pads.

Among the types of brake pads, you should choose whether there are other components. There are several major brands of brake pads currently on the market.

1, Bosch 2, Temington 3, Brembo 4, Firodo 5, Yourui

6, USA TRW 7, US Adecco 8, China Golden Kirin 9, China Xinyi 10, Japan Akibolo.

These top 10 brands are the best and have the highest market share.

Friction plate will often be used in the process of driving, its reliability requirements are relatively high, if the use of friction plate that is not fully verified, after a period of time, there may be problems such as friction plate cracking, brake disc damage, etc., these problems cause the vehicle to shake when braking, and the heavy cause brake failure.

To develop a friction plate, we must first consider its friction coefficient and effective braking radius to ensure that the braking performance of the whole vehicle (pedal feeling, braking distance) meets the standard, and it is also necessary to verify the reliability of the friction plate (4w km multi-road condition cycle road test), noise performance (bench & cycle road test) and so on. In general, the development of a qualified brake is a very rigorous and complex task, and the development of friction pads is an important part of it.

Different formulations of friction plates, their compression ratio, wear resistance, friction coefficient and so on are different, rash use of unproven non-original friction plates is unsafe practice, may affect braking performance and even endanger life.

It is recommended to use the original friction plate purchased through regular channels, which can be replaced once in 2-3 years (3-50,000 kilometers) normally, of course, it is still subject to the actual wear and tear! Nowadays, cars are equipped with alarm devices (mechanical or electronic), please read the vehicle manual in detail to grasp the information to determine whether the friction plate needs to be replaced.

The car nanny came to the door to change the brake pads, and only closed the working hours.

Contact repair for so many years, to introduce to you the major brands of brake pads, a lot of car original standard brake pads, why each car manufacturer uses a different brand, mainly because the product bidding is not selected, does not mean that the brake pads on the bidding are not good, car manufacturers consider the cost issue, just like the original engine oil, the car factory over the years, used Shell engine oil, after a period of time found that it was replaced by Castrol!

Here are some of the big brands of brake pads.

1.Firodo.

The father of brake pads, 80% of the original brake pads of automobiles are equipped with Firodo brake pads, and the quality is needless to say! It works great!

2.Doctor. Dr. is the world's largest spare parts dealer, such as auto parts, electronic products, power tools, automotive FMCG, have his figure, brake pads are also civilized in the world, the main original supporting BMW, Audi, Volkswagen, Porsche, Fiat, Ford, etc. Reliable quality and trustworthy.

3.Milky Way. One of the world's top ten auto parts manufacturers, the world's top ten automotive brake pad manufacturers, its performance and quality needless to say.

4.Deco. The world's largest parts buyer, in addition to brake pads, also has spark plugs, batteries, antifreeze, etc.

5.Brembo.

High-end car procurement products, used in F1, Aston. Martin, Maserati, Porsche, etc., high-end products.

6, Sasaki, Dongdong promotion is very powerful, a Japanese name of the domestic brand, as well as Golden Kirin, Wearer, Ramboshi, Qufu Tianbo and other domestic brands, good brake pads, wear evenly, do not hurt the plate, no abnormal noise, car nanny business stay.

Answer: Brake pads are generally composed of steel plates, adhesive insulation layers and friction blocks, and the materials are mainly metal, NAO and ceramic, as well as asbestos, which have basically been eliminated due to the presence of harmful substances. At present, the more famous brake pad brands are Bosch, Firodo, Brembo, Tymington, Trina, etc., relatively speaking, Bosch is a relatively good brake pad brand, reliable quality, superior performance, cost-effective, has a high popularity.

Bosch, a Fortune 500 company, is a world-renowned brake manufacturer with factories all over the world, and its products are produced according to strict quality standards. Whether in the field of individual components or complete systems, Bosch guarantees a high market coverage. It has a complete range of brake pads, and its products are designated as original parts by the world's major automobile manufacturers.

Brake pads will inevitably wear and tear during the use of the car, the car has a total of 4 front and rear brake pads, if the front and rear brake pads need to be replaced, then how much are these 4 brake pads? Brake pads are different according to the brand, model and material, and they are also divided into front and rear.

Taking Bosch brake pads as an example, the front brake pads of the Japanese model Toyota Corolla NAO material are about 240 yuan, and the rear brake pads are about 200 yuan, that is, the 4 brake pads of the whole vehicle are generally about 440 yuan. You can also replace it yourself, but it is more troublesome, you need to disassemble the tire, it is recommended to go to the store to replace it, you need to pay a certain amount of working hours, about 50-100 yuan.

It depends on what kind of car you have, the European car is cheap, you can choose Firodo and Bosch and TRW's low metal formula, the friction coefficient is about right, the heat dissipation is also acceptable, the friction material bonding backplane technology, the disadvantages of high temperature thermal attenuation almost, the metal formula may occasionally have hard spots and a little bit of noise, the advantage is that it is very cheap. The pursuit of performance and comfort can be connected to the back plate with Rebesto's composite ceramic formula, friction material barb, high friction coefficient, no noise and low dust, almost no thermal attenuation, which is the best technology for civilian use, with high disadvantages. If you need the cheapest and most durable, then buy a domestic ceramic formula, but the friction coefficient is very low, the thermal attenuation is reduced, and the friction material is also a bonded backplate, which is particularly hard and wear-resistant, but the friction coefficient is too low, and there is always friction when braking, so it is basically dependent on the consumption of brake discs to achieve a long replacement cycle, and it is not recommended to use.

Kirin brake pad check, I personally tested, poor quality control. Cherish life and stay away from the golden unicorn brake pads.

What's right is best.

The higher the friction coefficient of the car, the better the braking effect, but the non-modified car is still not used.

The original one is good.

Brake pads are mainly divided into semi-metals, less metals, and ceramics The best ones in China are Bosch AC Deke Xinyi brake pads, and I personally think that Xinyi's is not bad Bosch AC Many products are made by Xinyi.

Xinyi brake pads The old sound is too hard I suggest you use the golden unicorn.

Go to a professional tuning shop and take a look, there must be something for you, and there is a lot of money for this thing. What's right for you is the best.

The goods in the 4S store are so fake, there are a lot of high imitations now, choose a younger brand, I think CQHY's brake pads are quite good, they are all in the high-end, the comfort is not bad, and the braking effect is excellent.

In fact, there is no need to go to 4S to see, many kinds of repairmen at 4S have greedy goods, private goods, and finally the high cost of the owner is very worthless. CQHY not only does a good job of brake pads, but also the machine air filter air conditioning filter oil is a high-end product, the price tends to be parity, which is very affordable for our car owners.

I know Shini brake pads are good.

Look at your car model, go to the 4S store and ask.

The rear wheels don't want Tammington, the original car is equipped with this, garbage, 60,000, half of the front wheels, less than one-third of the rear wheels, and the grinding disc is serious. The original factory is dusty, it is said that the ash is good, and the grinding disc that does not fall ash is not lost, but how to explain the rear wheel Tammington, both ash and grinding disc. The repair shop recommends TRW, I heard that the original front wheel is TRW, which is more durable.

Golden Kirin, Xinyi, Saifei and other brands are easier to use, and if you want good braking performance, choose the Golden Kirin brand.

Brake pad brands are easier to use: Bosch, Youli, Firodo, and the methods of choosing brake pads are: look at the product packaging, look at the logo of the brake pad itself, and look at the surface quality of the brake pad.

Domestic brake pads Golden Kirin, Xinyi, Saifei, Leopard these brands have the best sales, relatively well-known is the Golden Kirin brake pads, the market share occupies a large market, and the quality is relatively reliable. The choice depends on personal needs, not simply consider the choice of brake pads, after comparing the brake pads, choose the most suitable brand for your own use.

Domestic Xinyi, Golden Kirin, Xingyue, Zhengda brake pads and so on. When choosing a brake pad brand, we only need to follow the car factory to choose, and there will be no mistake. There are some technical indicators that car factories need to meet when choosing brake pads:

service life; Noises; Comfort; thermal expansion; thermal decay; Compressibility; does not hurt the disc; Environmental protection.

Our domestic Baiyun brake pads are used well, and the models are relatively complete. Produced by the old factory, the quality is still the best. Abroad, it's Japan, and there's Brembo in Italy.

There is only one indicator of hard power, that is, whether it has the qualification of the original factory. Brake pads are not afraid of 10,000, just in case, you must choose carefully.

International brand matching:

Xinyi's high-end ceramic brake pads are supplied to TRW and Volkswagen and Chrysler.

Greley's high-end Nexperia brake pads are supplied to TRW, ATE and Mercedes-Benz.

Hongyu Chuanyu series brake pads, the factory for TRW (TRW), Continental (ATE) and Honeywell.

Annette brake pads, the factory to Honeywell to match.

Baofeng, the factory is supporting Fiat Chrysler.

Domestic matching:

Golden Kirin brake pads, hard brand international supporting less, but domestic car companies supporting a large number.

Xingyue brake pads are more supporting for domestic car companies, and they also cooperate with many auto parts chains.

Guanliang brake pads are also mainly used by domestic car companies.

Choose any one of these supporting qualifications, and the quality can be guaranteed.

Changing brake pads or changing big brands hundreds, such as domestic Xinyi, Golden Kirin, etc., they are all domestic first-line brands, when choosing brake pads, the product is generally required to meet some technical indicators:

1. Service life: Extend the service life as much as possible and reduce the frequency of replacement.

2. Noise: Whether it is emergency braking or normal braking, light braking or continuous braking, it can not produce harsh noise.

What we recommend to our customers at the moment is an American formula of all-fiber brake pads, which dissipates heat well and does not produce black powder that is difficult to clean;

What are the brake pads with a good reputation? How to choose the right brake pads? Semi-metallic friction material, very used in family models.

It is characterized by good heat resistance, high power absorption per unit area, and high thermal conductivity. Each brand of brake pads has its own characteristics and functions, and the most important thing is to see what type of car it is used in. Start with the roughness of the surface of the brake pads, too rough will cause the wheels to lock up, lose control of the direction and burn the pads during the braking process, and if it is too low, the braking distance will be too long.

A foreign Filodo, Timington, Urui, Golfa, Archipolo, Nisshinbo (referred to as NBK, not FBK, hot promotion in China), Advics, Believe, Sailong, Astermo, as well as domestic Xinyi, Gree, Shuanglian, etc., among which are the strongest brake pad manufacturers, the others are slag. The brake pads of top caliper manufacturers such as TRW, Bosch, ATE, and Brembo are very good.

Bosch Germany. Bosch's braking system matches most of the world's car manufacturers, including: Alfa Mirio, Audi, BMW, Citroen, Ferrari, Field, Ford, Nissan, Toyota, Honda, Suzuki, Mercedes-Benz, Opel, logo, Porsche, Renault, Luhua, Saab, Volvo, Volkswagen, etc.

Its strength can be seen.

Choose regular manufacturers to produce products; Choose professional installation, the packaging box of the brake pads produced by regular manufacturers, there is a logo of its own brand, which clearly indicates the model, friction coefficient, production number, production batch, production date, etc. of the brake pads.