How to set the bandwidth control of Mercury MW310R, it is to limit the other network speed 30

Mercury MW310R Set Bandwidth Control Method:

1. Enter the router management IP in the browser, default, press enter;

2. Enter the router administrator account and password, click OK, and the default is admin;

3. Click the "IP Bandwidth Control" link on the left, check the "Enable IP Bandwidth Control" checkbox on the right, and then enter the actual downlink bandwidth and downlink bandwidth of the user's broadband.

4. Click to add a new entry, which belongs to the IP address access to be restricted, just enter the last set of numbers, select the mode to limit the maximum bandwidth, and enter the maximum value of the limit after the bandwidth size;

5. You can add multiple rules repeatedly, and finally click the "Save" button to save the settings.

Ordinary routing and software do not have much effect even if the speed is limited, the key is to solve the main application under a variety of applications is not affected, so you had better change to an intelligent QoS route, although the ordinary route can limit the speed, but can not guarantee the delay of the game, the browsing of the web page, because to do**game web browsing does not interfere with each other, simple speed limiting is not enough, but also to set up a guarantee bandwidth, limit the maximum number of connections, turn on burst traffic, set priority, set the game port priority, turn on small packet sending** Priority and so on. Generally, these functions can only be achieved by intelligent QoS routing. It is recommended that you buy an intelligent QoS behavior management route, and you can even directly block others from watching**,**etc.

1. To limit other people's network speed, you must first log in to the router and enter the bind MAC option to bind the MAC address.

2. Remember the MAC address (someone else's address) IP that needs to be bound, and then enter the bandwidth control option, and limit the speed for the IP address of someone else who has been bound.

By entering the router's settings page, you can see that there is an IP bandwidth control in the settings page, just in there, the easiest way is to update 360 to the latest version, there is a router guard inside, and you can directly limit the speed inside.

The Mercury MW310R router cannot set some wireless WiFi speed limits, only all of them.

2. Enter the correct username and password to enter the router management background.

3. We need to check the existing IP and the corresponding MAC address bar first. Click "DHCP Server" on the left, select "Client List", and write down the corresponding IP and MAC addresses displayed on the right.

5. Enter the correct corresponding MAC and IP address on the right, then select "Status" as "Effective", and then click the "Save" button to save.

6. Repeat the previous two steps until all IPs are added.

7. Click the "IP Bandwidth Control" link on the left, check the "Enable IP Bandwidth Control" checkbox on the right, and select the correct network speed below.

8. Then fill in the IP and bandwidth size to be controlled in the following rules, and also set your own computer "Guarantee minimum bandwidth", and select "Enable" for all, and then click the "Save" button to save all the settings.

Enter the IP you want to restrict in the IP segment, and enter the uplink and downlink speed limit below, and you can confirm it.

Enter the router management interface, there is an option for IP bandwidth control, enter someone else's IP to limit the network speed.

Go to the router, turn on IP broadband control, and add the IP address of the computer you want to control in the control rules.

If you don't use it, turn it off, and if you use it, set a password.

If DHCP is not enabled, a static IP address is set for each computer.

If you enable bandwidth control, the total uplink bandwidth is 512 kbps, and your downlink network is 8 Mbit/s, write 8,000 for 8M, and write 10,000 for 10M.

Fill in the IP address range before and after the IP address segment of the machine you need to limit the speed, the port segment is 1-65534, the protocol is all, the priority remains the same, the uplink is 512kbps, the downlink you want to limit the speed is 800kb s, then write 6500kbps, the front and back two can be filled in the same, and the route can be restarted after saving.

1. Turn on all the computers that need to access the Internet, select static address assignment, and specify IP addresses for all devices.

2. Turn on the broadband control. Widen the new entry, and set the maximum downlink bandwidth of 2400 for the IP addresses of other devices except the host, because the unit is about 8Kbps because the unit is 1KB

3. Save and restart the router.

Hello! Here's how to set up a wireless router:

1. Enter the router address, connect the wireless router, enter the address you see on the router in the browser, generally of course, if your home is using ** online network, then you need to prepare an additional modem, commonly known as "cat").

2. Enter the corresponding account password, and after entering, you will see that you have entered the corresponding account and password.

3. Select the Setup Wizard, and then enter the operation interface, you will see a Setup Wizard on the left, and enter (generally pop up automatically).

4. Enter the Internet mode setting and set the interface of the wizard.

5. Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed.

6. Enter the account password, select PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, there will be an account number to open broadband, fill it in OK.

7. Set the password of the router, and then enter the wireless settings after the next step, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill it in casually, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

8. The next step is to set it up successfully.

9. Click Done, the router will automatically restart, at this time you should wait patiently. The interface that appears after success.

10. How to connect the mobile phone to wifi is simpler, when your router is set up, click the menu key of the mobile phone, and then enter the mobile phone settings, the first item is wifi, and then you set it to on, click to enter the wifi list, and select the wireless network name set in your previous router. Enter the password you set earlier to connect.

Summary: How to use a wireless router, is a more common problem, but also a relatively simple problem, I believe that as long as you have an experience, you can also become a god, of course, the router settings are far from these simple content, there are more setting options after logging in to the router settings page, set other options, such as binding MAC address, over IP, firewall settings, etc., can make your wireless network more secure, to prevent being rubbed off the network.

1. Log in to the management interface: open the browser on the computer, then enter "and press the enter key" in the address bar, enter the username and password in the pop-up dialog box (both are admin by default), and click "OK".

2. Run the Setup Wizard: The "Setup Wizard" interface will automatically pop up when you log in to the configuration for the first time, if it pops up, you can click the "Setup Wizard" in the left menu to activate it - >Next".

3. Choose the Internet access method: Please choose according to your network access method, at present, most of the Internet access methods provided by domestic ISP broadband operators for ordinary users are "PPPoE (ADSL virtual dialing)", and this example is also demonstrated in this way. (ps:

If you are not sure how you can access the Internet, please consult your broadband operator).

5. Wireless settings: "Wireless Status" select "On" - SSID "User Defined Settings - >Wireless Security Options" select "WPA-PSK WPA2-PSK" - PSK Password" (that is, the verification password for connecting to the wireless network), and user custom settings - > click "Next".

6. Restart the router: Click "Restart".

After the MW310R wireless broadband router is rebooted, the Internet access parameters and wireless network just configured will take effect, and users can connect to the MW310R router to access the Internet by wired or wireless.