Why can IPTV be watched while the router doesn t have a network

1、First of all, check whether the computer has a network cable interface:Now high-end network TVs are equipped with network interfaces,If there is,You can connect the network cable to the router or repeater,You can debug it on the network TV。

2、If it is a TV with an installed system,It should be equipped with a wireless network,As long as the network cable is connected to the wireless router,You can use the TV to connect to the network,**Corresponding software,**Network TV。

3、If the TV is a TV that cannot be connected to the Internet,You can connect the TV with the computer host,Use computer software **TV,But this method is not recommended。

4. If you can't connect to the Internet, you can buy a network TV set-top box. Connect the network set-top box to the TV network cable, and use the wireless or wired connection cat and the network set-top box to use the network to watch TV.

The router needs to be set up before it can be used

One end of the network cable is connected to the LAN port of the router and the other end is connected to the network port of the computer.

Open the browser and enter the router account number and password as written on the router box or manual.

Point Setup Wizard.

Broadband connection type: PPPoE

Enter your broadband account number and password.

After the settings are set, one end of the network cable is connected to the LAN port of the modem, and the other end is connected to the WAN port of the wireless router.

Note: If you want to change the wireless device name SSID and WiFi password, you can select the wireless settings menu item settings.

1. Whether the network cable is in poor contact with the network interface of the router and the TV causes the TV to be disconnected.

2. Whether the router is running incorrectly or malfunctioning, causing the TV to be disconnected.

3. Whether the network line and server of the network service provider are interrupted or faulty, and the router cannot connect to the network, in this case, the TV will inevitably be disconnected, and it is necessary to contact the network service provider to solve the network transmission problem first.

4. After the above problems are investigated, the TV is still disconnected, which can generally be judged as the network port failure of the TV, the connection line between the motherboard and the network port is interrupted, and the parts of the motherboard are faulty.

The main reason is that the network is not available. You can check whether the network cable is not plugged in properly and whether the router is normal. It is also possible that the IP address is not obtained, so you can restart the router.

Hello dear, 1. It may be caused by incorrect network connection settings. Due to the complexity of the network connection settings, even if the TV display has been connected to the network cable, but if the network settings are wrong, it will also lead to no network. 2. The router equipment is damaged and damaged.

If you need to use the cable TV normally, you also need to rely on the router device to connect. Once the router device is damaged,Even if the TV has been connected to the network cable,It is also impossible to sense the network,So there will be a phenomenon that the network cable is connected but the TV has no network。 Suggested workaround:

1、If you can't connect to the network because of the wrong network settings,First of all, you need to restore the TV network connection to factory settings,Clear all the previous settings。 Then re-set the relevant parameters of the router,After the setting is completed,Open the TV's system settings page,Find the network settings,Then choose to automatically get the network IP address,Click to complete,The TV will automatically identify the new network signal and get the IP address assigned by the router,At this point,Network TV can be restored to normal use。 2、To confirm whether the router equipment is damaged,It is generally recommended to remove the old router first,Then replace the new router equipment,Then try to see if the TV network can be connected normally,If you can,Prove that the network cable is indeed connected but there is no network caused by the damage of the router equipment,Just replace the new router to solve the problem。

If the TV shows that the router is not connected, the search state may be due to the following reasons:1If the router is out of range of the TV's Wi-Fi signal, you can try to move the router or TV location.

2.The Wi-Fi password was not entered correctly. Please re-enter the correct Wi-Fi name and password.

3.A faulty router causes the TV to not connect. You can try restarting your router or replacing it.

4.The TV's Wi-Fi function is turned off and off, and you can turn this feature on in the TV menu. In short, if the TV fails to connect to the Wi-Fi network, you need to first determine whether the device connected to the router (such as the TV) is within the Wi-Fi signal range of the router, second, check whether the correct Wi-Fi name and password have been entered, and finally check whether the connection fails due to a router failure or the TV's Wi-Fi function is turned off.

Summary. Hello dear,Why can't the TV connect to the router1、There is a problem with the network reception of the TV,You need to contact after-sales,Find professional maintenance personnel for maintenance。 2. The router is set up and the TV equipment is blocked.

The TV device shows an unknown device in the router, and it is likely that it is blocked by the router. At this time, you only need to enter the router settings,Turn on the shield,The TV can go online。 3. The TV is too far away from the router, and the signal is weak, resulting in no connection.

When the mobile phone is too far away from the router, that is, the wifi signal source, it will lead to a weak signal, either the network speed is very slow, or the connection is intermittent, or even unable to connect to the network, the same is true for TV, when the TV is too far away from the router, it will also cause the TV network to be unable to connect.

Hello dear,Why can't the TV connect to the router1、There is a problem with the network reception of the TV,You need to contact after-sales,Find professional maintenance personnel for maintenance。 2. The router is set up and the TV equipment is blocked. The TV device shows an unknown device in the router, and it is likely that it is blocked by the router.

At this time, you only need to enter the router to set up the travel Xunxiang place,Turn on the shield,The TV can access the Internet。 3. The TV is too far away from the router, and the signal is weak, resulting in no connection. When the mobile phone is too far away from the router, that is, the wifi signal source, it will lead to a weak signal, to dismantle the fight, either the network speed is very slow, or the connection is intermittent, or even unable to connect to the network, the same is true for TV, when the electric Chang is too far away from the router, it will also cause the TV network to be unable to connect.

4、TV network such as the book spike card failure,At this time, you can detect it,For example, in the case of the TV without a sail to connect to the network,Find a network cable to connect the TV and the router to try,If you can,It is the TV network card that is faulty,You need to replace the TV network card in time to solve the problem。

The TV system is unstable,It may be that the system files conflict,So you can't connect to the wireless router,You can consider turning off the TV first,Turn off the router after the rubber is finished。 After that, turn the TV back on, and you should be able to connect to Liang Shiqin again on the wireless router to watch TV.

If you are still connected to a wireless router wirelessly, you can consider restoring the operating system of your TV. Take it.

Restore to the factory settings, and then enter the password again to connect.

If the above two methods cannot solve the problem, then you can apply for a return after sale.