How to reset the administrator password for fingerprint lock?

Resetting your admin password is as simple as finding a small round button on the side of the back panel. Usually, the small, round button is located under the battery cover plate. Press and hold for more than three secondsFactory reset

After resetting the administrator password and adding normal users, the initial password manual will be marked after resetting the factory settings.

Fingerprint lock to add password.

Touch the touchscreen and enter * in the operator interface when the screen lights up. prompted, enter the administrator information, which is the password. Enter 2 and select General User Settings.

Enter 1, and then select Enter Normal User. Enter a new user number. Be careful not to reuse with other users.

Enter your fingerprint twice when prompted. If the input is successful, press * to exit.

The fingerprint lock has three groups of administrators: fingerprint, proximity card, and password. Once the fingerprint lock is installed, the admins of each group will be set accordingly so that the admins can verify the fingerprint admins so that they don't forget the password.

Mi Door Lock can directly add residents to reset the old password by setting a new password, and the setting method is as follows:

2. After entering the security code, wait for the Bluetooth connection of the phone to the door lock.

3. Click "User Management".

4. Click " " in the lower right corner

5. Click "Normal User" (if you want to add an administrator, click "Administrator").

6. After entering the new user page, you can add fingerprint and password here, here is to add password as an example. Click on the " " to the right of the password

7. Enter the 6-10 digit unlocking password, click "Continue", enter the password again, and click "Finish".

8. Click "Done" at the bottom of the page.

The details are as follows:1Click and enter the "Management Mode" of the fingerprint lock, press "1", and select "User Settings";

2.In the "User Settings" interface, press "1" and select "Add User".

3.In the "Add User" interface, press "2" and select "Add Password".

4.Enter a new password and end with " ".

Hello, how do I reset the administrator? Could you please help me figure it out?

Restore the factory settings of the fingerprint lock first, and then reset the administrator password with the initial password.

1. If you forget the smart lock.

Administrator password, factory reset required.

Reset the administrator password.

2. Open the battery cover on the back panel of the smart lock and find that there will be a small black dot under the battery.

3. Use the tool to press and hold the small black dot to successfully restore the factory settings, and the administrator's password will change back to the initial secret banquet limb code, which can generally be found in the manual.

4. Re-set the password according to the smart lock prompts, enter the fingerprint and unlock password.

Fingerprint lock is a kind of intelligent lock with the fingerprint of the human finger as the identification carrier and means, which is the perfect crystallization of computer information technology, electronic technology, mechanical technology and modern hardware technology. Fingerprint locks are generally composed of two parts: electronic identification and control, and mechanical linkage system.

Dear, very high vertical then Yanxing will answer for you: The fingerprint lock resets the administrator password as follows; 1. Factory initialization, press the Yuyu touch button on the motherboard, and after hearing the prompt "Enter Initialization", operate according to the system staring prompt. 2. Enter the password to open the door, press the "Add" button, and after the prompt sound, "Enter the management password, end with the number".

3. After entering the management password, enter the door opening password, press the number key to confirm, re-enter the door opening password, and press the number key to confirm. 4. Enter the fingerprint of the door opening, press the "Add" button, and after the prompt sound, "Enter the management password, end with the number". 5. After entering the management password, press the fingerprint, after a successful entry, it prompts "enter again", and press the fingerprint again to enter successfully.

Summary. Hello, the fingerprint combination lock changes the administrator and password like this<>

Hello, the fingerprint combination lock changes the administrator and password like this<>

One. Fingerprint password lock replacement administrator.

1. To use the function of "restore factory settings", the general buttons (reset, reset) are under the battery of the good board friend slag finger at the back, and some need to dismantle the battery shell to see it.

2. Press the reset button on the long hunger book, and it will show whether you need to restore the factory limb on the front panel, and then follow the prompts on the panel Bu Hong to operate on the panel. <>

Two. How to change password:

When the screen lights up, press and hold the key, and then enter the door opening password and management password to enter the manager mode. Then press the option to enter and change the password of the door opener, enter the new password (4-8 digits), press the button to confirm, repeat the new password, and press the key again to complete the modification of the new password for the door.

Enter the door opening password and press the "Add" button, after the prompt sound, "enter the state ruler loss management password, and dismantle the bundle with the sail god"; After entering the management password, enter the door opening password, press the number key to confirm; Re-enter the door opening code and press the number button to confirm.

Summary. Hello, glad to answer for you. How to change the administrator's fingerprint for the fingerprint lock.

1. Touch the button position with your palm and press the random code (what is displayed).

2. When all the keys are lit up, press the setting key, select Manage Fingerprint or Magnetic Card, and after successful verification, the door lock will enter the voice main menu.

3. Select Change Management Fingerprint, and then press the Confirm button to confirm the change.

4. At this time, the fingerprint window light will light up, the blue light of the light bar will flash rapidly, press the new management fingerprint during the flashing of the small light on the fingerprint lock, and the blue light of the light bar will be on for 1 second at the same time, the fingerprint light will be off, and the finger will be removed; Enter the same fingerprint 3 times in a row.

5. If the fingerprint lock prompts "Replacement successful, the original management fingerprint has been deleted", press the setting key to return to the settings menu.

How to change the administrator of the fingerprint lock.

Hello, I am inquiring for you here, please wait a while, I will reply to you immediately

Hello, glad to answer for you. How to change the fingerprint lock of the administrator fingerprint 1, touch the button position with the palm of the hand, press the random code (what to display) 2, press the setting key when the keys are all lit up, select the management fingerprint or magnetic card After the verification is successful, the door lock enters the voice main menu. 3. Select Change Management Fingerprint, and then press the Confirm button to confirm the change.

4. At this time, the fingerprint window light will light up, the blue light of the light bar will flash rapidly, press the new management fingerprint during the flashing of the small light on the fingerprint lock, and the blue light of the light bar will be on for 1 second at the same time, the fingerprint light will be off, and the finger will be removed; Enter the same fingerprint 3 times in a row. 5. If the fingerprint lock prompts "Replacement successful, the original management fingerprint has been deleted", press the setting key to return to the settings menu. Tips:

When operating by yourself, never lock the door to avoid setting errors; Resulting in not being able to open the door! It is recommended to find professional customer service and master to guide the operation!

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

If you're not an administrator, you'll need to be in the room to change it.

This requires the function of "factory reset", and the general button (reset, reset) is under the battery on the rear panel, and some need to remove the battery case to see. Press and hold the reset button, and it will show you whether you need to restore factory settings on the front panel, and then you can operate it on the panel.

Here are the locations of the two designs:

Reset hole 1: Reset hole 2:

Some fingerprint locks can be implemented on the front panel, but administrator permissions are required, and users cannot.

You can restore the factory and re-record fingerprints, but then there will be no fingerprints for your wife, and she won't be able to open the door when she gets home.