How to take the forklift test, where to find information?

The content of the forklift driver practical test is divided into two items, pile test and road test. The pile test is to use the prescribed pile rod in the pre-set size standard site, according to the prescribed driving route (including the specified attachments) driving and operation, its purpose is to test the trainees' ability to control the vehicle safely.

The purpose of the road test is to test the trainees' mastery and application of the practical skills they have learned, their ability to adapt to the road surface and the ability to deal with incidents.

Among them, the pile test is divided into two stupid service items, the "8" character driving assessment and the fork load "work" character driving assessment, each of which is tested in the form of a 50-point system and mistake deductions. The road test is divided into two kinds of results: "pass" or "fail", and the evaluator directly determines the "pass" or "fail" according to the test standards and the actual operation of the assessment object (currently not implemented).

Legal analysis]: The conditions for applying for the forklift license are: 1. Over 18 years old; 2. Have a cultural level that is suitable for the type of work you are applying for; 3. Be in good health and meet the special physical requirements of the type of work you are applying for; 4. Have corresponding safety technical knowledge and skills; 5. Have work experience suitable for the type of Huaishan applied for; 6. Meet other requirements stipulated in safety technical specifications.

Legal basisArticle 10 of the Measures for the Supervision and Administration of Special Equipment Operators shall meet the following conditions: (1) Be over 18 years old; (2) Be in good health and meet the special physical requirements of the type of work to be engaged in; (3) Have an education level that is appropriate to the type of work being applied; (4) Have work experience that is appropriate to the type of work you are applying for; (5) Have corresponding safety technical knowledge and skills; (6) Comply with other requirements stipulated in the safety technical specifications.

The specific conditions of the operators shall be implemented in accordance with the provisions of the relevant safety technical specifications.

Summary: The forklift license should be handled by the local quality and technical supervision department.

To apply for a forklift driver's license, you need to consult and register with the quality supervision and management department where the household registration is located, and then pass the theoretical examination and practical examination of the forklift license of the Quality Supervision Bureau to obtain the forklift license. Forklift licenses are generally not allowed to be handled in other places.

The forklift driver's license is not issued by the public security traffic management department, but by the quality supervision and management department, and it is useless to go to an ordinary driving school for consultation. This is mainly because forklifts are special equipment, which are managed by the quality supervision and management department, and the required certificates are also issued by the quality supervision and management department.

Introduction to Forklift Driver's License:

As the name suggests, a forklift driver's license is a necessary professional certificate for forklift drivers. Forklifts play a very important role in the logistics system of enterprises and are the main force in material handling equipment. It is widely used in stations, ports, airports, factories, warehouses and other sectors of the national economy, and is an efficient equipment for mechanized loading and unloading, stacking and short-distance transportation.

Answer pro! Hello there, I'm Blazing Rock, and I'm happy to answer your questions! I've seen your question, I'm handwriting and typing the answer, it may take a while, please wait a while! Don't be in a hurry

Hello, how to apply for forklift operation license:

Information to be provided by the applicant: 1. Health certificate of a medical institution at or above the county level;

2. Proof of participating in safety technology training from institutions with training qualifications.

Acceptance: Accepted by the safety supervision window of the administrative service center.

Review and assessment: The Education and Training Department will review the relevant information of the applicant, apply for the question card from the question bank of the Provincial Bureau Examination Center, and assess the applicant; Send the applicant's answer sheet to the provincial bureau for electronic marking.

Approval: Approval by the leader in charge.

Review: Fill in the provincial special operations personnel operation qualification training assessment form and report to the provincial bureau for review.

Certification: Issued by the safety supervision window of the administrative service center

How should I take the test?

There are: forklifts, forklifts, cranes, grab trucks, loaders, excavators, road rollers, bulldozers, graders, dump truck and mine electric locomotives are all issued by the Quality Supervision Bureau, and the operation certificate of the book is now the whole country as long as it is true.

There are special training schools, and you can go to register for the exam and pass it.

Requirements: It is required to be in good health, and there is no obstacle that medical medicine considers impossible to drive a forklift (this depends on the results and conclusions of the physical examination).

Materials: ID card and 2 copies of ID card, four color **, one black and white photo of one inch larger.

The registration fee is 57 yuan for the physical examination after registration (may vary from place to place).

Process: A: There are two tests: written test and car test.

If you fail one of the subjects, you will have to retake the make-up examination, which costs 60 yuan. After passing the 2 examinations, the certificate will be obtained within 15 30 working days, that is, the "Vocational Qualification Certificate" issued by the Labor Bureau, and the "Operation Certificate" issued by the Technical Supervision Bureau will be reviewed once every 2 years.

It may vary from place to place, please consult your local labor department for details).

The annual review of forklifts requires: 1. 2 photos with a blue background of 2 inches.

2. A copy of ID card.

3. A copy of the certificate.

4. Continuing education performance form.

The forklift test is generally divided into three subjects, mainly the pre-operation inspection of the forklift, the start of the forklift, and the driving of the forklift.

Forklift test subject 1: forklift operation.

Examine. 1.Before and after forklift operation, the appearance should be checked, and fuel, lubricating oil and cooling water should be filled.

2.Check the safety performance of starting, operation and braking.

3.Check whether the lights and horn signals are complete and effective.

4.During the operation of the forklift, check whether the pressure and temperature are normal.

5.After the forklift is operated, it should also be checked for leakage and replaced in time.

Forklift test subject 2. Forklift starts.

Before starting, look around and make sure there are no obstacles to driving safety, then sound your horn before starting.

2.For vehicles with hydraulic (pneumatic) braking, the hydraulic (pneumatic) gauge must be safe before starting.

3.When the forklift starts to load the goods, the driver should first confirm that the goods carried are stable and reliable.

4.The start must be slow and steady.

Forklift test subject three.

Forklift driving. 1.When driving, the height of the bottom end of the fork from the ground should be maintained at 300 400mm, the mast.

Lean back. 2.Do not raise the forks too high while driving. When entering and exiting the job site or driving, pay attention to whether there are obstacles and obstacles in the air. When the load is driving, the fork is not allowed to rise too high, which affects the stability of the forklift.

3.After unloading, the fork should be lowered to the normal driving position before driving.

4.When turning, if there are pedestrians or vehicles nearby, give a driving signal first. It is forbidden to make sharp turns at high speeds, which can cause the vehicle to lose lateral stability and overturn.

5.It is strictly forbidden to turn off the ignition and slide when driving the forklift downhill, and it is forbidden to brake sharply while driving without special circumstances.

6.Forklifts should comply with the traffic rules in the factory when they are running.

A certain amount of safety distance must be maintained from the vehicle in front of you.

7.When the forklift is running, the load must be in the lowest position that does not hinder the driving, and the mast must be appropriately tilted back. Except for stacking or loading, the load shall not be raised.

1. Forklift license, also known as forklift special operation license, forklift driver's license, is a forklift operator must hold the certificate, before this certificate was issued by the Safety Supervision Bureau, from 2017 onwards, forklift driving allocated to the Quality Supervision Bureau for assessment and certification, so if you want to apply for the forklift license now, you need to go to the quality supervision bureau to register for the examination and take the exam.

2. Several materials that need to be carried for the forklift license: In order to save you from running too late, and strive for a one-time successful registration, it is recommended that you consult the staff before signing up to tell you the specific information you need to carry, such as a copy of your ID card, 4 2-inch **4 white backgrounds, physical examination forms, and application forms for forklift special operators.