How to properly connect the router to the home and the optical modem

You can try, light cat.

Pull out a network cable to connect to the WAN of the TP-Link router, and connect the upper 1234lan of the router to the network cable port behind the computer host. There is also the fact that you turn on DHCP, enter the router settings screen, and select the dynamic Internet mode. Remember to change your local connection to automatically get an IP address.

Follow-up: The HG850A GPON terminal is used.

It is a cell fiber user.

But it is directly connected to the cat.

Setup or can't access the Internet?

Can you connect the modem directly to the computer and set the IP on the computer? If you can, you can set up the router, if not, you can check whether the optical path is open.

Follow-up question: Log in to the router to enter the WAN settings, choose the PPPoe method to set up broadband and password, but it still doesn't work, connect to the optical modem with a single machine and click on the broadband My World can access the Internet, is it a problem with the router settings?

If you can connect the optical modem with a computer alone, that's a problem with the router settings, you follow the router's manual, if not, you can contact the router seller.

Follow-up question: There is no manual, you can use Unicom's ordinary broadband connection to this router, but the optical cat will not work, and I don't know if you need to buy a special router?

No, the routers are all the same, and you can see if you can ping the route after connecting these devices.

If it is connected to the LAN port, the router will be used as a switch, so you need to set it up when you set it up. Simple way, if it's me, borrow the WLAN port directly, then static IP, and then turn on wifi, test first. You can use that one.,It's a conflict to open that one can't be used.,If you start wifi, you need to turn on DHCP.,Otherwise, you won't get the IP yourself.,The landlord tries my method first.,That's how I use it.。

After the router is connected to the broadband modem, you need to go to the router background to set the parameters before you can use it.

Open the browser and enter the admin address, and then enter the default login password admin to log in to the background.

<> select Setup Wizard and click Next to enter your broadband account and password as prompted.

Then click Next to set the connection password and SSID of the wireless wifi.

Once the settings are complete, save and reboot and you're good to go.

The correct connection between the modem and the router is as follows:

Tools: Lenovo 510s, Windows10, Maxthon Browser.

1. Take a complete network cable and find the yellow port on the back of your modem.

2. Insert one end of the network cable into any of the four yellow ports.

3. Find the yellow port on the back of the router, and insert the other end of the network cable into the yellow port of the router, so that a simple optical modem and the router are successfully connected.

4. If you want to surf the Internet, the base core will enter the management address of this router on the computer, first set your administrator password in turn in the page of creating the administrator password, and click OK after setting. Withering.

5. Enter your broadband account and password in the second Internet settings interface, and then click the Next button.

6. Set the name and password of your wireless network in the third wireless settings interface, and click the OK button after setting, so that your router can be connected to the Internet.

Hello, I am happy to serve you and give you the following answers: 1. Correct connection method: (1) Connect the WAN port of the modem to the LAN port of the router; (2) Connect the WAN port of the router to the broadband access point; (3) Connect the LAN port of the router to a computer or other equipment; (4) Plug the power plug of the router into the power socket and turn the router on; (5) Insert the power plug of the modem into the power socket and turn on the modem; (6) Visit the management page of the router on the computer, set the router, and set the WAN port of the router to automatically obtain the IP address; (7) Visit the management page of the modem on the computer, set the modem, and set the WAN port of the modem to automatically obtain the IP address; (8) Unplug the power plugs of the router and the modem, plug them back in, and repower the router and the modem. (9) Visit the management page of the router on the computer and check whether the IP address has been obtained from the WAN port of the router. (10) Visit the management page of the modem on the computer and check whether the WAN port of the modem has obtained the IP address. (11) If the IP address is obtained from the WAN port of the router and the modem, the connection is successful and the broadband can be used normally.

2. Causes of the problem: (1) The connection between the router and the modem is incorrect; (2) The settings of the router and modem are incorrect; (3) The power plugs of the router and the optical modem are not plugged in properly; (4) The power plugs of the router and the optical modem are not plugged into the power socket; (5) The power plugs of the router and the optical modem are not plugged into the power socket; (6) The power plugs of the router and the optical modem are not plugged into the power socket; (7) The power plug of the buried router and optical modem is not plugged into the power socket; (8) The power plugs of the router and the optical modem are not plugged into the power socket; (9) The power plugs of the router and the optical modem are not plugged into the power socket; (10) The power plugs of the router and the optical modem are not plugged into the power socket; (11) The power plugs of the router and the optical modem are not plugged into the power socket; (12) The power plugs of the router and the optical modem are not plugged into the power socket; (13) The power plugs of the router and the optical modem are not plugged into the power socket; (14) The power plugs of the router and the optical modem are not plugged into the power socket; (15) The power plugs of the router and the optical modem are not plugged into the power sail service socket; (16) The power plugs of the router and optical modem are not plugged into the power socket; (17) The power plugs of the router and the optical modem are not plugged into the power socket; (18) The power plugs of the router and the optical modem are not plugged into the power socket; (19) Router and.

To connect the modem and router, you only need to plug the network cable into the interface of the modem and the router respectively.

Tools Raw materials: swift FW326R, network cable.

1. Prepare a complete and useful network cable.

2. Pinch one end of the network cable.

3. Insert the network cable at this end into the yellow interface behind the optical modem, and then pinch the other end of the network cable.

4. Find the dark blue interface of the router and plug the network cable into the dark blue interface.

Hello, I am glad to serve you and give you the following answer: The correct connection method between the modem and the router is:1

Connect the WAN port of the modem to the WAN port of the router and connect it with a network cable. 2.Connect the LAN port of the router to the network cable interface of the computer and use the network cable to connect. 3.Turn on the router and set the router's IP address, subnet mask, gateway, DNS and other parameters; 4.

Turn on the computer, set the IP address, subnet mask, gateway, DNS and other parameters of the computer; 5.Connect the router and the computer to the same network to ensure that the router and computer can access the network normally; 6.If there is a problem, you can try to reset the IP address, subnet mask, gateway, DNS and other parameters of the router and computer, or plug the network cable again and restart the router and computer to solve the problem.

Personal tip: When connecting the modem and the router, make sure that the network cable is connected correctly, and set the correct IP address, subnet mask, gateway, DNS and other parameters to ensure the normal operation of the network.

Hello, I am happy to serve you and give you the following answers: 1. Correct connection method: (1) Connect the WAN port of the modem to the LAN port of the router; (2) Connect the WAN port of the router to the broadband access point; (3) Connect the LAN port of the router to a computer or other equipment; (4) Plug the power plug of the router into the power socket and turn the router on; (5) Insert the power plug of the modem into the power socket and turn on the modem; (6) Access the management page of the router on the computer, and set the WAN port of the router to access the broadband access point and password; (7) Visit the management page of the modem on the computer, and set the WAN port of the modem to access the LAN port of the router; (8) Access the management page of the router on the computer, and set the LAN port of the router to access the computer or other devices; 2. Causes of problems:

1) The connection between the router and the modem is incorrect; (2) The WAN port of the router is connected to the broadband access point and the password is set incorrectly; (3) The WAN port of the modem is connected to the LAN port of the router, which is incorrect. (4) The LAN port access computer or other equipment of the routing bysail is incorrect; 3. Solution: (1) Check whether the connection between the router and the Hail Optical Modem is correct; (2) Check whether the WAN port of the router is connected to the broadband access point and the password is correct; (3) Check whether the WAN port of the modem is connected to the LAN port of the router. (4) Check whether the LAN port of the router is connected to the computer or other equipment correctly; 4. Steps: (1) Connect the WAN port of the optical modem to the LAN port of the router; (2) Connect the WAN port of the router to the broadband access point; (3) Connect the LAN port of the router to a computer or other equipment; (4) Plug the power plug of the router into the power socket and turn the router on; (5) Insert the simple source plug of the modem into the power socket and turn on the modem; (6) Access the management page of the router on the computer, and set the WAN port of the router to access the broadband access point and password; (7) Visit the management page of the modem on the computer, and set the WAN port of the modem to access the LAN port of the router; (8) Access the management page of the router on the computer, and set the LAN port of the router to access the computer or other devices; 5. Personal tips:

When connecting the modem and router, carefully check the settings of each step to make sure that each step is correct to avoid problems. In addition, when setting the password of the broadband access point, make sure that the password is correct to avoid the situation of not being able to connect.

1.First, plug the power plug of the optical modem into the power socket, and then turn on the power switch according to the instructions in the manual. 2.Connect a tung network cable to the "WAN" interface of the optical modem, and connect the "WAN" interface of the router to the other end. 3.

Connect one network cable to the LAN port of the modem and the other end to the LAN port of the router. 4.If the router has wireless function, connect one network cable to the "LAN" port of the router and the other end to the wireless router. 5.According to the instructions in the manual, log in to the optical modem to control the bright wheel leakage panel, and set it up according to the corresponding steps; 6.

Log in to the router control panel and follow the steps to set it up. 7.Reconnect the router and wireless router to ensure the normal operation of the network.