How to fix ASUS computer error c0000034?

The blue screen of a computer can be caused by many reasons, and the solution is to first the software and then the hardware, that is, check the software problems first, and then check the hardware problems.

1. If the software or driver is installed before the blue screen, enter the safe mode, uninstall or delete the newly installed software and driver, and then boot it to try again.

2. If there is still a blue screen after deletion, or you can't enter the safe mode at all, then reinstall the operating system and try it.

3. If the blue screen is still blue after reinstalling the system, consider the hardware problem. First of all, clean the dust inside the computer thoroughly, remove the equipment on the memory, graphics card, and PCI slot, and test it with an eraser. Because the temperature caused by dust is too high, poor contact, etc., it will also cause a blue screen; At the same time, remove the CPU, graphics card and other fans and replace them with new heat dissipation silicone; Also, check that the temperature of all hardware is normal.

4. If it still doesn't work after cleaning the computer, then use the replacement method to check the computer hardware, if there is no replaceable hardware or not familiar with the computer, it is recommended to find a professional maintenance personnel to deal with it.

5. Hardware replacement is troubled in the following order: memory, hard disk, graphics card, motherboard, power supply, other hardware, and CPU.

6. When using the replacement method, it is best to unplug all the cables on the computer and the hardware that is not needed for booting, and only keep the power supply, motherboard, CPU, memory, graphics card, hard disk, and monitor.

7. Pay attention to check whether there is a burnt smell on the hardware and whether the capacitor on the hardware is bulging.

Tips: The replacement method to check the hardware problem is mostly used in the case that there is redundant hardware that can be replaced, and the fault point is not easy to judge directly, you need to have a certain understanding of the computer hardware, if you are not familiar with the hardware, it is not recommended to use the replacement method to check the hardware failure.

Same asus,,Last few weeks I clicked on the shutdown and update,The result seems to be updated to 15% on the shutdown,Turn on again on the c0000034 error,Prompt there are a lot of applications in the update,Later I followed the method,Long press f9,Then I selected the troubleshooter,In the click on advanced options,Then select the system restore to a certain node。 As a result, when I shut down this afternoon,Because I clicked on the shutdown and update,The result is that there is this error when you turn it on again,Then the system restore is useless,In the end, I chose to press and hold F9 to restore the computer,And then it was successful,But all the applications before myself were deleted,But the files including the C disk are still there,The computer will also save a web page to tell you which applications have been deleted。 Now the app that is being deleted is being deleted.

I think I should update and shut down the problem myself.,The laptop was shut down before the update was finished.,So I turned off windowupdate.,In order not to do it again in the future.。

So I suggest that you first select the system restore to a node to see if it works, this system restore is not formatted, the file application is still there, and then it doesn't work in the selection of the recovery system, this file is in, and your own ** application is gone. If none of the above works,I think it's better to take it to ASUS after-sales qaq I was going to make an appointment to repair the computer in the afternoon.,It finally got it.。。。

Summary. 1. Use a USB flash drive or CD to boot to the Windows installation interface, and click the lower right corner.

1. Use a USB flash drive or CD to boot to the Windows installation interface, and click the lower right corner.

1. Use the state rubber USB disk or CD to boot to the windows installation interface, click the lower right trace stupid corner 2, click 3, click 4, click 5, enter bootrec rebuildbcd enter 6, and then all the installed windows system sail will be listed in turn and ask whether to add to the startup list, if you want to add, type y, do not add type n, type a to add all at once, and close the command prompt to restart after completion.

I hope it will be helpful to you, and I look forward to liking it!

Is there a way not to use a USB disc?

If you have installed software or drivers in front of the blue screen, enter safe mode, uninstall or delete the newly installed software and drivers, and then boot the computer to try again.

How do I enter safe mode?

When the computer is booted up, when the logo interface is turned on in win10, press and hold the power button to force it to shut down; Reboot and force shutdown, repeat this operation three times to enter the interface of automatic repair;

My home computer win7

When we open or press the F8 key before entering the Windows system boot screen, there will be a multi-function boot menu, there are three versions of the safe mode to choose from, everyone will be blind friends select, enter, grind ruler Huai input, directly enter the input safe mode, as shown below:

USB flash drive 1G line?

It should be possible.

The computer boot shows error C0000034, which means that the computer has an abnormal shutdown situation during the update.

Restart the computer and press F8 to enter the "Advanced Repair Options", select the last correct configuration, and this problem can generally be solved.

Reboot and boot up, and wait for the system to repair automatically, but there is little hope for this.

If the above two methods cannot be repaired, you can choose to reinstall the system.

1. Restart the computer, and then keep pressing the F8 key when the system starts;

2. Enter the advanced repair options, use the up and down keys on the keyboard to operate, select the last correct configuration and click enter;

3. In this way, the computer can log in to the system with the last correct configuration;

4. Of course, you can also log in to the computer through the safe mode first, and you need to restart the computer first;

5. Enter the advanced repair options, use the up and down keys to operate, select the safe mode and click enter;

6. The most thorough solution, many user systems come with the system restore point function, and direct use of this function is the most thorough;

1) Press F8 immediately after booting or not booting up to press F8 without moving to the advanced option to appear in the release hand, use the up and down keys to select safe mode enter, enter the safe mode and use the software to kill the Trojan, uninstall everything installed before the accident, including the game, restore the system or reinstall the system (if you can enter the safe mode, it means that you have installed something inappropriate, uninstall all the inappropriate things before the accident, and you are hit by the Trojan, use the software to kill the Trojan, if not, restore the system or reinstall.) If you can enter normal mode, you can also do it in normal mode according to the method above).

2) If the above methods can't solve the problem, first soft and then hard, reinstall the operating system, don't install software, patches, drivers, etc., and see if there are still problems with booting? If you don't install the driver step by step, make up for Sun Ding, and roll the software, don't install it if you find something inappropriate.

Please note: If you restore the system or reinstall it, when you install the remaining drivers, patches, software, etc., be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

3) Whether there is a problem with hardware, such as hard disk, memory, graphics card, motherboard, etc., if it is caused by hardware problems, it is recommended to overhaul it.

4) If you have any questions, please ask me.

Press and hold the power button and don't move, and it will turn off after a while. Then reboot and restart, press and hold the F8 key and do not move, when the boot menu appears (Chinese characters), select the last correct configuration, and press enter to try. If it doesn't work, you restart and hold F8, the menu will appear to select safe mode, enter antivirus, 360 guard scanning, and after processing, restart to try.

If you can't get in, you can only reinstall the system.

1. Restart the computer, and then keep pressing the F8 key when the system starts;

2. Enter the advanced repair options, use the up and down keys on the keyboard to operate, select the last correct configuration and click enter;

3. In this way, the computer can log in to the system with the last correct configuration;

4. Of course, you can also log in to the computer through the safe mode first, and you need to restart the computer first;

5. Enter the advanced repair options, use the up and down keys to operate, select the safe mode and click enter;

6. The most thorough solution, many user systems come with the system restore point function, and direct use of this function is the most thorough;