Xiaomi 10 is connected to wifi disconnection, how does Xiaomi officially respond to wifi disconnecti

Updated on number 2024-03-11
11 answers
  1. Anonymous users2024-02-06

    Step1: Unplug the amplifier with flashing yellow light to make it stop working.

    Step2: Approach the main router and the phone directly.

    Connect the main router signal.

    If you connect and your phone shows that there is still no network.

    network connection, you can judge that it is the primary route with a high probability.

    The machine crashes. After the primary router is restarted, the network is connected.

    business, maybe they are in love without notice.

    The line is being overhauled.

    If the phone is connected to the main router, the signal is positive.

    Often, then please restart the router as well.

    If it is a Xiaomi router, the above restart operation.

    One might ask that the main router is positive.

    Often, why do you have to restart, go directly to reset.

  2. Anonymous users2024-02-05

    <>A small number of mobile terminals using this chip have a low probability of occasional current interruption due to a special peripheral environment when matching some versions of software, and users can solve this problem by upgrading the software of mobile terminals in the near future.

    At present,The first to be **Redmi note3Users who have this problem are about to have a solution,Xiaomi said that MediaTek has pushed a fix patch,MIUI test group will be pushed to users after testing,Confirm that it can completely solve the problem。

    If you don't understand Wi-Fi disconnection, explain:

    That is, when the mobile phone is connected to Wi-Fi and is used normally, there will be a successful Wi-Fi connection, but the Internet cannot be connected (disconnected), and the disconnection time may not be as long as a song or a movie, which is very urgent.

    The Wi-Fi disconnection problem** is found on the MediaTek MT6795 (Helio X10), a high-performance processor, and the same situation is also seen on devices equipped with the same processor, such as Meizu Metal, Meizu MX5, and LeTV 1S.

  3. Anonymous users2024-02-04

    WiFi automatic disconnection may be caused by low signal band penetration, and the solution is as follows.

    1. Unlock Xiaomi Mi 10 first

    On your phone, tap on MIUI12 to open Settings.

    2. Open the phone settings interface, find [WLAN] and tap to open.

    3. Next, the town laughs at the wireless network.

    find and click to open Advanced Settings in it.

    4. In this way, you can see [WLAN Band] in the advanced settings, click to open the option.

    5. Finally, there are three options in the WLAN frequency band selection, the default is automatic, select [Use Frequency Band Only], so that strengthening the penetration of the wireless network will alleviate the situation of dropping calls.

  4. Anonymous users2024-02-03

    <> demo model: Xiaomi Mi 11 system version: MIUI121, due to a system error, you need to restart the phone.

    2. If the firmware of the mobile phone is damaged, you can go to the after-sales service of the mobile phone for repair.

    3. The wifi setting is wrong, clean up the wifi data of the mobile phone and then re-enter the password to log in to connect.

    4. The version is not applicable, choose to flash and upgrade the system version, remember to back up the data before flashing.

    5. The deletion of the system software causes the instability of the mobile phone, and the system software is deleted, resulting in the instability of the system software.

    6. There are too many background programs, and the phone is stuck, just clean up the background.

  5. Anonymous users2024-02-02

    1.If you are using data traffic, check whether the signal strength is low in your location, and try to adjust or move to a location with higher signal strength. Turn on the airplane mode of the phone and turn it off and try again;

    2.If you are using Wi-Fi, check whether the device has any abnormalities in all Wi-Fi environments. If there are any abnormalities, it is recommended to delete the network or restart the phone to reconnect.

    1) If the network performance of different operators is different, it can basically be judged whether the wifi itself is abnormal;

    2) Due to the fact that there are many devices working in the frequency band in the current home scenario, it may cause some interference, if your router supports the 5G frequency band, you can connect to the 5G frequency band to try.

    3.If the abnormal problem of mobile phone network is serious in all network environments and regions, it is recommended to change the holding posture of the mobile phone;

    4.If you use a protective case that contains metal or is too thick, it may affect the signal reception, so you can remove the protective case and try it.

  6. Anonymous users2024-02-01

    There are two possibilities.

    1.The network signal is unstable, although the signal is full, but the wireless signal will be interfered by many factors, and the mobile phone display signal has a delay.

    2.The phone's cache is not enough, and when the cache can't accommodate the web you're browsing, the phone will automatically disconnect from the network. You need to be aware of the garbage in the cache on a regular basis.

    What's going on with the phone being disconnected all the time?

    Tools Raw materials.

    Cell phone. Method steps.

    1 3 Step by Step Reading.

    Check the speed of your own network, if it is a problem with your own network, you can restart it and change the IP address.

    Or a little closer to the wifi.

    If the mobile phone is using traffic, it is recommended not to use it in dense crowds or change to 3G for a while, and change to 4G immediately

  7. Anonymous users2024-01-31

    Always disconnected should be a fault of the module in the phone.

  8. Anonymous users2024-01-30

    WiFi or data? You can try again where the signal is stable...

  9. Anonymous users2024-01-29

    Restart it and try it.

  10. Anonymous users2024-01-28

    Mobile network problems, yes.

  11. Anonymous users2024-01-27

    Xiaomi Mi 10 is disconnected after connecting to data traffic, you can try: 1. Disconnect the mobile phone data connection directly, and then reconnect. 2. Turn on the airplane mode of your phone, and then select Off. 3. Turn off "Enable Dual 4G". 4. Update to the latest system version.

    How to solve the problem of Xiaomi Mi 10 network disconnection

    nbsp;1. It is recommended that users directly disconnect the mobile phone data connection, and then reconnect to solve the problem.

    2. It is also possible to turn on the airplane mode of the mobile phone, and then choose to turn it off, which is also more convenient.

    3. If the user turns on the dual 4G function of the Xiaomi Mi 10, there may also be a disconnection, so it is recommended that the user turn off the dual 4G function of the mobile phone. After entering the mobile phone system settings page, open the dual SIM and mobile network options, and then you can see the "Enable dual 4G" option, and change the switch point behind the option to turn off the Tong grip. Nuclear celebration.

    4. If the old mobile phone is often disconnected, it may also be caused by system problems, it is recommended that users check the system version of the mobile phone, if there is a new version, upgrade the system version.

    Operating environment

    Brand model: Xiaomi 10

    System version

Related questions
26 answers2024-03-11

Mobile phone wifi is unstable, on the one hand, it has something to do with the mobile phone, on the other hand, it has to do with yours, the wifi signal is also related, if the wifi signal is not very good, not very stable, it may also lead to unstable reception.

11 answers2024-03-11

1. Close the background program.

There are many background programs, which is the main reason for high power consumption. You can swipe up the bottom of the phone to bring up the background program and clean it up. >>>More

10 answers2024-03-11

The Xiaomi Mi 10 parameters are as follows: >>>More

9 answers2024-03-11

2. Discover the Xiaomi Mijia Smart Camera PTZ Edition, and click "Start Connection". >>>More

12 answers2024-03-11

Xiaomi Mi 10 equity version is a version of cooperation with operators,The factory contains mobile preset software,Different from the traditional custom machine,The network standard of the equity version is not restricted,It is the meaning of the contract,It is to sign a contract with the mobile,Buy the corresponding **card and tariff**,The official version is no limit,Just buy a mobile phone,The mobile phone card is your own choice,But it is the same as the network standard of the whole Netcom。