I bought a wireless router How to use it and how to set it up

First, connect the router with a computer. Set the IP to be acquired automatically, check the gateway after obtaining the IP, and turn on IE input.

IP is the gateway IP, providing the general default) Prompt account password: admin (default) according to the manual.

Enter the route, and then set the broadband link mode (generally pppoe, according to the account number) Enter the account and password, OK! Then link! Don't touch the rest!

Prompt: The link is successful, and the sister can go online.

Remember to delete the broadband login software on your computer when using the router.

After completing the above desktop, you should be able to access the Internet, and then set up the wireless network card. Also set up to automatically obtain IP....If you feel that the automatic acquisition is slow, you can manually set the IP after knowing the IP allocation range

If you are in this situation, it is very bad to buy a wireless router, because desktops do not have a wireless network card by default, and the wireless route you buy cannot be connected to your desktop, and you have to spend money to buy a wireless network card.

As for connecting the cat, there is an interface on the cat that is plugged into the ** line, and there is an interface that is connected to your computer, connect this cable to your router.

You first use your laptop to open the wireless network, open the route, use the laptop to search for the routed network, search for the future link, and then check the LAN IP of the route, which is generally available in the manual. Enter the route IP just now on the browser to enter the route, and then set it up according to the instructions to surf the Internet.

As for your desktop, buy a wireless network card to connect to your router If you don't buy it, you won't be able to use the desktop

My house is desktop + laptop + wiring by

My home is a desktop plus laptop plus wireless routing, ADSL dial-up Internet access.

The desktop does not need to be set, the notebook is set up according to the IP on the manual, and then open the wireless routing setting interface after setting, and set the dial-up Internet, wireless Internet password, router password, these things, are also according to the manual, you can. I just bought a router this week, and at first I couldn't get the network on my laptop, and then I learned that the driver didn't play.

Now I use it.,Two machines at home are connected to play CS.,I hope it can help you.。

Manual,Of course, the notebook has to have a wireless modem configuration....

Setup Steps] 1Open a web browser and type in the address bar.

Open the management page of the router and enter the management account of the router (username: admin and password: admin) in the pop-up login box.

2.Select"Setup Wizard", click"The next striker"。

3.Choose the right way to access the Internet (there are three common ways to access the Internet: PPPOE, dynamic IP address, and static IP address, please choose your Internet access method according to the description below);

PPPoE: Dial-up Internet access, stand-alone (when the router was not used before) uses the broadband connection that comes with the Windows system to dial up, and the operator gives a username and password. This is currently the most common way to access the Internet, and ADSL lines are generally the same way to access the Internet.

Dynamic IP: Before the router, the computer Li Hunger only needs to connect the line, no need to dial, no need to set the IP address, etc., can access the Internet, in the community broadband, campus network and other environments will have applications.

4.Set the wireless name and password (skip this step if it is a wired broadband router).

5.Dynamic IP: Before the router, the computer can access the Internet as long as it is connected to the line, without dialing up, without setting an IP address, etc., and it will be used in community broadband, campus network and other environments. The setup is complete.

6.After the reboot is completed, enter the management interface (, open the running state, wait for 1-2 minutes, under normal circumstances, at this time, there are specific parameters after seeing the IP address of the WAN port status, which means that the router has been connected to the Internet at this time.

1. Enter the router management address, open the IE browser on the computer desktop, clear the address bar and enter the router management IP address, and the login box will pop up after entering.

2. Log in to the management interface, enter the router management interface for the first time, in order to ensure the security of your device, you need to set the password for managing the router, please set it according to the interface prompts.

3. Start the setup wizard. Once you are in the management interface of your router, click on the Setup Wizard, and then click Next. Choose the Internet mode, most of our routers support automatic detection of the Internet mode, and you can set the Internet access mode according to the prompts on the page.

If it is another form of Internet access, please click Refer (Dynamic IP Internet Static IP Internet Access). Select PPPoE (ADSL Virtual Dialing) as the Internet access method and click Next. Enter the broadband account and password, enter the broadband account and password provided by the operator in the corresponding setting box, and make sure that the account and password are entered correctly.

4. Set the wireless parameters, the SSID is the name of the wireless network (can be set according to the actual needs), select WPA-PSK WPA2-PSK and set the PSK wireless password, click Next.

5. After the setup is completed, click Finish, and the setup wizard is complete.

A router is a device that connects various LANs and WANs on the Internet, and it will automatically select and set routes according to the situation of the channel, and send signals in the order of the best path. A router is the hub of the Internet"Traffic police"。At present, routers have been widely used in all walks of life, and various products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet.

The main difference between routing and switching is that the switch takes place at the second layer of the OSI reference model (data link layer), while the routing takes place at the third layer, which is the network layer. This difference determines that routers and switches need to use different control information in the process of moving information, so the way they achieve their respective functions is different.

2. After entering, press Enter, and the login window will pop up, as shown in the figure below.

3. The general username and password are "admin", enter after entering 4, open the "network parameters" in the pop-up window below, and then open the WAN port settings, enter your account number and password to save.

5. Open "Wireless Network Parameters", as shown in the following figure.

6. Set the wireless network account and password in the basic settings, (you can enter it as you like, just remember it) as shown below.

7. Save it after setting, then open "System Tools" and click "Restart System" to set it successfully.

You enter the IP address written in the manual in the address bar of Internet Explorer.

You can see the settings of your router!

Can you start by stating what you want to set up?

First of all, open a web page, http; Enter the settings page (most routers have this address, see the manual for details) The username and password are admin, which is the router's settings page.

And then it depends on what you want to do, and it's all explained above, and it's very detailed in the manual.

Enter the setting interface, and there will be detailed installation steps on the manual.