What is the best way to tune the speaker?

It's best when there is no noise and the sound is the clearest!

The best results of the sound adjustment are as follows:

Subwoofer 20Hz-40Hz: Powerful sound performance with proper tuning. Excessive lifting will make ** cloudy. It is mainly used to control the sound of bass drums, pipe organs and basses.

Bass band 40Hz-150Hz: This is the basic frequency band of sound, which accounts for a large proportion of the entire audio energy and is an important component of the best style. When tuned properly, the bass is moderately relaxed, and the timbre is full and soft; Under-tuning makes the sound performance quite thin, and over-elevating it will make the sound muffled and brightness reduced.

Mid-bass band 150Hz-500Hz: The human voice is in this frequency band. When the debugging is insufficient, the singing voice will be drowned out by the background**, and the voice will appear soft and weak, and it will feel strong and powerful when debugged properly.

Excessive boost can make the bass stiff and affect the clarity of the sound.

The role of sound

The speaker is the terminal of the entire audio system, and its function is to convert the audio electrical energy into the corresponding sound energy and radiate it into the space.

It is an extremely important part of the sound system, because it is responsible for the key task of converting electrical signals into acoustic signals for the human ear to listen directly, and it has to deal directly with the human sense of hearing, and the human sense of stupidity is very sensitive, and has a strong ability to distinguish the timbre of complex sounds.

Because the subjective perception of sound by the human ear is the most important criterion for evaluating the sound quality of an audio system, it can be considered that the performance of the speaker plays a key role in the playback quality of an audio system.

The sound quality of the sound is the best, there is no standard, it is a matter of self-determination. Everyone has the best in their hearts. What's more, the listening environment has a great impact on the sound effect, so the power amplifier in the audio has a tone adjustment.

There is also a double 10-band equalizer. This is necessary to meet individual listening requirements and to adapt to the environment.

If there is an optimal, tonal, equalizer is redundant. Engineers can just press the best production.

Audio adjustment, to achieve bright treble, bright midrange, and powerful bass. Able to distinguish human voices accurately. Accurate reproduction of sound field positioning. For example, the position of the first violin in the symphony orchestra, the position of the triangle sound.

This must be adjusted according to the actual situation:

First, according to the needs of the site. If there is reverberation, some do not need to wait.

The second is according to the performance of the equipment. Some audio equipment has a good treble restoration, and a poor bass part, so increase the gain of the bass frequency band.

The third is based on personal preference. Some like bright midrange, while others like heavy bass,。。

Fourth, it is adjusted according to the situation of the first material. Some** bass is too heavy, you can increase the gain of the high range...

Fifth, it balances the power of the input signal of the good name. Achieve the harmony of the various volume levels in the output.

It mainly depends on personal taste:

1. If you like the loud one, then turn up the high pitch to 90% and the low pitch to 25%.

2. If you are the kind of heavy metal who knows how to taste the original flavor and sound texture of the song, then you adjust the ratio of treble to bass to 2 to 1, that is, 80% treble and 40-45% bass. If you listen to those popular sad songs, the high pitch is 50-55%, and the bass is 15-20%, such as "Watching the Sea" and "Drifting"!

3. If you just want to listen to ** and don't care about the rest, then it's okay to tune it at will, just like it, but one thing to remember: the volume of the treble must not exceed 95%, and the maximum is generally adjusted to 90%; Because then there will be noise. And the bottom sound, it has to be no more than 65%, because if it is exceeded, there is no difference between the sound quality of the high and low sounds, and it becomes noisy or noisy.

If the bass pitch is loud for a long time, the horn will be cracked、、、 it will appear breathable, just like the feeling of a person who has lost a few teeth to speak, is not real!

So in order to achieve the effect, it is best not to adjust to the same. It mainly depends on personal taste:

1. If you like the loud one, then turn up the high pitch to 90% and the low pitch to 25%.

2. If you are the kind of heavy metal who knows how to taste the original flavor and sound texture of the song, then you adjust the ratio of treble to bass to 2 to 1, that is, 80% treble and 40-45% bass. If you listen to those popular sad songs, the high pitch is 50-55%, and the bass is 15-20%, such as "Watching the Sea" and "Drifting"!

3. If you just want to listen to ** and don't care about the rest, then it's okay to tune it at will, just like it, but one thing to remember: the volume of the treble must not exceed 95%, and the maximum is generally adjusted to 90%; Because then there will be noise. And the bottom sound, it has to be no more than 65%, because if it is exceeded, there is no difference between the sound quality of the high and low sounds, and it becomes noisy or noisy.

If the bass pitch is loud for a long time, the horn will be cracked、、、 it will appear breathable, just like the feeling of a person who has lost a few teeth to speak, is not real!

Therefore, in order to achieve the effect, it is best not to adjust to the same proportion, and it is not easy to be the largest, mainly for the sake of the life of your audio; The second is if you are an entertainment venue.

It depends on your venue and space、、、 which is usually similar to the proportions above!