How to install a fishing box, the height of the three piece set of fishing boxes

The fishing box is a relatively standardized integrated fishing equipment. The steps to install the fishing box are as follows:

1. Turret frame, aluminum alloy is not easy to rust, stainless steel is cheap, it is recommended to choose the three-screw version.

2. Forts rods, double rods are selected as double forts, and new ground plugs and fishing boxes are generally selected.

3. It is generally installed on the right side of the fishing box, which is not conducive to drawing the rod too closely.

4. The cup holder is recommended to be installed on the right rear side or the left rear side, so that irrelevant things must not be delayed to fishing.

5. In addition to the bait tray rack that can be pulled out and placed on the board, most of the bait tray racks that are directly used are suitable for installation in the left front, unless you are left-handed.

It can be changed to the rear right.

6. It is recommended to install the rear side of the umbrella frame, but to stand up the backrest and try to get in the way of it, if it is in the way, put it on the right rear side, and try to drive the umbrella frame to the highest to prevent the wind from shaking. Then the fishing box is installed, and the installed fishing box is shown in the picture.

First, the picture shows a fishing box with installed accessories, and the upper bracket is a bait box rack; In the picture below, on the left is the pole support; On the right is the fisherman's stand. My fishing box is modified with stainless steel fittings, and in the picture below I will compare and illustrate the original parts.

Second, the installation of fishing box accessories should be based on personal habits, if it is a left-handed fishing friend, then pay attention to the installation direction and ** in the installation. The narrow side of the fishing box is facing or facing the direction of the water surface, and the specific face of the water is determined according to the installation of accessories, that is to say, which narrow face to the water can be. This picture shows the bait box holder of the fishing box, mounted on the left hand in the direction of the water.

The specific left, right and up and down directions need to be adjusted according to personal usage habits after installing the bait box, the principle is to stabilize the food box, try to install the bait box shelf downward, but can not affect the rotation of the bait box.

Third, in the picture, my fishing box has been modified with stainless steel fittings, and the original plastic fittings are placed on the ground, and this shelf is used by fishermen, and it is installed on the left hand side of the person who rides the fishing box. Its mounting surface is in the shape of a corner, that is to say, the corner can be installed directly in the corner of the corresponding fishing box. When installing, it is necessary to pay attention to the position up and down, because after the installation of the fisherman, if the position of the fisherman is too high, it will affect the angler throwing the line, and it is easy to hang the hook on the fisherman, but the installation is too low, then in the fishing process, every time the fish is put into the house, you have to bend over and feel very tired, even if you use the hanging needle to pick up the hook.

It is recommended that you must consider a comprehensive approach when installing.

Fourth, the pole bracket is installed on the opposite side of the fisherman's bracket, which is also installed at the corner. Adjust it to the most suitable height according to the angler's sitting height.

You're talking about mounting accessories. Choose a good position on the fishing box according to your own habits, then use a drill to punch a hole, and then add the screws and it's OK. If you use a fishing box for the first time, it is best to find a skilled hand to help you install it, otherwise the position of each accessory is not in place, and it will be very troublesome to reinstall.

There is no specific height for the installation of the three-piece set of fishing boxes, the height of the fulcrum of the fishing rod is generally about one meter, which should be decided according to the actual situation, but the turret can not be too high when installing, it is generally installed on the lower right side of the fishing box, the fish guard is installed in the upper left corner of the left side of the fishing box, and the bait tray rack is also installed in the upper left corner of the front of the fishing box.

The turret frame is the bracket of the fishing rod, when it is installed in the position of the lower right side of the fishing box, as long as you find a good angle and then fix the four corners, it is inconvenient to draw the rod back and forth too upward, pay attention to find a flat ground when installing, and you can also use the fishing rod of the double turret.

The fish guard is installed in the lower left corner of the fishing box, and the four corners need to be fixed with screws.

The bait tray rack is in the upper left corner of the front of the fishing box, and the four corners can be fixed directly with screws after finding the angle, and the screws on the bait tray can be adjusted according to the actual height needed.

When fishing, the use of tools and the actual water conditions and fish conditions have a great relationship, in the case of competitive fishing, the rate of fishing is relatively fast, it is not recommended to use the fishing box triangle set, affecting the frequency of fishing, leisure fishing can use the fishing box three-piece set.

<> install the fishing box strap, you can insert the strap from the air, turn it over and buckle it on the middle card hole. The fishing box is a very convenient device, it can hold a lot of things, and it can also be used to sit. Usually there is a lot of preparation to be done for fishing, not only to buy fishing gear, make bait, but also to check the weather, temperature and wind direction in advance, only these conditions are right, fishing can be rewarded, otherwise no matter how high the level is a waste of time.

Abstract: The fishing box can be installed with accessories such as the turret frame and the fish guard frame to facilitate fishing, but some fishing friends feel that the fishing box is too heavy after installing the accessories, and it also affects the appearance, so they will choose not to install the accessories, in fact, they can install the accessories or not, mainly depending on the needs, if they do not install the accessories, they can directly use the fishing box as a chair and storage box. The method of installing the accessories in the fishing box is very simple, first choose the appropriate installation location, then punch holes, and then install the accessories and fix them with screws.

Let's take a look at how to install accessories in the fishing box. First, the fishing box should not be fitted with accessories.

The fishing box is a box for fishing, which can be used as a chair to sit and put a variety of fishing equipment.

Fishing box is not fitted with accessories, mainly to see their own needs, some friends feel that the fishing box is heavier after the fittings, and it is not beautiful, if you do not assemble accessories, you can directly use the fishing box as a storage box and chair; With accessories, the fishing box is more practical and more convenient for fishing.

Second, how to install accessories in the fishing box.

In order to facilitate fishing, many anglers will still choose to install accessories on the fishing box, but the installation of fishing box accessories should pay attention to the correct installation method, and the installation method of fishing box accessories is:

1. Choose the right installation location.

The first thing to do is to choose the location of the installation of the fishing box, after all, the installation of the accessories is a punch hole installation, the wrong location is more troublesome to re-install, and it will leave holes, not to eliminate the appearance of the service. In terms of the installation position of the accessories, the left and right directions mainly depend on which hand-held rod is used, and the up and down directions are adjusted according to personal habits.

2. Punching. Use an electric drill to make a hole in the screw at the selected installation position, some anglers do not have an electric drill at home, you can consider using self-tapping screws to solve, but pay attention to avoid cracking the fishing box.

3. Install the fishing box accessories.

The installation surface of the fishing box accessories is generally in the shape of a corner, and the corners are directly installed in the corresponding corners of the fishing box, and then the four corners can be fixed with screws.

3. Tips for installing fishing box accessories.

1. When installing the turret frame, be careful not to install it too closely, otherwise it is not conducive to pulling the rod back and forth.

2. Pay attention to the height of the installation of the fish guard, too high will affect the angler throwing the line, and it is easy to hang the hook on the fish guard; If the installation is too low, you will have to bend over a lot and be tired every time you release fish into the house during the fishing process.

3. There are angle adjustment screws on the bait tray rack, and the screws can be adjusted according to the high degree of suspicion.

4. When installing cup holders, food boxes and other accessories on the fishing box, pay attention to avoid affecting fishing.

1. How to install the accessories of the fishing box.

4. How to install accessories in the fishing box.

1.The installation accessories of the fishing box generally need to install the turret rod on the right side of the lower position, which is not conducive to pumping the rod.

2.It is recommended to install the cup holder on the right rear side or the left rear side, so that inconsequential things must not delay fishing.

3.In addition to the bait tray rack that can be pulled out and placed on the board, most of the bait tray racks are directly used, and it is suitable to be installed on the left front.

4.It is recommended to install the umbrella stand at the back, but you should put the backrest up to make sure that it is not in the way.

Abstract: The installation of fishing box accessories should pay attention to the installation in the correct position, the choice of installation position depends on which hand-held rod the fishing friend, most of the right-hand rod fishing friends, the turret frame is installed in the right front of the fishing box, the bait tray rack and the fish guard frame can be installed in the left front, the left hand-held rod is the opposite, the installation of other accessories is arbitrary, and it does not hinder fishing. If the fishing box accessories are installed in the wrong position, the accessories should be removed and reinstalled, and the holes left by the wrong installation can be treated with wax or glue, and then decorated with a fishing box sticker.

Let's take a look at the location of the fishing box accessories. 1. Where is the correct location for the installation of fishing box accessories?

The use of fishing boxes is inseparable from various accessories, when installing fishing box accessories, first of all, we must figure out the installation location of the fishing box accessories to avoid wrong installation. The location of the accessories for the fishing box depends on which hand-held rod you use for fishing

If the stick is left handed, the turret rack is mounted on the left front of the fishing box, and the bait tray rack and fish guard are mounted on the right front. If the rod is held in the right hand, most anglers are right-handed, the turret frame is installed in the right front of the fishing box, and the bait tray rack and fish guard are installed in the left front.

In addition, there are some other accessories installed, which are mainly based on not hindering fishing, such as the rear side of the umbrella frame, which is a little higher to prevent the wind from shaking, and the cup holder is recommended to be installed on the right rear side or the left rear side.

Second, what should I do if the fishing box accessories are installed and the beam is missing.

When installing the fishing box accessories, sometimes it is inevitable to find that it is inconvenient to use after installation, and the situation is wrong, so how to deal with the wrong fishing box accessories?

When installing the fishing box accessories, first of all, we must consider the correct position of the installation, and then install it after confirmation, because the installation of the fishing box accessories is a punch hole installation, and the wrong installation will not only be removed again, but also leave holes, which is very unsightly.

If the installation is still wrong after thinking about it, the solution is also very simple, first remove the accessories installed in the wrong position and reinstall them in the correct position; As for the screw holes left on the fishing box, you can seal it with wax or glue, and then press it with a hot iron sheet, if you feel that it is not beautiful, you can use some stickers to stick it, there are special fishing box stickers can be purchased, and it is more beautiful to paste on.