Win7 how to register CAD2008

CAD2008 installation methodCAD2008 installation method.

3. Copy all the files in the CD2 file and paste them into the CD1 folder.

4. Start the installation below.

Click on the icon file in the CD1 folder to start the installation.

If you click "Not can be installed, an error is displayed, it is estimated that your PC operating system does not have Microsoft installed.".NET Framework, first go here and install Microsoft.NET Framework, and then click "Install."

I couldn't install it at first, and it took a lot of effort to figure out the reason.

Afterwards, I found out that the correct installation method was to click "Install, I'm the point" to install it, but in the end it was also installed. ）

5. Click "Install Product".

Next, next, next, I don't need to say, there is no need to install it here, you need to activate CAD2008 below.

6. Find the root directory you just installed.

Click on the icon file 'Run CAD2008.' (Be sure to run CAD2008 first, otherwise the following keygen will not open).

7. The "Activate" page appears.

Prompt for a "Serial Number" and "Activation Code". Tips, when copying and pasting the following "application number" and "activation code", you need to use the shortcut keys "Ctrl+C" and "Ctrl+V", and I can't copy and paste with the right mouse button here.

1) Start by looking for the serial number.

Find the "folder" in the original unzipped file CD1, open the notepad file inside, there are the required serial numbers in it, a total of three, just use one at will.

2) Then look for the activation code.

Open Keygen Files in Folder.

Then enter the "Application Number" on the "Activation" page in the Keygen to get the corresponding activation code. (Some activation codes may be invalid, then click "caculate" to continue getting the activation code).

8. Then enter the corresponding "Serial Number" and "Activation Code" in the "Activation" page (copy and paste with shortcut keys "Ctrl+C" and "Ctrl+V"), and then click "Next".

9. Activation successful.

10. Finally, run CAD2008 and install it successfully.

11. If you start CAD2008, "Unable to load configuration file" appears. Some configuration information saved in the last task may not be recoverable. dialog box.

Or in the process of using it (such as switching to the 3D Modeling workspace), "Unable to load tool directory. The required modules are not properly registered. dialog box.

The workaround is: reinstall the program (path: autocad2008 support msxml.

I hope this can save you some time, don't take detours, saving time is to prolong life, it seems that I am wasting my life, in order to write this, and delayed me a lot of time, ha, not to say, this is the first article I learned CAD, learn to install, start from scratch, and learn again.

The keygen must be opened with CAD running.

1. Create a temporary directory, such as cad2008

3. Change the zh-cn folder in the CAD2008 folder to en-us;

md5:c5c0e122d33d672cfa1863f963ffa616

Extract the 64-bit patch and replace the two files in the original folder;

5. In the Start menu, set UAC to Never Notify, or in Start-Control Panel-User Account and Family Safety-User Account-Change User Account Control Settings--- pull that from default to Never Notify, restart (if UAC is turned off, you can ignore this step).

6. Execute the CAD2008 directory to start the installation. Screenshot of re-enabling UAC (User Account Control) after the installation is complete

I can attach it.

Resolution. 2. Click the "setup" icon to start the installation.

3. In the pop-up dialog box, select "Install Product".

4. Click Next as required, select the installation path, select "Chinese Simplified", and click Install until completed.

5. After the installation is completed, open Auto CAD2008 from the start options, and the registration dialog box will pop up, you can choose "Trial" or choose to "Register" only with the keygen.

Can be installed.

2. Click the "setup" icon to start the installation.

3. In the pop-up dialog box, select "Install Product".

4. Click Next as required, select the installation path, select "Chinese Simplified", and click Install until completed.

5. After the installation is completed, open Auto CAD2008 from the start options, and the registration dialog box will pop up, you can choose "Trial" or choose to "Register" only with the keygen.

Yes, it can be installed. Be patient...

Absolutely.

Whether the installation is successful or not depends on whether your CAD is completely cracked.

First of all, choose the version corresponding to the computer system, such as the computer system is 32 bits, choose the 32-bit CAD2010 version, and choose the 64-bit version for 64 bits.

1 Installation. Extract the installation package to the specified folder first, run the installer directly on the W7 system, and then install it according to the prompts; The installation path is the default C disk, or you can choose to install it on other disks such as D disk or E disk.

2 Activation. Extract the keygen to the specified folder first, and then run the program to after the program is installed"I have the activation code interface", run the keygen as an administrator and calculate the activation code according to the steps in the figure, copy the activation code into the activation code box of the program interface, and complete the activation.

3. The software installation is complete.

It is recommended to install the AutodeskCAD2012 version of Pass to you.

AutoCAD 2008 is a demarcation point for AutoCAD support for 32 64-bit operating systems, Autodesk only offers the English version of the 32 64-bit installation CD, and only 32-bit installers in other languages.

At present, when installing a new 64-bit operating system, you will encounter a problem that cannot be installed when installing AutoCAD 2008 Chinese version, and Autodesk does not provide a solution. So if you're a big fan of AutoCAD 2008, here are a few options:

1. Uninstall the 64-bit operating system, install the 32-bit version of the operating system, and you can install AutoCAD 2008 Chinese version;

2. If you don't care about using the English interface, you can install AutoCAD 2008 64-bit English version on your 64-bit operating system;

4. In addition, someone on the network provides a possible solution for installing AutoCAD 2008 Chinese version on the 64-bit operating system, some netizens reflect that the installation is successful, and some netizens report that there are problems with the installation using this method, but I do not guarantee its availability, only for testing, the method is as follows:

a. Create a temporary directory, such as CAD2008;

b. Copy all documents in CD1 and CD2 to CAD2008 directory;

Note: Autodesk official AutoCAD 2008 Chinese version is a dual CD

md5:9a6be59ad3c8fde74898511e8099ebed

md5:c5c0e122d33d672cfa1863f963ffa616

d. Change the name of the zh-cn directory in the CAD2008 directory to en-us;

e. Execute the CAD2008 directory to start the installation.

The AutoCAD 2008 64-bit Chinese version claimed on the Internet*** probably uses this method to process and repackage the original double CD.

Hope it helps.

At least not yet. Change the system put. Mine is the same, ready to change.

You can install it if you change the W7 flagship version.,Or there's no way to solve it.。

The 2010 version has 32-bit and 64-bit versions.