What are the main reasons why printers often jam?

Reasons for printer jams:1. Inferior paper or paper is damp. Inferior paper often has a lot of paper scraps attached to it, and the paper scraps fall into the machine during the printing process, which puts pressure on the paper roller and increases the possibility of paper jams.

If the paper is too light, it is also easy to jam. In addition, if the paper is wet, it will get wet, and the paper will be prone to jams.

2. There is a problem with the software configuration. Paper jams can also occur due to incorrect software settings. For example, if a paper drawer is filled with a different size of paper, but the A4 size paper is still set in the software settings, a paper jam will occur.

3. Aging of spare parts. If a printer is more than a year and a half old, its spare parts will begin to deteriorate, especially the wear of the paper roller, paper roller and separating jaw, which is also the main cause of paper jams.

Reasons for paper jams:

If the paper is often jammed, it is possible that the paper roller cannot be fed or is stuck under the toner cartridge: it may be a laser, or there may be a problem with the fixing module, and the fixing film inside is broken and needs to be replaced. Workaround:

Paper tray jam: Pull the paper tray out of the printer, pull out the damaged paper from the paper tray, and then put the paper away to see if the paper is wet, if so, you need to change the paper.

Paper jam in the middle of the printer: First see if the paper can be seen in the paper feed area, and if you can, slowly pull the paper down and out of the printer. If you can't see the paper, open the top cover area to find the paper.

Note: If you can't move the paper easily after finding it, don't force it out and move the roller slowly to pull it out) If the paper is attached to the tray, try pulling it out through the top of the tray or from the top cover area.

Paper jam in the output area: If the paper is stuck in the top output area, but most of the paper is still in the printer, it is best to remove the paper through the rear windshield. This allows it to be pulled out of the rear windshield along the rollers.

Double-sided device jam: first open the double-sided cover and pull it to see if you can't pull out the paper, if you can't, take out the ink cartridge first and you can easily take out the paper.

1.It's possible. It means that you didn't put the paper well, don't stuff the paper too much, just put it just right. It is easy to get stuck again after the printer has jammed the paper, so be careful when putting the paper.

2.In general, problems such as paper jams can be thought of as being inside the printer"Rollers"Faults. If it is serious, it will be found in time and repaired in time. If there is a frequent jam, you need to find a relevant professional to disassemble the machine to check whether the internal components are damaged.

There are many reasons for paper jams. From the aspect of paper: one is the innate that the quality of paper is indeed poor. Second, the reason for the day after tomorrow is that the late paper is damp due to opening, and 2 is improper use. Also, even the machine often has problems! It's up to you to decide on a case-by-case basis.

As long as the paper of average quality is used correctly in the normal machine, there will be no paper jams!

Printer jam is generally a roller type chain paper, which is also a technical problem in the printer industry, there will be paper jams, but if the printing volume is not large, the frequency of the paper jam is mostly hardware needs to be adjusted, if the printing volume is large, but the paper jam is only 2-3 times a day is a normal phenomenon. To minimize paper jams, the paper should be placed artificially, parallel to the direction of the printer's paper feed, and the position of the paper should not be lower than the printer. Tear the paper to minimize uneven tearing.

If the paper is jammed frequently, it means that the speed of the chain feed cart motor and the roller is unbalanced. Lubrication is required.

1 The paper is damp (stop using it and dry it properly before using it) 2 The paper is piled up for too long (shake it to facilitate paper feeding) 3 The paper is too thin (switch to paper).

4 The feed wheel is worn.

5 There are impurities or dust inside the printer (cleaning and maintenance).

There are many reasons for this: What brand of printer do you have, is it inkjet or laser?

2: Stuck under the toner cartridge: It may be a laser, or there may be a problem with the fixing component, and the fixing film inside is broken and needs to be replaced.

3: Stuck in the place where it appears: It is obvious that the fixer film is ruptured and needs to be replaced.

It may be that the static electricity is too large, resulting in paper; It may also be caused by excessive wear and tear of the paper roller for a long time. It is recommended to contact customer service and replace the paper wheel, and the effect should be obvious.

Ten reasons why a printer jams.

1. Wet, curled, wrinkled or cracked paper will cause paper jams.

2. Excessive placement of paper in the paper feed slot.

3. There are debris in the paper output path.

4. The paper roller is worn or the spring is loose, and the pressure is not enough, that is, the paper cannot be fed into the machine.

5. Paper that is too light in quality is also easy to cause paper jams.

6. The separation jaw of the paper outlet is damaged, resulting in the inability to feed the paper normally.

7. The printer tray is installed incorrectly.

8. The paper rubbing caused by the wear of the paper roller is abnormal.

9. The sensor failure cannot work normally.

10. Slippage of the drive clutch, gear and shaft will make the paper transmission abnormal, resulting in paper jams.

For enterprise office, OA equipment such as printers are irreplaceable office equipment, and they are required to complete the printing of office documents. Although the printer can help us complete the printing and copying of documents, it will sometimes have a little "little temper" from time to time, although it is annoying, but there is nothing to do with it.

Although the development of printing equipment has long been more mature, and various manufacturers have optimized for paper jams, sometimes accidents still occur, some problems are in the printer, and some problems are in the printing paper and other reasons.

1. First turn off the power, so as to avoid the defeat of the paper in the process of taking the paper, and the sudden operation of the printer, resulting in accidents; 2. Open the front cover of the printer (according to the actual situation), and then take out the toner cartridge and toner cartridge;

3. Then wave the gear according to the direction of the paper output, and take out the printing paper of the card owner (generally take out the direction of the paper output, so as to avoid damage to the gear of the sensor); 4. After taking out the paper, return each component to its place, then close the front cover, and finally turn on the power to continue to use.

A few tips will reduce the chance of paper jams:

1. Do not use paper and non-standard paper that are too poor in quality;

2. It is not recommended to use paper with wrinkles;

3. The paper should be neatly arranged before use;

4. The paper fixing plate should not be fixed too loosely or too tightly;

5. Do not place small items such as rubber grip and paper clip near the printer to avoid being sucked into the printer and causing damage to the equipment.

First, the problem of paper warehouse.

The paper deck of most printers can be adjusted, especially some large multi-function printers, when many users use the printer, the paper put in is different from the last time they were used, and the size of the paper bin is not adjusted, which will cause the printer to print and feed the paper, the paper will be displaced because of the lack of fixed paper deck, and finally the paper jam. After adjusting the paper deck to the appropriate size, the paper will be relatively stable and uniform when the printer prints and feeds the paper, and there will be no paper jams.

Second, the paper problem.

Although most of the printing paper is relatively flat, but some printing paper paper is of poor quality, when the user uses the printer to print, the paper will form folds, and there is a paper jam, but it is not excluded that the paper itself has wrinkles, because the user lacks understanding of the printer, and thinks that the folded paper can be used if it is flat, in fact, this is the wrong approach, and many printer paper jam problems are caused by the user putting unqualified printing paper into the print. In this case, take out all the printer paper directly, and then put a few sheets in first, print it and try to do it, don't put the printer paper with wrinkles.

3. Foreign objects in the feeder.

During the normal printing process of the printer, the printer will convey the printing paper in the paper bin to the marking source guessing workbench through the paper feeder, and this is completed by multiple gear rollers inside. Limited by the different brands, models, and structures of the printer, the style and structure of the feeder are also different, but they are all similar, such as the feeder cannot work properly, there are foreign objects on the roller, or the working action of multiple rollers is inconsistent, etc., which will cause the printer to jam.

In this case, you can simply check the feeder to see if there are foreign objects, if there is a direct clean up, if not, observe whether they are working normally, if not, it is best to find after-sales maintenance, do not get it yourself, maintenance does not cost a few dollars, but if you get it yourself, it is easy to cause secondary damage, even if you get it, there will be frequent paper jams in the future.

Fourth, out of the paper stick.

This kind of failure is not common, limited by the brand and model of the printer, etc., the structure of some printers is more special, when the printing paper enters the printing table, in addition to the paper feeder to send the paper to the printing table, there must be a device similar to the paper dispenser (paper stick), the device is generally pulled by a gear or belt, and the printing speed of the paper feeder and the printer is synchronized, if there is a situation of non-synchronization, the paper will be jammed. In this case, you need to remove the shell of the printer, and then carry out the printing test, ** the way and part of the printer jam, to further determine the problem, you need a certain professional Kai type technology, and you can directly find after-sales inspection and maintenance.

Conclusion: There are many reasons for the printer to jam, if it is stuck when feeding the paper, it is a problem with the feeder, if it is stuck during the printing process, it is caused by foreign objects or functional failures inside, if it is stuck when the paper is out, it is the problem of the paper stick at the crack place, according to this, combined with the quality of the paper, you can judge the cause of the failure.