What brand of domestic injection molding machine has the best quality

General injection molding machine, Shuangsheng injection molding machine, Haitian, are not bad. 133,610,55200 general servo energy-saving injection molding machine series models are equipped with high-performance servo variable speed power control system, and equipped with rotary encoder and power sensor respectively to feedback the flow and pressure, high-performance synchronous servo motor by changing the speed and torque to make the corresponding flow pressure adjustment, the pressure flow for accurate closed-loop control, to achieve the best matching and automatic adjustment of the servo motor to the energy demand of the injection molding machine. Precise speed and pressure control has been realized (closed-loop servo control of mold locking, injection and ejection greatly improves the response speed, and the repeatability accuracy is within 1%; The pressure holding action is continuously tested for 10 seconds, and the pressure error does not exceed 10kg).

Compared with the traditional injection molding machine, the repeatability is better, the response speed is faster, the energy-saving effect is more obvious, and the power can be saved by 20%-80%, and the effect is more significant for products with long holding time and back wall and high precision. The economic benefits are obvious. The servo motor control system with fast response and stable performance is equipped with a high-precision and high-sensitivity pressure feedback device to form a closed-loop pressure precision control, which can provide customers with good product stability.

The servo energy-saving injection molding machine only needs to achieve the maximum output, and the response speed is significantly faster than that of the traditional injection molding machine, which effectively shortens the cycle time and improves production efficiency. In addition, the reduction of the heating capacity of the machine can further reduce the hydraulic oil temperature, which can reduce the amount of cooling water by about 30%, reduce the noise around the machine, strengthen the stability of the machine, increase the service life of the hydraulic oil and seals, and greatly reduce the cost of machine use and maintenance, and also meet the current international strict environmental protection requirements.

The products are widely used in a wide range of industries: daily necessities, toys, electrical accessories, mechanical parts, textiles, auto parts, chemicals, medical equipment, construction, electronic accessories and other industries.

There are too many domestic injection molding machine brands, it is difficult to tell which one is the best, the oldest brand Haitian, the quality is excellent, followed by Ramada, Haitai and other quality can also be, and the user response service is good.

In fact, there is no best, see what suits you best!

Haitian, some brands of Chen Hsong are standard machines, the company is large, the technology has not improved, and no one in a large company is willing to take responsibility. After a long time, it still can't be drawn. Peers saw that Zhenhua machines were being used, and the brand was not very famous, and the output was much faster than that of big-name machines.

The core motor drive and oil pump are all imported big brands, and the machine thinking of big brands has been limited after a long time. Tried to buy one and haven't been disappointed yet. Every industry is the same, if you don't make progress, you will be eliminated.

I have used Haitian, Chen Hsong, Borche, Garmin, Datong brand injection molding machines, and I am familiar with these manufacturers:

1. Datong injection molding machine: the machine configuration is generally higher than that of its peers, and the machine is especially suitable for acrylic products. The things that the computer uses are Taiwan Allied Power and Japanese Star, which are more professional.

Datong technology is also relatively mature, general purpose machine and special machine are doing well, ** may be more expensive!

2. Haitian: big brand, quality can be, service is in the form of **, the charge is very high, there is no patience with old customers for a long time, and customers are always persuaded to buy new machines, which have strong interests!

3. Chen Hsong: The declining aristocracy, the machine does not have much progress, the localization of parts is serious, and it is relatively cheap.

4 Borche: The marketing team separated from Chen Hsong has done a good job in marketing strategy, but it is often exaggerated.

5 Jia Ming: What is good rigidity, that thing can be eaten as a meal, if you want rigidity, you can buy solid iron directly, buy injection molding machine or pay attention to hydraulic and electrical configuration, especially hydraulic components, pumps, valves and other key things. If you don't care about the quality, you can buy Ningbo's miscellaneous brands directly, a lot!

I recommend: buy Haitian when you buy a brand, buy Datong injection molding machine if you buy quality, and buy a miscellaneous machine in Ningbo if you buy cheap.

Brands really need to choose carefully, injection molding machine detachable flexible heat shield Fei Pufu energy-saving and environmentally friendly reuse.

Generally, foreign brands of injection molding machines are better, and they are more expensive than domestic machines (but you can buy second-hand phones). Nowadays, electric motors are generally used, and hydraulic presses can also be used (cheap). Personally, I think the electric motor is better, there are Toyo, Toshiba, and Nissei.

Domestic general Haitian, Chen Hsong, Yizumi.

Brand machines are like Haitian Zhenxiong.

The above models are all around 300,000.

Cooling tower shredders.

Count 10,000.

The remaining ratio is almost 11-120,000 to buy 160t

7-80,000 buys.

120t such a budget.

It is only possible to buy an assembly machine. The kind of one-time payment.

The new machine is similar, but the failure rate is getting higher and higher over time.

It also depends on the product, how high the requirements are for the machine.

Generally low-priced.

Ningbo machines are.

Procter & Gamble or Samsung or MegaChase

It's all easier to understand and easy to get started.

Good start.

Hongxun Fuji this kind.

Actually, it's not that hard.

If you need a machine, you can contact me.

You can choose Haitian, Garmin, Shenzhen Jianda, etc., but the ** sales are higher. 200,000 can only choose a second mobile phone, and you can hardly buy two new phones.

We do a lot of things in architecture here, Hebei, Haida here, and Haitian, it seems that Haida's is cheaper than Haitian

I have used Zhenxiong, Haitian, LK, Haida, Shenda, these brands of injection molding machines are OK!

The quality of the brand is a personal opinion. Buying the so-called famous brand, one is to show off, and the other is to retreat. The boss loves to show off, suffers from sin, and is slammed after-sales; Managers recommending mainstream brands can evade responsibility and have excuses for not being able to do products; Recommend non-mainstream brands, and take the blame when something goes wrong.

As a result, following the trend one by one, it became a giant equipment factory, lost the pockets of buyers, fattened the so-called executives who were good at mixing scenes, and indirectly became victims of monopoly without knowing it. Send him three words: hahaha.

Ningbo Lisong's injection molding machine is still good, you can consider it.

Guangdong (Jinxin) screw factory quality is strong.

Our company has been using Guangdong Shunde Liansheng injection molding machine, OK,

Now all-electric motor is the direction of the development of injection molding machine, with advantages: precise control, energy saving, low pollution, and low operation requirements.

Japanese: Toshiba, Mitsubishi,..

Europe and the United States: Demag, Zhafir,..

The domestic sea and sky are in general... Engel's good!

What do you care about? What kind of machine do you need for your product?

The so-called good, nothing more than **, service, quality, financing conditions, or comprehensive good, if the product is almost no requirements, **sensitive, and nothing more than service and financing, buy miscellaneous machine if the product is almost no requirements, **not sensitive, buy brand machine if the product is almost no requirements, **not sensitive, care about financing conditions, buy financing conditions are good, if the product has requirements, buy can meet your product requirements, **and other convenience, followed by if the product has requirements, several can meet your requirements,** If the product has requirements, several can meet the requirements, ** and almost, the brand has about the same, buy good after-sales service.

If the product has requirements, several can meet the requirements, ** is almost the same, the brand is similar, the service can also meet the requirements, buy what you feel comfortable to talk about.

Whether it is Haitian, Zhenxiong, Lijin, or Haida, starfish, and seahorse are right for you.

It is recommended to go to a professional second-hand equipment platform to understand the comparison, which is more intuitive. There are many brands, take a look at the more popular models discussed, and then weigh what suits you.

The domestic injection molding machine brands are:

Haitian, Zhenxiong, Zhende, Yizumi, Donghua, Huada, Hairi, Haida, Haiying, Yongjiang, Haibao, Xinxie, Cost, Ningsu, Kaidiwei, Enge, LK, Haixiong, Glen, Jiaming, Borche, Haixing, Haitai, HNA Baojie, Haitong, Yonghua, Hongli, Liansheng, Sanshun, Jinxing, Hengrun, Shenda, Shuangma, Bole, Hongda, AGCO, Hongqiao, Liguang, Zhongtai Seiji, Liguang, Hongli, Yongjiang Factory, Tejia, Jianda, Liyuan, Apollo, Jiwei, Hairun, Shiyao, Yongtai, Energy, Lima, Hongtian, Liusu, Guangsu, Rongsheng, Daming.

Taiwan, China. Chen Hsong, Baisu, Liansu, Taichung Precision Machinery, Full Force, FCS, Chaoqun, Qunji, Huarong, TMC, Lianfa Precision Machinery, Yasu, Fengtie, Jinji, Nanrong, Congwei, Yizhan, Shunzhan, Huaqin, Formosa Plastics, Yinai.

Hong Kong, China. Chen Hsong, Hang Seng, Renxing, Yilida, Baoyuan, Yiguang, Quansheng, Auckland, Yeqin, Baterin.

Japan's Fanuc, Sumitomo, Toyo, Toshiba, Nippon Steel, Nissei, Sodick, Naki, Ube, Kawaguchi, Mitsubishi, Niigata, Hishiya, Kawagang.

South Korean ls Woojin Hyundai Dongshin.

American boy Cincinnati remusig husky baston babyplast

Germany Battenfeld, Krosma, Fedema, Gemiracron, Arburg.

New Dedo, Italy.

Swiss Nessset.

Engel, Austria.

Let me be fair, engaged in the injection molding industry for more than ten years, many injection molding machine brands have been used, several leading enterprises in the industry machine quality and service gap is not big, now some brands may not be known to you, but the machine quality and service are done well, now the injection molding machine manufacturing is not too high-tech, the domestic industry has been more than 60 years, there is no lack of technology, the lack of product positioning and service awareness. I have used a brand called Youzhu injection molding machine, and I feel that it is very thick, and I can see that I am making products with heart, which is what I value the most.

"Dream of Red Mansions" book shadow"Dream of Red Mansions" book shadow.

You can try to buy a pressure injection molding machine, the machine is stable, and the price is very high. **Also offered.

Ningbo Yisu injection molding machine is relatively good, and now the injection molding machine has increased the output by 30% in Haitian's production capacity, and the effect of energy saving and environmental protection is also very good, which is a very good brand.

HNA injection molding machines are the most rubbish, and design engineers eat.

Domestic injection molding machines are mainly in Ningbo, and there are several good brands, like.

General plastic machine, Shuangsheng plastic machine, etc., really use no worse than Haitian, Haitian, the brand is hard, and the service is average.

We have only used Yizumi's injection molding machines for these three brands, and I feel okay. **It's about the same, it's more cost-effective. But my friend is also good at using Haitian, you can look at Yizumi and Haitian.

The brands of injection molding machines are Haitian, Yizumi, Borche, LK, Garmin, and Tederique.

1) Haitian brand, the quality can be, the service is in the form of **, the charge is very high, the time is not patient with the old customers, always persuade customers to buy new machines, there is a strong sense of interest.

2) The aristocracy of the decline of Chen Hsong, the machine has not been greatly improved, and the parts are seriously localized, and ** will be cheaper.

3) Yizumi's development in recent years is okay. The computer is Taiwan Alliance and Japan Star. Yizumi's technology is also very mature, and both general-purpose and special machines are doing well, but there is no innovation in the machine.

4) Borche: The marketing team separated from Zhende has done a good job in marketing strategy, but it is often exaggerated.

5) Strength: I heard that the internal management is relatively chaotic, and the maintenance is often replaced, so I put most of my energy on the die-casting machine, and I don't invest enough energy in the injection molding machine;

6) Jia Ming: I always boast that the rigidity is good, that thing can be eaten as a meal, if you want rigidity, you can buy solid iron directly, and you still need to pay attention to the hydraulic and electrical configuration when buying an injection molding machine, especially the key things such as hydraulic components, pumps, valves, etc. If you don't care about the quality, you can buy Ningbo's miscellaneous machines directly, a lot of them, and the thieves are ......

7) Tederic injection molding machine: the injection molding machine produced is relatively rough, the details are not very good, the visible place uses good brand accessories, and the invisible place uses a lot of materials. Among the users who have high requirements for the injection molding process, the reputation is not very good, and the customer churn rate is relatively large, especially the high-speed injection molding machine requires the machine to be strong, and the Tederic injection molding machine is relatively thin, so the customers of the high-speed injection molding machine are almost lost, such as the industry that produces disposable fast food boxes.

Tederic often finds reasons to deduct the payment of ** merchants, so it has changed a lot of ** merchants, and the overall reputation of ** merchants is not very good.

Haitian is better, China is a famous brand, Ningbo. I used to work with injection molding machines. I have been making molds for more than ten years. However, Haitian's ** is expensive now, if you want to be practical, why not consider other brands that can still be used.

The domestic ones can choose Yizumi and Haitian, which are both old brands, and the quality of the injection molding machine is very good. Foreign countries can choose Japan's Mitsubishi and Toshiba How to say it, support domestic production, in fact, these brands are good. Our factory uses Yizumi, and it has been used for three years and has not been repaired.

Hello, at present, the domestic Haitian, Yizumi, and Donghua in the industry are relatively good, but each manufacturer has its own advantageous products, so you can learn more about each one.

In China, there are Haitian Plastics Machinery, Borche, Yizumi, Haida Plastics Machinery, Donghua, Tederic Machinery, Zhejiang Plastics Machinery General Factory, Zhejiang Shenda, Shuangma, Ningbo General Plastics Machinery, Haixiong Plastics Machinery, Chuangji, Golden Eagle Plastics Machinery, Haixing, Taiwan Yasu, Haiying, Haida, Haijing, Haihua, Haibao, Haitong, Donghua, etc.

In the mainland market, Ningbo machinery occupies 60% of the country. At present, among the foreign brand machines in use, the Japanese machine has the highest usage rate, followed by the European machine, and the proportion of both has reached more than 40%.

The well-known domestic high-speed injection molding machine brands include Dekuma, Guangdong Chunchun Donghua, Guangdong Liansheng, Dounai Bochuang, Yizumi, Chen Hsong, Ningbo Haitian, and LK.

The injection molding machine is an all-electric motor, and the usual injection molding machine is a hydraulic injection molding machine, and the hydraulic injection molding machine is relatively slow to run at a slower speed. At present, the servo motor used in the all-electric injection molding machine realizes the opening and closing of the mold, the ejection and demolding, and the injection and storage of raw materials. And so on, the operation speed is fast and precise, which greatly improves or improves the production environment and production efficiency.

However, servo-electric injection molding machines are currently only available with clamping forces of up to 850 tons.

Injection molding machines have the ability to form complex shape, precise size or dense plastic products with metal inserts at one time, which are widely used in national defense, electromechanical, automobile, transportation, building materials, packaging, agriculture, culture, education and health and people's daily life.

Injection molding machines are also known as injection molding machines or injection machines. It is the main molding equipment for making thermoplastics or thermosets into plastic products of various shapes using plastic molding molds. It is divided into vertical, horizontal, and all-electric type.

The injection molding machine heats the plastic and applies high pressure to the molten plastic, causing it to be injected and fill the mold cavity.