Is No. 120 solvent oil a hazardous chemical?

Updated on society 2024-03-21
14 answers
  1. Anonymous users2024-02-07

    Solvent oil is mainly used in the rubber industry, footwear industry, comprehensive utilization of reclaimed rubber, and modulation of various adhesives. This product is a colorless transparent liquid, flammable, volatile, does not contain tetraethyl lead, has low sulfur content, and is a widely used organic solvent. No. 120 Solvent Oil 120 Solvent Oil, also known as Rubber Solvent Oil Also known as Industrial Heptane, commonly known as white electric oil, white alcohol, collected at 80-120 degrees Main Ingredients:

    N-heptane, isoheptane, cycloheptane Main impurities: aromatics, sulfur, nitrogen and other compounds First, the nature of the product is made of high-quality light hydrocarbons in the oilfield as raw materials, produced by continuous distillation process, and its main components are n-heptane, isoheptane and cycloheptane, and also contains a small amount of octane and hexane, which is liquid at room temperature and pressure, flammable and volatile. 6. Solvent oil is a colorless transparent liquid, volatile and flammable liquid, a mixture of hydrocarbons, and a variety of different hydrocarbon solvents containing aliphatic hydrocarbons, aromatic hydrocarbons and cyclic hydrocarbons with different components.

    Melting point—. Boiling point. It is flammable, low toxicity, soluble in benzene, chloride, acetone, carbon tetrachloride and other organic soluble, but insoluble in water.

    Quality standard: Appearance: colorless, transparent, no suspended precipitate, relative density, chromaticity (PT-CO) No. 30, flash point 20, aniline point 145, aromatic hydrocarbons, % 3, boiling range (initial boiling point, final boiling point, no evaporation residue, no corrosive to metal. It is one of the basic organic chemical raw materials, which can be used as a cleaning agent to clean electronic parts, and can also be used as a metal degreasing and decontamination cleaning agent, which is widely used in printing, hardware, electronics, glue, rubber, national defense industry, paint, chemical, grease and other industries. If you use it as an all-purpose adhesive, it will be better to use 6, 6 is cheaper than 120 **, and volatilization is much faster, but it is recommended to use 120 for electrical tape

  2. Anonymous users2024-02-06

    Yes, No. 120 white oil is a dangerous good, it can be lit!

  3. Anonymous users2024-02-05

    Solvent oils are classified as dangerous goods. It belongs to the third class of flammable liquids in dangerous goods. Solvent oil is widely used in paints and is the main cause of flammability of paints.

    Solvent oil itself has strong flammability, and it is highly flammable and highly flammable. It is a flammable liquid dangerous goods.

    Solvent oil as flammable dangerous goods, transportation and storage are not casually able to carry out, must have the corresponding dangerous goods transport qualification certificate, but also have a special dangerous goods land-based transport vehicle, only with the qualification certificate and special vehicle transport company can operate. During transportation, the transport vehicle should be equipped with the corresponding variety and quantity of fire-fighting equipment and leakage emergency treatment equipment. The tank (tank) truck used in transportation should have a grounding chain, and a hole partition can be set in the tank to reduce static electricity.

    It is strictly forbidden to mix with oxidants, edible chemicals, etc. During transportation, it should be protected from exposure to sun, rain and high temperature.

  4. Anonymous users2024-02-04

    My <> am glad to answer for you It is not dangerous goods, solvent oil No. 1500 is a clean oil for industrial use, because it has no flammable, explosive, toxic, harmful, corrosive and other characteristics, it does not belong to dangerous goods. According to the Regulations on the Classification, Labeling and Packaging of Hazardous Chemicals (GB 13690-2009), solvent oil No. 1500 is not a dangerous chemical and is not a dangerous goods. According to the Regulations on the Classification, Labeling and Packaging of Hazardous Chemicals (GB 13690-2009), solvent oil No. 1500 is not a hazardous chemical and does not belong to dangerous goods.

    In order to ensure safety, it should still be effectively managed and controlled to avoid improper operation of Solvent Oil No. 1500 to bring harm to themselves and the environment. [Fresh hall bent flowers].

  5. Anonymous users2024-02-03

    Vegetable oil fuel is a green and safe fuel, which is prepared from common chemical products as raw materials. Vegetable oil fuel is safer compared to other fuels. In practical application, vegetable oil fuel will not be polluted by waste gas, wastewater and other industrial production wastes, and the oxygen content of vegetable oil fuel is high.

    The combustion is sufficient, the vegetable oil fuel is clean, there is no black smoke from the exhaust pipe, and the bottom pot is not easy to blacken. Vegetable oil fuel does not have any residue, it can not only replace petroleum liquefied gas for household use, but also can replace diesel for canteens in hotels, heating, processing and other enterprise units, and can also be used for other industrial production purposes, such as industrial kilns, heating furnaces, etc. Vegetable oil fuel has been greatly improved in terms of heat generation and combustion point temperature.

    The heating zone of vegetable oil fuel is controllable, the calorific value is about 10,000 kcal kg, and the strong operation ability ensures the availability and use cost of production operations. Its flame temperature can exceed 1450 degrees, and vegetable oil fuel can be used in casting, firing, kiln, welding, industrial production and other industries that require a certain temperature. Vegetable oil fuel ignition technology can maintain clean emissions and fully comply with the regulations for industrial production heat.

    In terms of operating costs, vegetable oil fuels are about 20% and 25% lower than compressed natural gas and diesel, respectively. Now it has been maturely applied to metal surface treatment, decorative building materials icon and other production industries, which can reasonably replace traditional energy sources such as liquefied gas, coal, diesel, and gas.

    Vegetable oil fuel is used as kitchen fuel, which is widely used in hotels, restaurants, construction sites, night market food stalls, etc. Vegetable slag oil fuel can also be used as an industrial clean fuel, which can be used in boilers, industrial burners, etc. Vegetable oil fuel is a non-toxic, non-smoke, no regret residue, no exhaust gas, no fouling, safe and economical clean fuel.

    The use of vegetable oil fuels is widespread.

  6. Anonymous users2024-02-02

    Fuel oil is flammable and classified as a dangerous good.

    The nature of fuel oil mainly depends on the nature and processing method, and the main specifications that determine the quality of fuel oil include viscosity, sulfur content, pour point, etc., and the fuel oil used in power plants and other fuel oil also has provisions on vanadium and sodium content.

    Most petroleum products can be used as fuel, but fuel oil has different interpretations in different regions. The European concept of fuel oil generally refers to the black viscous residue left behind by distillation.

    or its admixture with lighter components, mainly used as fuel for steam furnaces and various heating furnaces, or as large-scale slow diesel fuel and as various industrial fuels.

    In the United States, however, it refers to any flammable liquid or liquefiable petroleum product with a flash point of not less than that, which can be either residual fuel oil or distillate fuel oil. Distillate fuel oil can be obtained not only directly from distillation**, but also by distillation from other processes such as cracking.

  7. Anonymous users2024-02-01

    There are many kinds of fuel oil, which are widely used, depending on where it is used, industry, heating, catering, etc., each used is different, and the national standard division is also different, and it is not a hazardous chemical for catering.

  8. Anonymous users2024-01-31

    Fuel oil can be used for fires and is more economical. Whether it is a hazardous chemical can be seen as flash point and corrosiveness. Flash points below 60 rounds are considered hazardous chemicals.

  9. Anonymous users2024-01-30

    Fuel oil is a liquid fuel oil that can be used as fuel in kitchen boilers. The state stipulates that the flash point of fuel oil, greater than 60, is not a hazardous chemical, of course, this should not be in the hazardous chemicals catalog.

  10. Anonymous users2024-01-29

    Look at what fuel oil you are talking about, liquefied gas is used in kitchen industrial boilers, methanol fuel, alcohol-free fuel liquefied gas is a high-risk product, there have been many accidents in recent years, and many places are not allowed to use liquefied gas.

    Methanol fuel is based on methanol, which itself is a hazardous chemical. It is also controlled and the calorific value is not high, not explosive, but flammable.

    At present, alcohol-free fuel is alcohol-free, not a hazardous chemical, non-flammable and non-explosive, and can not be directly ignited by open flames, and the safety factor is quite high.

  11. Anonymous users2024-01-28

    If there are several, if the flash point is lower than 60, it is a hazardous chemical, and the flash point higher than 60 is not a hazardous chemical.

  12. Anonymous users2024-01-27

    There are many kinds of hazardous chemicals, which can be queried in the catalog of hazardous chemicals, and the raw materials can be checked directly. It is best to ask the local safety supervision bureau public security and fire protection, because some local policies are more strict.

  13. Anonymous users2024-01-26

    There are many types of fuel oil. At present, we are making alcohol-free water-based fuel, which is not a hazardous chemical, and the heat quality is twice as high as methanol, and it will save about 20% compared with methanol.

  14. Anonymous users2024-01-25

    Summary. Hello! Fuel oil is flammable and classified as a dangerous good. Fuel oil is mainly made of cracking residue oil and straight-run residue oil of petroleum, which is characterized by high viscosity and contains many non-hydrocarbon compounds, gums and asphaltenes.

    Hello! Fuel oil is flammable and classified as a dangerous good. Fuel oil is mainly made of cracking residue oil and straight-run residue oil, which is characterized by high viscosity and contains more non-hydrocarbon compounds, gum and asphalt ruler.

    So you can't take planes, trains, subways, or those you can't carry.

Related questions
9 answers2024-03-21

In the periodic table, the names of elements 1 and 20 are hydrogen, helium, lithium, beryllium, boron, carbon, nitrogen, oxygen, fluorine, neon, sodium, magnesium, aluminum, silicon, phosphorus, sulfur, chlorine, argon, potassium, calcium, and their element symbols are h, he, li, be, b, c, n, o, f, ne, na, mg, al, si, p, s, cl, ar, k, ca >>>More

9 answers2024-03-21

Harmless, the lethal dose of 7200 is 1 80 of the weight of the creature, you can calculate how much you inhale.

9 answers2024-03-21

Boiling point refers to the temperature at which the vapor pressure of a liquid (pure liquid or solution) is equal to the outside pressure. If no external pressure is indicated, it is considered to be kPa. For the solution of difficult volatile solutes, due to the drop in vapor pressure, in order to make the vapor pressure of the solution reach the external pressure, it is necessary to make the temperature exceed the boiling point of the pure solvent, so the boiling point of this kind of solution is always higher than the boiling point of the pure solvent, this phenomenon is called the boiling point of the solution, the greater the concentration of the solution, the more the boiling point rises. >>>More

9 answers2024-03-21

Extraction is a means of separation, then your purpose is to separate the things mixed with iodine, that is to say, there must be something else in your water, so you have to use CCL4 to bring out I, and then carry out other operations, at this time, only I can carry out the reaction in CCL4, if there is only I in the water, then of course it can be distilled directly, and there is no need to operate later.

10 answers2024-03-21

Regarding resin defoamers, you can use the epoxy resin defoamer developed by Yuheng Chemical, which is specially tailored for epoxy resin resin, with high compatibility, very low risk of surface defects, and can be used in systems that require transparency, especially for epoxy resin, unsaturated resin and vinyl resin system, which can be used for gelcoat, hand lay-up, jetting, fiber winding, casting, etc., with excellent cost performance, setting a new benchmark in the industry. In the solvent-free or high-viscosity system, the air mixed by mechanical force is often not easy to remove, with special interface properties, which can significantly inhibit the mixing of air in the early stage, reduce the production of bubbles, and help the escape and rupture of bubbles, so as to obtain a uniform and smooth surface, which can prevent shrinkage and porosity, and has an excellent effect on enhancing the gloss of the paint film. It has a good inhibition effect on the bubbles of high viscosity and high film thickness, especially the solvent-free high film thickness epoxy floor coating, suitable for the foam inhibition and deaeration of unsaturated polyester coatings, gelcoat, jetting, pultrusion, RTM, etc., which can reduce the occurrence of cavities and make the molded products have higher strength and flatness.