How to typeset a few 1 inch photos on 6 inch photo paper

You can set the word paper to 6 inches in the computer, the width is 15 2 cm, the height is 10 2 cm, and then the margins are set.

Set to a certain size. Then paste the 1-inch photo that needs to be printed into the word, set the size, and you can achieve it. The specific steps are as follows:

1 First of all, open the Word document on your computer, click Page Layout, and select a different page size under Paper Size.

2 Second, in the dialog box that appears, enter the size of the 6-inch paper (width is 15 2 cm and height is 10 2 cm) and click the OK button.

3 Next, click the Margins button again to select a custom margin.

4 Then, in the pop-up page margin setting interface, set the parameters in the following figure, move them up, down, left and right, and click OK.

5 At this point, paste the one inch you want to print into the document, and then double-click.

6 Then, in the height and width shown in the upper right corner, adjust the dimensions to width 2 5 cm and height 3 5 cm.

7 Finally, copy and paste the set ** one by one, and leave a space in the middle of each ** to complete the typesetting, as shown in the figure below.

6-inch photo paper can be printed up to 10 1-inch sheets, adjust the spacing between each sheet and each one to millimeters, divide it into two rows, 5 small sheets per row, and put it in the middle of the photo paper after arrangement, so that it is OK.

Up to sixteen sheets.

The size of the 6-inch photo paper is 102x150mm.

The 1-inch** specification is 25x35mm.

The layout is as follows: (14 sheets are recommended to leave a little margin).

If you don't have a template in your computer or printer, you have to combine 1 inch and 13 (or 15) copies into one in Photoshop, and then print it.

The general template is two lines, and the photo studio uses four sheets per line. ）

Sixteen at most.

Because the size of the 6-inch photo paper is 102x150mm.

The 1-inch** specification is 25x35mm.

In Photoshop, combine 1 inch ** and its 13 (or 15) copies into one**, and then print it.

Up to sixteen sheets.

The photographic paper is divided into four to five layers:

1. The basis of the paper base is the fiber paper base that meets the quality standards. The paper base of the photo paper must be white in color, uniform in texture, and not easy to deform. There are different thickness standards for paper bases.

2. Barium oxide layer. A thin layer of barium oxide is added to the paper base of the photo paper to fill the small defects of the paper base and increase the whiteness of the paper paper.

3. Add polyethylene resin layer to the barium oxide layer to prevent the chemical liquid from entering the paper base when the photo paper is developed. Photo paper without a polyethylene resin layer is called paper-based photo paper, and photo paper with a polyethylene resin layer is called plastic-coated photo paper.

At present, the types of silver salt printing photo paper on the market are:

Glossy photo paper: high brightness, good reflectivity, but easy to stain fingerprints, its clarity is the best, generally suitable for product photos, art photos, landscape photos;

Suede photo paper: the surface is rough, there is no reflection, it is not easy to stain fingerprints, and it is stored for a longer time, but the degree of translucency is lower than that of glossy photo paper, and the suede photo paper is relatively soft, especially suitable for expressing characters;

Silk photo paper: The surface is the effect of silk cloth, with silk texture, and the luster of silk fabric is presented under the light, which is gorgeous and delicate, and has a very three-dimensional effect.

16 hand-lined with light and shadow magic.

You can use the PS tool in the computer to typeset, create a new 6-inch canvas, and then adjust the corresponding ** to an inch size and arrange it on the 6-inch photo paper for printing. Here's how:

1. Open the PS software on your computer and select the file creation button in the upper left corner.

2. Enter the size of the 6-inch photo paper in the new dialog box that appears, such as width cm and height 10 cm. The resolution is 300 and the color mode is cmyk click OK.

3. Then click the file selection new button in the upper left corner of the software.

4. Create a new one-inch canvas in the pop-up new dialog box, with a resolution of 300, a color mode of CMYK, and a width and height of centimeters.

5. Then click the file in the upper left corner and select the Open button.

6. In the open dialog box that appears, select the photo you want to typeset and click Open.

7. Drag the photo you want to print with the left mouse button to the new one-inch canvas, and press the Ctrl and T keys to adjust ** to the appropriate size and position.

8. At this time, you can see that the one-inch photo has been made, click the layer button in the menu bar and select Merge Visible Layers.

9. Use the left mouse button to drag the created one-inch photo to the new 6-inch canvas.

10. Press Ctrl and J on the keyboard at the same time to copy 8 sheets.

11. At the same time, you can click the view in the lower menu bar to select a new reference line.

12. Select the required vertical and horizontal guides in the interface that appears to create multiple reference lines.

13. After the established reference line is arranged, arrange each photo neatly with the help of the reference line.

14. Click the File Select Printer button in the upper left corner.

15. Select the required printer to print out 8 one-inch photos on 6-inch photo paper items.

The size of the 2-inch ** is 35 53 mm and the resolution is 413 626 pixels.

Generally, 5-inch (9cm*13cm) photo paper is used, and a 2-inch can be arranged with 4 sheets of 2-inch **, and 1 inch **12 sheets can be rowed.

6-inch photo paper printing 2-inch ** How to typeset the method is as follows:

Tool Raw Materials: Windows7, Dell K550, PSCC version.

1. First, right-click on a two-inch sheet to print**.

2. Then find the Infiltrate Print option and click on it.

3. Then select the mode you want to print.

4. Then select the number of copies you want to print.

5. Finally, click Print at the bottom right of the screen to take a ride. Through the above operations, the two-inch ** was printed with a printer.