What are the installation methods of hot and cold vegetable basin faucets?

Prepare the installation tools, check whether the supporting parts are complete before installation, common faucet spare parts are: hoses, rubber gaskets, showers, water removal, abductors, decorative caps, etc. Installation of single-hole basin faucet When buying a single-handle basin faucet, you should pay attention to the diameter of the water outlet, most of the water inlet on the market now belongs to the hard pipe, so you should pay attention to the height of the reserved water inlet, and 35 minutes from the basin down is the most suitable.

When installing, a special angle valve must be selected, and the angle valve must be fixed with the cold and hot water pipe of the wall outlet. When you notice a distance between the angle valve and the faucet water pipe, go and buy a special extension pipe to connect. Remember, be sure not to use other water pipes to connect, because if the water pressure is high, it can easily fall off and leak, causing you losses.

If the inlet pipe is too long and exceeds the outlet pipe, you can cut off the part according to your needs, and if the angle is not suitable, you can bend it moderately to the position you need as needed. Remember: don't bend hard to 90 degrees or more.

When installing the basin to drain the water, do not forget to buy a small connector (short to the faucet). Don't forget to rinse the water pipes buried in the wall before installation. Installation of shower and bathtub faucets (wall-mounted) When you buy shower, bathtub, and wall-mounted faucets, the spacing between hot and cold water pipes must reach 15 cm.

Be sure not to forget to rinse the water pipes before installation, so as not to cause damage to the faucet due to the water quality. Concealed shower and bathtub faucets: After purchasing concealed faucets, the valve core of the faucet should generally be embedded in the wall.

Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the spool will not be able to be buried. Do not easily remove the plastic protective cover of the valve core when it is buried, so as not to damage the valve core with cement and other chores during the embedding.

In addition, when the valve core is embedded, you should also pay attention to the direction of the valve core up and down, left and right, so as to avoid the valve core being buried wrong. If there is a deviation in the size of the wall-mounted faucet when the water inlet pipe is embedded, it can be adjusted with an adjustable crutch for calibration. Installation of thermostatic faucet Before installing the thermostatic faucet, please check whether the water pipe is hot on the left and cold on the right, and remember not to connect the hot and cold water pipes incorrectly, so as not to make the faucet work properly.

Gas and solar water heaters cannot use thermostatic faucets because the water pressure is too low. When installing a thermostat, don't forget to install a hot and cold water filter.

Installation method of hot and cold vegetable basin faucet: Before installation, we will prepare the tools that may be used, and one will use the following tools: wrench, waterproof tape; In addition, you have to check the hot and cold water dragon to hold the hot and cold water faucet first, and then fix the fixing column and two screws, and then install the water inlet pipe.

Whether the head supporting parts are complete, common faucet spare parts are: hoses, rubber gaskets, showers, water removal, crutches, decorative caps, etc. After that, it is necessary to fix the hot and cold water faucet in the basin, fix the horseshoe when installing, and then turn the nut of the matching screw in, and then install and tighten it with a tool.

Then connect the inlet pipe to the outlet on the wall and you're done.

Hot and cold water faucet is still used more in the bath, when installing need to check which side is cold water and which side is hot water, usually the left side is connected to hot water, and the right side is connected to cold water, after the alignment, use waterproof tape to wrap the joint a few times to prevent water leakage, and then screw the faucet on the interface, tighten the faucet with a wrench, open the switch to check, the direction of hot and cold water is correct, the water flow is normal, and there is no water leakage. The installation of the hot and cold water faucet in the vegetable washing basin is also relatively simple, generally speaking, there will be two hoses, first put the copper buckle and a rubber pad into the two hoses, and then put one end of the two pipes out of the washing basin hole, and then put the rubber pad into the hose, and the copper wire into it. Then take the faucet over, screw the screwing of the pipe, screw it on the faucet, and the copper wire should also be screwed.

Finally, put it into the hole of the vegetable washing basin, tighten it with a copper buckle to fix the faucet, and finally connect the two pipes to the water outlet.

Abstract As long as the single vegetable basin faucet does not touch other items, any position that does not rely on the side of the person is OK, choose this when the vegetable basin, you can let the designer make a hole in the position you like when designing. If some people are left-handed, then it is recommended that the faucet is placed on the left side, then if we are a normal person, it is mostly placed on the right side, because it is more convenient, and some faucets are placed in the middle of this basin. All in all, which side of the faucet is placed is adjustable, not fixed, and you can choose which side you like to place it.

In which direction is the single sink faucet installed.

Wait a minute.

This installation can be on the left or right up, the vegetable basin faucet is not divided into left and right, because it can be rotated 360 degrees at any time when it is installed, including its neck can also rotate 360 degrees, you want to left on the left, want right on the right.

Why can't you put it in the middle?

The kitchen sink is a necessary container for the kitchen, and in the kitchen feng shui design, the kitchen sink feng shui is closely related to our health. The sink and the faucet are inseparable, the faucet represents wealth in feng shui, and the kitchen should pay attention to the installation of the sink in a ventilated place.

It can be installed in the middle, and before installation, check whether the basin and downspout are flat. After installation, the water bearing test is carried out for 2 hours to observe whether there is overflow. Generally, it is very convenient to install it in this bathroom.

What I asked was why the sink faucet didn't put it in the middle of the sink.

It is okay to install the faucet in the middle, and now most families are installed like this, which is convenient to use and can effectively prevent water splashing.

The washing basin is a single basin, and the basin mouth is 45 30, do you think it is better to put it in the middle, or on both sides, please say their respective reasons.

Why don't you speak?

As long as the single basin faucet does not touch other items, any position that does not depend on the side of the person is OK, choose this when the vegetable basin, you can let the designer make a hole in the position you like when designing. If some people are left-handed, then it is recommended that the faucet is placed on the left side, then if we are a normal person, it is mostly placed on the right side, because it is more convenient, and some faucets are placed in the middle of this basin. All in all, which side of the faucet is placed is adjustable, not fixed, and you can choose which side you like to place it.

This is determined according to the individual's usage habits.

Many consumers will definitely encounter the installation of vegetable basin faucets when installing kitchen equipment, but many owners are not very clear about the detailed installation method of this vegetable basin faucet, so the owners will encounter a lot of trouble in installing vegetable basin faucets. So let's take a lookVegetable pot faucetFirst, the installation method of vegetable basin faucet.

1. The method of installing the faucet of the kitchen washing basin: first of all, the valve core of the faucet should be embedded in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding.

If the wall is too thin, the spool will not be able to be buried with nuclear pants. The plastic protective cover of the valve core cannot be easily removed when it is embedded, so as to avoid damage to the valve core by cement and other chores during the embedding.

2. When embedding the valve core, you should also pay attention to the direction of the valve core up and down, left and right, so as to avoid the valve core being buried wrong. Try to avoid the size deviation of the wall-mounted faucet when the water inlet pipe is embedded, so we can use the adjustable crutch to calibrate. Before installing the thermostatic faucet, you need to check whether the water pipe is hot on the left and cold on the right, and remember not to connect the hot and cold water pipes incorrectly, so as not to make the faucet work properly.

3. The faucet is generally fixed with a solenoid and a nut. These include: a threaded part that engages the faucet and extends through the mounting hole and can only be turned on the platform; A nut threaded to a threaded member that passes through a mounting hole to the underside of the platform, and the nut moves in response to the direction of rotation of the threaded part toward and away from the underside of the platform.

Second, what are the faucet brands?

1. Jiumu Kitchen and Bathroom was established in 1990, and its brand is the best mid-range, famous for its hardware faucet products and developed into an overall bathroom brand, which is the top three bathroom brands in China in terms of comprehensive strength.

2. Dilang was founded in Hong Kong in 1992, and its brand mainly produces hardware pendant faucet products, and the faucet bathroom brand with a high selection rate of engineering hotel projects. The ** of this brand also belongs to the mid-to-high-end.

3. Founded in 1998, Pulemei focuses on the R&D and production of stainless steel sinks, faucets, showers and other bathroom hardware products. The product is made of 304 stainless steel, which is durable, safe and healthy, and energy-saving and environmentally friendly.

4. Orex was established in 1990, and its brand is mainly faucet hardware pendants, and it is one of the earliest faucet hardware export enterprises in Zhejiang. And the brand's ** is also very reasonable.

5. Huayi was established in 1991, Huayi brand is one of the largest leading hardware export enterprises in China, and was transferred to the domestic market in 2011. With an annual production of more than 10 million sets of medium and high-end faucets and bathroom accessories, it is one of the largest and most professional plumbing and bathroom manufacturers in China.

The above content is the arrangement of the installation method of the faucet in the vegetable basin and the faucet brand, I hope that after reading this article, more consumers can understand the brand of the faucet.

1. All the accessories of the hot and cold water faucet and check the manual, first connect the two water inlet pipes to the water inlet of the hot and cold water faucet.

2. After connecting, put the fixed column of the hot and cold water faucet into the two water inlet pipes.

3. After everything is done, install the hot and cold water faucet on the basin, and put the water inlet pipe at one of the openings of the basin.

4. Finally, fix the horseshoe piece and tighten the bolts and nuts.

1. Tighten the main water valve until there is no water flowing out of it.

2. It is necessary to connect the cold water pipe and the hot water pipe to the water inlet respectively.

3. Next, the faucet should be firmly installed on the water supply pipe.

4. Connect the faucet to the wash basin and tighten it with screws.

What is the installation of hot and cold water faucets in the kitchen? 1. Find two water inlet pipes and connect them with the water inlet pipes of the closed cold and hot water faucets respectively.

2. Thread the fixed pillars of the hot and cold water faucets along the water inlet pipe.

3. After the attack is sorted out, install it on the top of the basin and put the water inlet pipe.

4. Use the horseshoe sheet to fix the water inlet pipe and tighten the screw cap.

5. Install the faucet.

What should I pay attention to when installing kitchen faucets? 1. The installation strength should be moderate.

When installing, you can't blindly use force, the strength of the installation is also to be controlled, not too big, not too small, if the installation force is too small, then there is no way to fix it during installation, and it will also affect its stability and firmness. If you install too hard, you may cause some damage to this faucet.

2. It should be installed in order.

Before installation, you should also read the manual, the installation should be from the requirements and the order, if not in order, there will be water leakage, the faucet installation is not good, and it may also affect its use, but also will leave a relatively large safety hazard.

3. Clean the water pipes.

Before installation, check that the water pipe is not clean, and then see if there are any impurities, if there are some impurities and dirt, it is also necessary to clean it up in time, in the future use, if there is relatively large sand and gravel in the pipe, it will also bring some pollution to the water quality, and there may be blockage or damage problems.

Installing a kitchen hot and cold water faucet requires the following steps:

1.Locate the faucet: Install the hot and cold water faucet in the right place under the kitchen sink to ensure easy access.

2.Install the handle of the faucet for hot and cold water: Install the handle of the faucet for hot and cold water in the desired position to ensure that the installation is secure.

3.Install water pipes: Lead hot and cold water pipes out of the faucet and connect them to the plumbing system. Pay attention to the color and identification of the hot and cold water pipes so that they can be distinguished.

4.Test the faucet: Once the installation is complete, turn on the faucet and test its temperature and flow. Make sure the faucet is working properly and meets the needs of use.

5.Dismantle and install other equipment: If you need to install other equipment in your kitchen, such as an oven, dishwasher, etc., consider connecting hot and cold water faucets to other devices for more convenient use.

Installing a kitchen faucet requires careful consideration of the location, installation method, and usage needs to ensure that the faucet is easy to use and meets the safety requirements for use.