Yoyo Lightbringer is lube there maintenance oil?

The place where the lubricating oil is generally applied is the place where the bearing is clamped, and the 2A ball must be used. Note that it must not be applied to the surface of the bearing, because this will cause the bearing to be burned, greatly shorten the life of the bearing, and also have a great impact on the rope. (ps:

At the same time, remind you to take out the rope every time you finish playing the ball, otherwise the moisture sticking to the sweat of the hand on the rope and the contact with the bearing will also lead to raw curtain) Like the Lightbringer, which is a professional 1A fancy ball, I think there should be no need to oil it if you can use it, because this kind of ball is not suitable for novices at all. If the 1a ball is to be oiled, it is the kind of very thin oil, and it must not be thick. Otherwise, increasing the friction is equivalent to wiping out the performance of the ball.

Washing the shaft depends on the individual, some people like it, some people don't like it, let me talk about the reasons first. Washing the shaft brings a longer sleep time for the ball at the same time, but also is equivalent to speeding up the oxidation reaction of the bearing, because after the shaft is generally washed, no matter how dry the bearing is, the metal anti-oxidation film on the surface of the bearing has been washed away when washing the shaft, and the bearing will quickly become strong when it encounters air. To a certain extent, this reduces the service life of the bearing, unless you are using ceramic bearings.

If you want to buy something for washing shafts, it is easier to buy. It is advisable to use a lighter oil (just the one that can inflate the lighter) or a sewing oil. The former is easier to use, and volatile, when washing, remember to pick off the dust cover on both sides of the bearing with a needle, and then soak the whole bearing in the engine oil.

If you can't find the film box, you can use the mineral water bottle cap instead) soak for about 3-4 years, then take it out, temporarily use a paper towel to absorb part of the water, and then dry. But if there is anything you don't know, you can continue to ask, and I will do my best

It's the same as the usual ball! The specific method is as follows: In this link, we will introduce how to clean the oil and debris in the bearing.

Although this will make the bearing more susceptible to rust (oxidation), it can greatly improve the idling of the YO-YO. Please prepare the above things first The jar that says "ZIPPO" is fire engine oil, which is used to clean the bearings, the reason for choosing it is easy to find and the effect is very good, it can generally be found at the high-end fire machine or tobacco counter of the department store, but you can use other appropriate items to clean, but WD-40 is said to corrode the bearing, use it with caution. (The spout of the ZIPPO engine oil is generally white, if you see the red spout of the ZIPPO is likely to be a fake) and on top of it is a film cylinder, which is to hold the oil, and the cleaning process is also carried out inside, of course, you can find other similar utensils instead.

The utility knife is the tool I use to remove the bearing shield, but there are other alternatives. The other tools are secondary, the tweezers are used to clamp the bearing, of course, you can use your hands, and the vice is to remove the yo-yo bearing. First of all, we remove the bearing of yoyo, if it is yoyojam's yo-yo, we will send out the vise When we wash the bearing, we will remove the dust cover of the bearing, so that the cleaning can be completed quickly, and the following will introduce a method.

I like to use a ring knife (utility knife) on the tool, the blade can be cut off with pliers, generally first at the spring retaining ring "open the knife", please see: the spring retaining ring is picked out, basically it is over, the dust cover is very easy to pick out, if you are proficient, this thing is very simple to do beautifully, after washing, it is also possible to install the dust cover and retaining ring on the bearing, but when the bearing does not have a spring retaining ring or the spring retaining ring is too difficult to pick, we will directly destroy the dust cover, If the hardness of the dust cover is too great, you can change the tool, please see: you can pry up the dust cover from the inner ring position to deform it, and if there is a spring ring, you can extrude it together After the previous step is completed, we continue with the following work:

Now you can put the bearing into the film cylinder and then start to fill the fire engine oil (it is recommended not to smoke in the process) until the bearing is covered, then cover the lid and shake it slightly (if the oil is shallow to the hand, don't panic, because it is very volatile) and then open the cover to correct the position of the bearing, soak it for more than 10 minutes, or even shorter, so that the impurities that should come out are out (if you like it, you can soak it for 1 day or even longer) Take out the bearing, support it with tweezers, and try it by dialing it, By the way, shake all the oil in it or take it out and set it aside, wait for the oil to evaporate, and put it back on yo-yo to try the effect. Generally speaking, it is enough to wash it once, and if it is dirty, you can wash it again. The bearing that has just been washed can be a little uncomfortable, which is normal, and everything that moves has a run-in period.

After running-in, the bearings will be smooth.

Grease: Covered on the friction surface, it can isolate the contact between water, moisture and other harmful media and the metal, so as to reduce corrosion and wear, prevent rust and protect the metal surface.

Lubricating oil: It can form an oil film on the surface of the machine, and it is between two parts that are in contact with each other. As a result, the movement between the two becomes easier, smoother and faster, and the damage caused by friction is greatly reduced.

Maintenance oil: In order to give full play to the performance of the yo-yo and perfectly reproduce the skills, it is very important to maintain the yo-yo! Different types of yoyo have slightly different methods of care and maintenance.

Of course, when Yoyo can't rotate, you should consider whether the bearing has no oil, and when the yoyo makes a strange sound, you should also consider the bearing maintenance oil.

Where there is a cleaner, on the bearings.