Mini Router AP Mode Cannot Surf the Internet 5

Just set the networking mode to dynamic IP acquisition.

As we all know, routers have long been the core equipment of computer networks, and their importance cannot be underestimated, so do you know the router WiFi setting method for AP mode? The following is some information I have compiled about setting up AP mode on the router's wireless network for your reference.

How to set up AP mode for the router's wireless network settings:

In existing network applications, there are two types of environments that require the use of wireless routers as wireless switches (wireless APs):

The original network can only provide wired Internet access, in order to meet the mobile phone, notebook and other terminal equipment wireless access to the Internet, need to add wireless network.

The original wireless network has limited coverage, and the signal in some areas is weak or there are signal blind spots, so it is necessary to increase the wireless coverage.

This document describes how to set up a wireless router as a wireless switch (wireless AP).

The application environment is as follows:

A wireless router uses a topology diagram as a wireless switch (AP).

Connect your computer to the LAN port of your router and make sure that your computer automatically obtains the IP address and DNS server address.

Note: In order to avoid IP conflicts or DHCP server conflicts, do not connect the router to the front-end network here.

1. Change the SSID (wireless name).

Log in to the router management interface, go to Wireless Settings >> Basic Settings, modify the SSID, and click Save.

Note: Some routers will prompt that the parameters need to be restarted to take effect, and the router does not need to be restarted during the setup process.

2. Set a wireless password.

Go to Wireless Settings >> Wireless Security Settings. Select WPA-PSK WPA2-PSK, fill in the PSK password (wireless password) with no less than 8 digits, and click Save at the bottom.

On the router management interface, click DHCP Server >> DHCP Service, select DHCP Server as Inactive, and click Save.

1. Modify the management IP

In Network Parameters >> LAN port settings, modify that the IP address is not the same as that of the primary router (it is recommended to set the IP address to be the same as the primary router). When the setup is complete, click Save.

2. Restart the router.

The restart dialog box pops up, click OK, and wait for the restart to complete.

Connect the LAN port of the wireless router (that is, interface 1 and 4) to the LAN port (or LAN switch) of the front-end router according to the application topology diagram.

At this point, when the wireless router (wireless AP) has been set up, the wireless terminal searches for the message connected to the wireless network of the wireless router (zhangsan).

The AP mode cannot be routed, it is only equivalent to a wireless hub used, and it has to be recalled back to the router mode. Will your phone be a direct traffic instead of a router?

Have you set up your broadband account and password?

If you can connect, it means that the router is still working normally, and you need to check the connection of the router to the Internet, the specific steps are as follows:

1. It is recommended to consult the administrator whether the router is connected to the Internet;

2. Check whether other hosts or clients can access the Internet normally, and if so, consult the administrator whether the local wireless network card has been added to the MAC address blocking blacklist;

3. If the user has control of the router, he can log in to the router settings page to check whether the Internet connection has been established;

4. If the router is not connected to the Internet, check the connection of the router to the modem, the connection between the modem and the ** line or optical fiber, you can restart the router and the modem, and check the WAN port settings of the router;

5. Check if there is no effect on contacting the broadband operator.

If you don't have a network, you don't have it set up.