The heel of the new shoe grinds the foot, how to use the heel sticker?

1. Tear off the film on the bottom surface to expose the adhesive surface.

2. Stick directly to the place where the feet are grinding.

The function of the heel sticker: health massage, soft and comfortable, decompression and shockproof, reduce foot fatigue, etc. are mainly used in women's high heels, and women who often wear high heels to stand and walk are better to use, bringing her comfort and confidence.

How to use the follow-up post:

1. Clean or wipe the heel part of the shoe and let it dry, without leaving dust, stains, oil stains, and sweat stains;

2. It is recommended to put the shoes that need to be pasted on the heel for 2-3 days in a cool and ventilated place, and then paste the heel on after the part that needs to be pasted is dry;

3. Tear off the adhesive film of the insole, put the adhesive side facing backwards, and stick it to the appropriate part of the heel of the shoe; Note that the heel sticker should not extend beyond the edge of the heel of the shoe;

4. When pasting, pay attention to the dirt and other dirty things on your hands on the sticky substance attached to the heel, so as not to weaken the stickiness;

5. Paste from one end, paste a little bit, press it, paste the shoes for a day, and use it again the next day, it will not fall off, and pay attention to the suede and cloth shoes can not be used.

6. After wearing, please put the shoes in a ventilated place to dry to keep the inside of the shoes dry;

Just use the heel sticker!

Wearing high heels as standard, and when I was in college, I always wore small white shoes with a long skirt, which looked good and comfortable, no matter how violent I was, my feet were comfortable. After graduating, I worked for a larger company, and I was required to wear professional attire and pair it with flat shoes.

Open face heel sticker, it is soft hydrocolloid, soft on the foot, comfortable, and close to the skin color, you can't see it when you stick it, and it's not embarrassing to wear a short skirt. After tearing it off, it will not leave glue, and it will not leave traces, just like it has not been pasted, and the sense of use is still very good. Put it on before going out in the morning, even if you go shopping, your feet won't hurt, and you can finally go to work with peace of mind!

If you also like to wear high heels, remember to prepare this heel sticker first, it will be comfortable to use early!

If the upper of the shoe grinds the foot, it means that the gap between the heel and the shoe is large, so stick the heel stick to the lower end of the upper.

1. Tear off the film of the bottom Wang wheel to expose the adhesive surface.

2. Stick directly to the place where the feet are grinding.

The function of the heel sticker: health massage, soft and comfortable, decompression and shockproof, reduce foot fatigue, etc. are mainly used in women's high heels, and it is better for women who often wear high heels to stand and walk, bringing her comfort and self-confidence.

Method 1: Tools: pliers, hot towels, hammers.

1. Put the pliers inside the shoe and press against the heel area.

2. Use a hot towel to warm the heel of the shoe.

3. In the process of hot compress, hit the heel of the shoe with a hammer dozens of times, and the heel of the shoe will become soft.

Method 2: Tools: liquor, towels, tongs.

1. Soak the towel in liquor.

2. After that, wrap the wet towel tightly around the heel of the shoe.

3. Clamp it with the prepared clips and leave it overnight.

1. Adhesive tape: You can use adhesive tape to paste the part where the shoe and the foot grind together, and it will not be so grinding after a while. 2. Liquor:

Baijiu is volatile and a good softener. Pouring alcohol on a clean towel and gently rubbing it on the foot grinding area will make the slippers soft, which can relieve the slippers grinding feet to a certain extent. 3. Tool correction:

If the shoe version does not fit, you can use tools, hammers and other instruments to correct the shoes. <

1. Adhesive tape: You can use adhesive tape to paste the part where the shoe and the foot grind together, and it will not be so grinding after a while.

2. Liquor: Liquor is volatile and a good softener. Pouring alcohol on a clean towel and gently rubbing it on the foot grinding area will make the slippers soft, which can relieve the slippers grinding feet to a certain extent.

3. Tool correction: Some shoes are not factory from the regular manufacturers, and the shoe version does not fit, so it is necessary to use tools, hammers and other appliances to correct the core of the shoes.

4. Prop up with a drink bottle: Some new shoes don't fit perfectly with your feet. Choose a few drink bottles, cut them according to the shape of the shoes, and stuff them into the slippers to prop them up a little more, and the problem of grinding your feet can be alleviated.

1. You can use adhesive tape to stick it on the inside of the shoe. Cut a slightly larger round cotton cloth, peel off the back of the tape and glue it on.

2. Apply anti-abrasion foot ointment. Apply the ointment directly to the ground area, carrying the ointment but not to the blistered area. For blisters that have been ground out, you can use a plaster of **blisters.

The plaster looks like an oval-shaped band-aid and acts as a cushion between the wound and the shoe, reducing the chance of infection.

3. Use special shoe support tools. Spray the shoe with a spray to make it more elastic and place the shoe grip tool inside the shoe. Adjust the length of the shoe gripper tool, adjust the size of the shoe gripper tool, and place it in the shoe for 6 to 8 hours.

As soon as the time came, he took out the tool again through the handle and the knob. This method is very effective for loafers or dress shoes.

4. If the soles of your feet hurt, it may be because the soles are too hard. It is especially easy to have a toshino when wearing high heels. You can buy built-in pads that are specially placed on the soles of your feet and glue them to the corresponding places in the shoes. These built-in pads are usually oval or egg-shaped.

What to do with the new shoes grinding heelRegarding the heel grinding of new shoes, you can use a wet towel to put the grinding area on the foot for a few minutes. Knock a few times with a hammer to smooth out the part of the foot, and the leather of the shoe will not grind the foot when it becomes softer.

What to do if the new shoe grinds the heel1.Or the newspaper should be dipped in a little water, not too wet, but the whole newspaper should be wet, and then take a dry newspaper, pass the wet part and stuff it in the squeezed part, and then put the shoes in a relatively sealed place, and the next day it will be fine. If you have to clamp your feet because the shoes are too small, you can use a wet towel 50 to prop them up with a shoe contract.

It will be easy to wear the next day. Before putting the shoes on, take a bar of soap and apply a thin layer on the part that is in too much contact with the foot, so that the heel will be smooth and no longer rubble. There are many ways to do this.

2.It is recommended to buy shoes that are one size larger when buying shoes. Or buy shoes in a physical store, so that you can respond to the problem of shoes in a good time, and you can replace and return them in time.

You can also put a band-aid on it. Where the foot rubs too much against the shoe. It can effectively avoid foot abrasion.

In addition to this, you can also pour liquor on a paper towel and put the paper towel on the inside of the shoe where you grind your feet. Wait until they are dry before putting on your shoes so that your feet will not grind. When you usually grind your feet, you can either change the touch on the heel or on the forefoot of the foot, at this time, you can prepare some band-aids and stick them on the place where you grind the feet, so that you can effectively protect the soles of your feet from the damage of shoes.