How to tune the sound of the computer speaker, how to set the output sound of the computer speaker

Check your speaker's cable to make sure it's connected properly.

2. Right-click on my computer's Properties Hardware Device Manager to see if there is a yellow "" in front of the device? "Or"! If so, please reinstall the drivers for this device.

4. Reinstall or upgrade the sound card driver, there is a sound card driver on your motherboard driver, if you can't find the driver, you can ** a driver wizard to update the sound card driver. It automatically recognizes the driver, installs it automatically, and is up-to-date.

Sometimes you can restart your computer and it will be back to normal, I've tried it many times, but I don't know why it's back to normal! Hehe! Also, see if your volume waveform is set to the lowest.

Reboot it.

The steps are as follows:1. Turn on the computer and click the Select Sound button in the lower right corner of the computer.

2. Right-click to select and select the sound button in the open window.

<>5. After selection, this column will turn blue, click the OK button, and the computer will be set to the audio output.

If you want to set up your computer's speakers on your computer, how do you set it up? Let's share with you how to do it.

Win7 First, click on the small speaker icon in the bottom right corner of the taskbar. Tap Synthesizer in the volume settings that pop up.

Pop up the volume synthesizer and tap on the speaker. The speaker properties dialog box will pop up, click Levels, here you can adjust the volume of each input and output.

Click Enhance to check the desired effects, such as canceling the original sound, and you can also set the environment in which the speaker is located, such as a room. Click Advanced to select the sampling frequency and bit depth.

Click the microphone in the volume synthesizer to bring up the microphone properties dialog. Click Level to set the volume level and boost of the microphone.

Click Enhance to check the desired effect. Click Advanced to set the sampling frequency and bit depth of the microphone.

<> Material tool.

Computer, audio method.

Check to see if there is a power jack and two speaker jacks on your computer's stereo.

Please click Enter a description.

Plug in the jack cable of the computer speaker tightly to prevent it from falling off.

Please click Enter a description.

Match the color and plug the speaker cable into the jack of the main unit.

Please click Enter a description.

Open your computer's Start menu and select Control Panel.

Please click Enter a description.

Tap Hardware & Sound.

Please click Enter a description.

Select Sound.

Please click Enter a description.

Click [Speaker], adjust the sound to the required volume, and the computer's sound will be set.