How to add a router to the e Surfing gateway?

There are two ways to connect Router A and Router B: 1. The LAN port of A is connected to the WAN port of B, and the two routers are cascaded. If DHCP is enabled on Router A, the dynamic IP address of the WAN port is set to Router B, and the LAN port gateway of B is not on the same network segment as A to avoid IP conflicts.

The wireless settings of the router are set according to the manual. After the settings are complete, the LAN port of Route A is connected to the WAN port of Route B. 2. Connect the LAN port of A to the LAN port of B, and use the B router as a switch

Connect to the LAN port of Router B, disable the DHCP function of the LAN port of Router B, enable the LAN port setting of network parameters, and change the IP address of the LAN port so that Router B and Router A are on the same network segment. For example, the LAN port IP of router A is changed to B, as long as it does not conflict with other IP addresses that have been used. The WAN port parameters do not need to be set, and the wireless settings of the router are set according to the manual.

After the setting is complete, the LAN port of route A is connected to the LAN port of route B, and route B is equivalent to the expansion port of route A, which plays the role of a switch, and the computer can be connected to the LAN port of route B. You can add a wireless router 1, plug in the wireless router, don't pick up the cat first, and connect the computer to any LAN port of the wireless router. 2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page.

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet access and password. 4. Set the SSID, encryption method and password; 5. Save and restart. 6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

7. Wireless routers, you can use LAN 3 or 4 port at any time, first modify the router gateway IP is different from the routing modem, that is, the router LAN port IP cannot be 19216811, you can modify it to 19216821, etc. Set the WAN port of the router to dynamic IP mode, and set the wireless SSID and password. To learn more about service offers, click on the "****" customer service 324 below to answer for you.

Hello, the e-Surfing gateway can be used with an external router, the user connects the gateway and the router with a network cable, and logs in to the router background after connection, because the telecom e-Surfing gateway has its own routing function, so the WAN port of the router needs to be set to automatically obtain IP mode, after the setting is completed, the wifi signal name and password are set up, and the router can be saved and restarted to take effect. For more service discounts, please pay attention to "Anhui Telecom"***.

Summary. Connect to the WAN port of the wireless router. If it is a fiber modem (e-Surfing gateway) that needs to be dialed up to connect to the wireless router, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router; 2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page. 3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet access and password. 4. Set the SSID, encryption method and password; 5. Save and restart. 6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Which port should the e-Surfing gateway connect router to?

Connect to the WAN port of the wireless router. If it is a fiber optic modem (Tianyi gateway) that needs to be dialed up to connect to the wireless router, set it up according to the following methods: 1. Plug in the wireless router, do not connect the cat first, and connect the computer to any LAN port of the wireless router; 2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page. 3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet access and password. 4. Set the SSID, encryption method and password; 5. Save and restart. 6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

How do you connect?

Thank you. You're welcome.

Which port is connected?

I didn't have an opening on it just now.

LAN means Local Area Network in Chinese.