How to choose a faucet? How to choose a faucet?

The problem is big and I just finished renovating. There are many kinds of faucets, such as kitchen, bathroom, and balcony. Of course, you can go up to the ** and search for the faucet to know a lot of kinds.

When choosing a faucet, you can start from the following aspects:

First, look at the use function and structure.

At present, there are a variety of faucet products on the market that are suitable for home use. However, no matter how many there are, they can be broadly distinguished in two ways. As far as the use function is concerned, it can be divided into three types: bathtub faucet, basin faucet, and kitchen faucet, and the ideal and effect can be achieved through different personal preferences.

According to the structural characteristics, it can be divided into three types of ceramic spool single-handle faucets, 90 switch faucets and spiral steady rubber faucets. The first two types of products are made of specially processed planes of industrial ceramics to open and close the water source. The latter category of products has a tendency to be phased out in the current market.

The key is that the first two types of products have the advantages of easy operation and flexibility, and are the most popular in terms of existing product structure. At the same time, there are also products that automatically adjust the temperature after being set and products that turn on and off the water source with photosensitive or infrared control.

Second, the choice of faucet surface and its coating.

The focus of the selection is to match the overall decoration of the interior according to the consumer's personal preferences and requirements. It is recommended that consumers choose those products that are more mature in processing technology and have reliable quality.

3. Identification of faucet quality.

1. When turning or pulling the handle, it should be light, flexible and free of jamming, and the faucets with jamming sense generally have more or less quality problems, or improper assembly, or improper debugging, and some may even be assembled from inferior parts.

2. Under normal circumstances, the faucet cannot identify whether there is leakage before connecting to the water source, but the purpose can be achieved by checking whether there is a sense of looseness in each connection part. Because this loosening can be the direct cause of the leakage of the faucet.

3. People generally do not like products with obvious defects on the surface, and the faucet is no exception. Therefore, attention should be paid to whether there are burrs, scorch points formed by poor electroplating quality on the surface of the faucet, no plating in some parts, and whether there are small holes and spots formed due to poor casting quality.

Fourth, the positioning of **.

In the group with more reasonable products**: the three-piece set of single-handle mixed faucet products** is about 1200 yuan-1800 yuan; secondly, the three-piece set of 90 switch mixing faucet products** is about 600 yuan-1000 yuan; The three-piece set of spiral steady rise rubber sealing faucet products** is about 400 yuan-500 yuan. The actual purchase should focus on ease of use and reliable performance.

It should be said that the above three grades of domestic products are generally affordable to consumers. In short, the products with reliable quality, good corporate reputation and responsible after-sales service are the preferred products of consumers. And the product is not enough to reflect the actual situation.

If there are some counterfeit or inferior products, they may be higher than normal products or only account for normal products.

Six, seventy, or even lower. Under normal circumstances, enterprises that are responsible for users and their own reputation, the technical indicators and data of their products can meet or exceed the relevant standards. On the contrary, there may be a large gap.

This view only represents the individual netizens of China Kitchen and Bath Network, and does not represent China-chuwei Network.

Faucets can be said to be the second most important factor in determining the health of water sources in your home, so it is necessary to choose a safe and healthy faucet. SoHow to choose a faucet? Faucet purchase tips:

How to choose a faucet 1, look at the material.

Now there are a lot of bright and stupid faucets on the market, there are all plastic, this kind of faucets are generally simple in process, the quality is not guaranteed, and they are not suitable for long-term use at home; In addition to the all-plastic faucets, there are ceramic, stainless steel, and the last one is all-copper. The most popular material choices on the market are all-copper faucets and stainless steel faucets.

All-copper faucets will generally use the plating process for surface processing, and the all-copper faucets after processing will have a beautiful shape; The best stainless steel faucet is made of 304 stainless steel, which is safe and healthy for consumers and has the characteristics of durability.

How to choose a faucet 2, look at the valve core.

The valve core is an important part that determines the experience of using the faucet, and the better faucets on the market are generally made of ceramic valve core, which has the advantages of heat resistance and wear resistance, and can be suitable for all water environments in the home, and the service life of the ceramic valve core is also very long, which avoids the dripping of the nozzle caused by the wear of the valve core.

In addition to the ceramic spool, there is a steel ball spool, the main advantage of this type of spool is its good pressure resistance, but its other advantages are not as obvious as the advantages of the ceramic spool, especially in the use of mission, the service life of the steel ball spool is short.

How to choose a land key to buy faucets 3, look at the style.

Make sure that the faucet matches the washbasin, sink, bathtub. To match the faucet mounting holes (single or triple holes) of the washbasin. It's best to blend in with the style of washbasins, bathtubs and bathrooms to add the finishing touch.

How to choose a faucet 4, look at the function.

Faucets have various styles and functions, and are generally used for washbasins, kitchen sinks, bathtubs, showers, bidets, etc. According to the function, there are generally ordinary, induction, constant temperature and so on. For example:

The sensor faucet has the function of automatic induction of water, and the water flows out when you reach the faucet outlet, which is convenient, hygienic and more suitable for public places (high-end) toilets.

How to choose a faucet 5, look at the brand.

Now the domestic kitchen and bathroom market is more mixed, how to choose a reliable faucet in a saturated market state? It is always right to identify the brand, which can provide consumers with more guaranteed product quality, and can also provide a perfect user experience and after-sales service.

The above is for you how to choose a faucet? The whole story of faucet buying tips.

In recent years, the problem of water pollution has become more and more serious, and our daily drinking water looks clean but in fact hides a lot of bacteria and impurities, so many families will choose household water purifiers to greatly improve water quality. At present, the water purification technology has matured, and the faucet water purifier has been welcomed by consumers with its lightweight, practical and economical characteristics.

Lisheng faucet water purifier ff1 can be used after connecting to the faucet, pure physical filtration method, no need to plug in and will not produce wastewater, but it can effectively filter out the residual chlorine in the water, remove sediment, adsorb different colors and odors, thereby greatly improving water quality.

The whole is the size of a palm, with two parts, the main engine and the filter element, in addition to being installed in the kitchen, the toilet and bathroom at home can be used. The button double-gear makes it easy to switch between tap water and purified water, and the filtered water is used to wash vegetables, cook, make soup, make tea, and make coffee. Make sure your family's drinking water is healthier and safer.

The composite ceramic filter element can be easily disassembled and cleaned (about 7 days is recommended) to remove dirt and impurities trapped on the filter element, effectively prolonging the service life of the filter element.

Lisheng faucet water purifier FF1 has three water outlet modes, and the rotary valve can be easily switched. (1) Raw water mode: large flow of tap water, to meet daily general use; (2) Water purification mode:

Clean and healthy water, which greatly improves the quality of food quality; (3) Water-saving mode: shower pressurized water, smooth flow rate, similar to shower effect, suitable for cleaning fruit and vegetable dishes and chopsticks.

1. Look at the electroplating.

The quality of the faucet directly affects the later use, there are many kinds of faucets on the market, the level is uneven, the quality of the electroplating layer is also very different, the quality of the electroplating layer is directly related to whether the faucet is durable.

Everyone doesn't want to buy a faucet that is easy to rust and has a blistering and peeling surface, so what about the electroplating?

With a good electroplating, the fingerprints will quickly spread out when pressed by the finger and will not leave traces. The inferior faucet will only cost more and more when pressed, and the fingerprint is not easy to disperse. Therefore, when purchasing, we must look at the electroplating layer, and the unqualified products of the electroplating layer can also reflect the problem of the material.

2. Look at the seams.

A good faucet with rounded seams without burrs and a smooth surface. When choosing a faucet, you can gently turn the handle to see if the relationship between the handle and the faucet is smooth, the switch has no gaps, and there will be no loosening when twisting. ↓

3. Listen to the sound.

Since the whole faucet made of brass is cast in brass, the sound is dull when it is knocked; The faucet with a crisp sound is generally made of alloy, stainless steel or ordinary materials, and the quality is relatively poor.

Therefore, the sound of the alloy faucet is crisp when it is struck, while the sound of brass is dull.

When purchasing faucets, it is necessary to consider the material, function, and modeling lamp, or from the aspects of water saving and durability. But a really good faucet should have the characteristics of water saving, durable, humanized, easy to clean, environmentally friendly, and convenient.

Purchase method 1: Material x0d x0a Traditional old-fashioned faucets and water pipes are easy to rust and pollute water quality. Stainless steel and copper faucets and pipes do not rust.

The steel ball valve has a strong and durable steel ball body and tenacious pressure resistance, but the disadvantage is that the rubber ring that plays a sealing role is easy to wear and will age quickly. The ceramic valve itself has good sealing performance, and the faucet with ceramic valve core is more comfortable and smooth in terms of feel, can achieve a high resistance to the number of openings, and opens and closes quickly, which solves the problems of running, rising, dripping and leaking. X0D X0A Purchase Method 6:

Hydroelectric Generator X0D X0A Recently, some high-end sanitary ware brands have launched automatic charging induction faucets, which can use the water to solve their own power needs. The faucet houses a computer board and a hydroelectric generator, equipped with an infrared sensor, to form a complete system. Put your hand under the faucet, and the sensor will pass the signal into the computer board in the faucet, turn on the water source, and the water will be generated and charged by the hydroelectric generator to provide the power you need.

At present, this kind of product is mostly used in public toilets, which has the advantages of convenience and hygiene. However, not all fully automatic faucets have water-saving functions, and some faucets are slow to respond due to poor quality, and the water is slow when the hand is close, and the closing is slow after the hand leaves, but a lot of water is shed in vain. Therefore, it is best to test the faucet on site and strictly control how to buy it.

The chrome plating process on the surface of the faucet is very particular, and it can generally be completed after several processes. The smoother and brighter the surface, the better the quality.

When turning the handle, there is no excessive gap between the faucet and the switch, and it is easy to open and not slip. However, the inferior faucet not only has a large gap, but also a large sense of obstruction.

The material of the faucet is the most difficult to distinguish. A good faucet is cast as a whole, and the sound is dull when it is beaten. If the sound is very brittle, it must be made of low-grade stainless steel, which contains more iron elements, and the quality will be a grade worse.

If you really can't distinguish the mark, you can choose a more formal brand. For example, the international high-end kitchen and bathroom brand - Pulemei, generally formal products have the manufacturer's brand logo, while some informal products or some quality products are often only pasted with some paper labels, or even no markings, you must pay attention when purchasing.

1. Look at the surface first. The body of the faucet is made of brass, bronze (or copper alloy), polished and formed, and then chrome plating and other surface treatments. The formal product body casting and surface treatment have strict process requirements, and after neutral salt spray test, there should be no rust in the corresponding period of time.

Therefore, when choosing a faucet, you should pay careful attention to its surface.

2. Gently turn the handle, whether it is light and flexible, and whether there is a sense of blockage and stagnation. A faucet with a seamless switch, easy and non-slippery is better. The gap of inferior quality is large, and the sense of obstruction is large.

3. Knock on the main body of the faucet, whether the sound is dull, and carefully observe the faucet interface, whether it is a copper body, if the sound is crisp when knocking, it may be made of stainless steel and other materials, of course, it is worse. Look at the various parts of the faucet, especially whether the main parts are tightly assembled, the valve body and handle of a good faucet are all made of brass, and the weight is heavier and there is a sense of solemnity.

4. Check the various parts of the faucet to observe whether the assembly is tight and whether there is a sense of looseness. Generally, single-handle mixer faucets are accompanied by installation dimension drawings and instruction manuals when they leave the factory. Before installation and use, the product packaging should be opened to check the certificate, etc., so as to avoid the use of "three no" products.

Faucets** are not very expensive, but they are cumbersome to replace and a waste of resources. Therefore, when buying faucets, on the premise of advocating water saving, we should choose faucets that are durable, practical and have a long lifespan. It is recommended that you can go to the ** meeting site to see, it will be more reliable.