Xiaomi mobile phone is flooded Can you turn on the phone if you dry the water What if it turns on

Mobile phone water treatment method:

1. Shut down immediately.

If the phone falls into the water, you need to salvage the phone immediately, and quickly press the power off button to turn it off, if it is a detachable phone, then we can take out the battery, memory card, etc. first. Powering off your phone first will prevent your phone's battery from being short-circuited**. If the phone is dropped vertically, it is best to pick it up vertically.

2. Remove moisture.

After scooping up the phone, you need to wipe the surface of the phone with a clean towel and other items, and then wipe the earphone jack and other parts with a fine cotton swab. Do not shake your phone dry too hard, as this may allow water from the surface of the phone to seep deeper into the area.

3. Blow dry with a hair dryer.

For the moisture inside the phone, we can use a hair dryer to dry it. Do not use hot air in the process of using the hair dryer, keep a certain distance between the hair dryer and the mobile phone, it is best to let the wind blown out of it close to room temperature, do not direct the air outlet of the hair dryer to the mobile phone, usually the hair dryer blows the mobile phone for about 20 minutes.

4. Drying treatment.

Next, we're drying the phone. Rice has good water absorption, we can wrap the phone in a paper towel and put it in the rice. Usually sealed and stored for 12 hours is fine.

Generally, if the mobile phone is not flooded for a long time, it can be turned on normally. We can also put the mobile phone together with desiccant, drying box.

5. Check your phone.

If the mobile phone can be turned on normally, then we need to check whether the parts of the mobile phone can be used normally, for example, whether there are traces of the screen of the mobile phone, whether its earpiece, microphone, and speaker can be used normally, whether the camera of the mobile phone can take pictures, etc.

6. After-sales maintenance.

If the phone has been soaked for a long time, or the phone cannot be turned on after treatment, we had better send it to a professional for repair.

Summary: It is best not to press any button on the mobile phone before it is thoroughly dried, and do not frequently switch on and off the test to prevent damage to the mobile phone due to short circuits and other reasons.

Hi! It will cause the motherboard of the phone to burn out. It is recommended that you go to a Xiaomi authorized service point for inspection and repair. Check the address of your local Xiaomi authorized repair point.

Hope mine can help you!

Basically, it has been broken, and the vast majority of mobile phones will be short-circuited when the battery is in contact with the metal of the mobile phone at the moment they are submerged in the water, and they will naturally not be able to turn on.

It's best not to rush to turn it on, remove the battery, and dry the phone with a blow dryer. Pay attention to the temperature.

You can't burn it out as soon as you turn it on, take a hair dryer and dry it before you can turn it on.

It's likely to break, and it's best to get it repaired.

Do not turn on. Blow the wind. In the bar, the phone is buried in your rice tank.

Put it in the rice and bury it overnight, you can use it, and the rice will absorb the moisture in the phone.

Remove the battery and blow it with a hair dryer, it will definitely work.

What should I do if my phone gets water? You must know this first aid method!

Many people think that the mobile phone is broken, but in fact, there is no need to repair it, and it is good to use it at home.

Don't press the power button, remember, the hair dryer blows, don't press the power button when the water enters, wait for a day and then turn it on to try, if it doesn't work, send it for maintenance.

Buy a hot air blower to blow on, be careful not to get too close, it is best to send it after-sales, and there is a rescue. You can also take it apart by yourself, go to the smart gang to see, there is a disassembly tutorial over there,

1. After the mobile phone is flooded, please do not try to turn on the phone or press the power off button. The SIM card slot should be removed as soon as possible.

2. Wipe the water stains on the surface of the phone as much as possible, and then place the phone in a strong absorbent environment (such as: activated carbon, rice, moisture-proof agent) for 48 hours.

Water ingress on the phone. Whether it falls into a basin of water or is covered with water, it is a serious problem. If it is more serious, it is likely to lead to the direct scrapping of the mobile phone.

Summary. 1. Wipe the water stains on the surface of the mobile phone, use a heat gun (or hair dryer) to heat the back cover of the mobile phone, use a suction cup and a triangular pry to cut the adhesive along the seam of the back cover and remove the back cover (note that the pry does not scratch the line in the mobile phone). 2. Use a screwdriver and pick blade to remove the mobile phone motherboard, camera, vibration motor, cable and other parts; Disconnect the cable from the battery and the phone, roll and remove the battery glue with tweezers, and remove the battery.

3. Remove the screen fixing screws and remove the screen; Wipe all parts with clean absorbent material, and then put them in a dehumidifier to remove the remaining water (usually more than 12 hours). 4. Put all the parts back together and try to turn it on. If it is turned on smoothly, it means that the mobile phone can be used normally, and if you find an abnormality, you need to go to the mobile phone after-sales service.

1. Wipe the water stains on the surface of the mobile phone, use a heat gun (or hair dryer) to heat the back cover of the mobile phone, use a suction cup and a triangular pick to cut the adhesive along the seam of the back cover of the pants and remove the back cover (note that the pry does not scratch the line in the mobile phone). 2. Use a screwdriver and pick blade to remove the mobile phone motherboard, camera, vibration motor, cable and other parts; Disconnect the cable cover bucket between the battery and the phone, roll and remove the battery glue with tweezers, and remove the battery. 3. Remove the screen fixing screws and remove the screen; Wipe all parts with clean absorbent material, close the grinding, and then put all into the dehumidification box to remove the remaining water (generally more than 12 hours).

4. Put all the parts back together and try to turn it on. If it is turned on smoothly, it means that the mobile phone can be used normally, and if you find an abnormality, you need to go to the mobile phone after-sales service.

The best way is to put it in a plastic bag, put it in the rice, and if it can't be turned on the next day, it can only be sent to the warranty.

How to deal with the water that the Xiaomi mobile phone is flooded and can't be turned on, dear, hello 1, first of all, when you accidentally find that your mobile phone is in water, you should pick it up immediately, the longer the mobile phone is soaked in water, the greater the damage, so you should not hesitate to pick it up if you find that your mobile phone is in water. 2. After picking up your mobile phone, you must not perform any key operations on the mobile phone, especially if it is a touchscreen smartphone. You should carefully remove the back cover of the mobile phone battery, peel off the mobile phone battery, and power off the mobile phone.

3. After the power is off, you can carefully wipe it with a dry cloth, and then you can move on to the next step after wiping off the external water droplets. 4. Please note that you must not use a hair dryer to dry your phone, otherwise, the high temperature is likely to cause devastating damage to the sensitive components inside the phone. 5. Next, put the external wipe of the mobile phone into a sealed container, wrap some plastic bags on the outside, and use rice to fill the container, so that the mobile phone is submerged in the container, and it is better to leave it for 1 2 months.

In general, if possible, put in desiccant for better results. 6. After the phone is dry, take out your phone, install the battery, and try to turn it on. If it can be turned on successfully, then the mobile phone can be used normally, if it cannot be turned on normally, it is recommended to send it immediately to the after-sales service with professional equipment for processing.

Summary. If your Xiaomi phone gets into water and won't turn on, it is recommended that you take the following measures:1

Power off immediately: Press and hold the power button of your phone, force it to power off and unplug the earphones, charger and SIM card, etc. 2.

Remove the battery: If your Xiaomi phone can remove the battery, you can remove the battery as soon as possible. This will help avoid issues such as short circuits in the battery.

3.Drying treatment: According to the water ingress of the mobile phone, the drying treatment is carried out under suitable conditions.

You can try to keep your phone in a dry and ventilated place, avoid exposure to the sun and moisture, use moisture absorbers, etc. 4.Go to the after-sales service center:

If none of the above methods take effect, it is recommended that you immediately go to Xiaomi's official after-sales service center or a professional repair organization for inspection and repair. Finally, in order to prevent problems before they happen, it is recommended that you also pay more attention to them and try to avoid using mobile phones for water activities such as aquariums, swimming pools, and seashores, so as to avoid water on your mobile phones.

If your Xiaomi phone gets into water and won't turn on, it is recommended that you take the following measures:1Immediate shutdown:

Press and hold the power button of your phone, force it to shut down and unplug the earphones, charger and SIM card, etc. 2.Remove the battery:

If your Xiaomi phone can remove the battery, you can remove the battery as soon as possible. This will help avoid issues such as short circuits in the battery. 3.

Drying treatment: According to the water ingress of the mobile phone, the drying treatment is carried out under suitable conditions. You can try to keep your phone in a dry and ventilated place, avoid exposure to the sun and moisture, use moisture absorbers, etc.

4.Go to the after-sales service center: If none of the above methods take effect, it is recommended that you immediately go to Xiaomi's official after-sales service center or a professional repair organization for inspection and repair.

Finally, in order to prevent problems before they occur, it is recommended that you also pay more attention to them and try to avoid using your mobile phone for activities in aquariums, swimming pools, seashores, etc., so as to avoid water on your mobile phones.

Excuse me, but please go into more detail?

If your Xiaomi phone gets into water and won't turn on, it is recommended that you take the following measures:1Immediate shutdown:

Press and hold the power button of your phone, force it to shut down and unplug the earphones, charger and SIM card, etc. 2.Remove the battery:

If your Xiaomi phone can remove the battery, you can remove the battery as soon as possible. This will help avoid issues such as short circuits in the battery. 3.

Drying treatment: According to the water ingress of the mobile phone, the drying treatment is carried out under suitable conditions. You can try to keep your phone in a dry and ventilated place, avoid exposure to the sun and moisture, use moisture absorbers, etc.

4.Go to the after-sales service center: If none of the above methods take effect, it is recommended that you immediately go to Xiaomi's official after-sales service center or a professional repair organization for inspection and repair.

Finally, in order to prevent problems before they occur, it is recommended that you also pay more attention to them and try to avoid using your mobile phone for activities in aquariums, swimming pools, seashores, etc., so as to avoid water on your mobile phones.

Xiaomi mobile phone can't turn on the machine when water enters it, hello dear, don't turn it on without permission if there is a lot of water, and don't blow it with a hair dryer, because at high temperatures, water vapor will fill the body, and the motherboard will be even worse, send it to the mobile phone maintenance personnel to clean the motherboard1Shutdown: This is definitely the first step to save the phone, no matter how much water ingress the phone, please turn it off first, otherwise it will burn out the circuit directly.

2.Check the location of water ingress: In most cases, the location of a large amount of water ingress into the mobile phone is generally the headphone jack and charging hole, because as long as it is not broken in other places, there are no cracks.

3.Check for external damage: if it's simply soaked in water, it's not a big problem.

However, if it rains and falls out, it is necessary to check whether there is any water entering the cracks of the hand spring machine. 4.Simple water intake:

If it's just a simple water intake, then take a hair dryer, adjust it to the cool air setting of the empty cavity, and dry it with a small breeze. Because most of the shirts get water through the headphone hole, the phone has to stand up. 5.

Wait a few days before turning it on: simply enter the water, when the phone is dried, you can turn on the phone and use it normally, of course, if you can't turn it on, it can only be that the water enters too much, and the circuit inside is broken. It should be sent for repair in time.

<> Xiaomi phone accidentally gets into the water, you can try the following ways to deal with the phone urgently to avoid secondary damage:

1. Please take the mobile phone to a dry and ventilated place as soon as possible, and use a dry paper towel or towel to blot the water stains on the surface of the mobile phone.

2. If the mobile phone is in a slippery state when it is turned on, please press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please remove the SIM card and microSD card as soon as possible.

4. Please bring your mobile phone to the after-sales department of the mobile phone brand for testing and processing as soon as possible, so as to avoid unnecessary losses.

Xiaomi hand indiscriminate combustion engine.

If you accidentally get into the water, you can try the following ways to deal with the phone urgently to avoid secondary injury:

1. Please take the phone to a dry and ventilated place as soon as possible, and use a dry paper towel or towel to blot the water stains on the surface of the phone.

2. If the mobile phone is turned on, please press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please remove the SIM card and microSD card as soon as possible.

4. Please bring your mobile phone to the after-sales department of the mobile phone brand for testing and processing as soon as possible to avoid unnecessary losses.