How to solve the problem of water suction pump worker heating and peculiar smell

First of all, it is necessary to understand the working principle of the suction pump: when the suction pipe of the self-priming pump is air, the negative pressure (vacuum) formed when the pump is working is used to operate at atmospheric pressure.

Under the action of the water pressure below the pump, it is discharged from the drain end of the pump. There is no need to add "diversion water" before this process.

Thirdly, it is necessary to know exactly where the heat is generated.

and odorous. However, most of them are caused by problems with the coil when it is working, and there are external reasons or internal causes. External causes of external resistance that make it difficult for the shaft to rotate, and then the electrical energy is converted into mechanical energy.

Decreases and increases the heat energy, resulting in the heating of the coil and the production of peculiar smells. The internal cause may be that the suction pump has been used for a long time, resulting in the aging of the coil and the increase of internal friction resistance, which causes the coil to heat up and cause peculiar smell.

Finally, the solution:1Locate the external resistance source of the suction pump and remove it.

2.After the suction pump works for a long time, stop working for a while and then resume work. 3.

Open the inside of the pump and other parts that can be opened to remove the debris inside to ensure that the pump can work normally. 4.If the above does not solve the problem, you can replace some parts such as the coil on the pump or buy a new pump!

1. If it is new, it is that the winding insulating paint has not been baked; 2. The old motor is winding water or moisture; 3. Aging and heating of winding insulation; 4. The capacitance value decreases, and the speed decreases, causing heating; 5. If the power supply voltage is lower than 180V, the motor will also heat up. These are the most common types of repairs. If there is a high temperature odor, it means that your motor is seriously demagnetized, or the rotor sweeps the hall, generally the motor is aging before the above situation, it is recommended not to repair, it is normal to change the new motor load to work slightly heated, if the rapid heating is caused by a large load, you need to replace the water pump with a larger power!

Having said all that, I hope it will be useful to you.

What kind of pump are you? Is the motor and pump integrated? If it is integrated, it may be that the motor is heating, the load of the motor is too large, exceeding the rated current or running under a large load for a long time, which may cause the motor to overheat, and there will be a smell of baking motor insulating paint.

The solution is to reduce the load, e.g. by reducing the suction height of the pump!

If there is a high temperature odor, it means that your motor is seriously demagnetized, or the rotor is swept away, and it is generally the aging of the motor that will appear on the top, so it is recommended not to repair it and replace it with a new one.

It is normal for the motor load to work slightly hot, if the rapid heating is caused by a large load, you need to replace the water pump with a higher power!

What kind of pump is it? Submersible pumps, self-priming pumps? If the self-priming pump is heated, check the motor fan, if it is normal, whether the medium is too hot or the running time is too long.

Get out of it and run as far as you want.

The self-priming pump motor has a peculiar smell due to the high temperature generated by the motor coil winding.

Take it to the sun and wait for about 3 hours.

What is the suction pump used for, how much power is it, and what is the specific purpose.

If you encounter such a problem in your life, then don't drink it anymore, if there is a peculiar smell in the water in your life, it may be polluted. If it is a problem with the water source, then it is necessary to solve it first, or connect a filter at the inlet to remove the odor. You'd better find an installation worker to help you solve it, and now you don't know your specific situation, or find a professional to help you be more reliable.

It's a problem with the tea table pump! The smell comes from the water pump! It would be nice to change the water pump.

I changed the pump and the smell didn't know the ** problem.

This is not a problem with the tea stove, it is a problem with water, you can buy a high magnetic water purifier for use, and the problem will be solved.

If the water smells, it is recommended to install a water purifier, which is safe and healthy! The water pump has rust and can only be slowly disassembled and cleaned!

Installing a water purifier can filter to remove odors, rust, sediment, etc.