How to solve the problem of Windows 10 not connecting to the Internet?

First, it can be repaired through the computer manager network repair function.

1.Open PC Manager and click Toolbox.

2.Locate the Network Repair Tool.

3.Click "Fix Now".

2. You can also use commands to reset the network.

1.Find "Run" in the Start menu

2.Then enter cmd in it

3.In the command prompt that appears, type "netsh winsock reset.""Press the "Enter" key.

It takes effect after restarting the computer.

What should I do if the wireless network of the win10 system cannot be automatically connected 1. The wireless network in the lower right corner of the win10 system has a fork, which means that win10 is not automatically connected to the wireless network when it is started, as shown in the figure below. 2. Click the wireless network icon to pop up the menu, and select the wireless network signal that can be connected in the menu, as shown in the figure below. 3. After checking, check the automatic connection at the bottom, and then click Connect, as shown in the figure below.

4. Enter the wireless network connection password and click Next, as shown in the figure below. 5. Click Yes directly, as shown in the figure below. 6. Well, the wireless network is connected, and when you open the win10 system in the future, the wireless network will be automatically connected, as shown in the figure below.

7. At this time, the wireless network icon in the lower right corner of the win10 system shows the signal icon.

Windows 10 can not connect to the Internet, first check whether your hardware driver is normal, you can right-click on the computer or this computer, select Management-Device Manager, and then see if the network card driver is normal. If the driver is okay, if you are using a notebook, check whether the wireless network card is turned on, if you can't find the network, the switch of the wireless network is not opened, some of the notebook is a hardware switch, some are a combination of key switches, you can search for the notebook model how to turn on the wireless network.

The method is as follows: 1. Check whether the wireless network device can be found, if the mobile phone can connect to this wifi, then it is a problem with the computer.

2. Check whether the wireless network is turned on, if the switch is not turned on, you can press and hold fn and f5, and the wireless network switch can be turned on.

3. If the wireless network switch is turned on, but it still can't be connected, check whether the driver is installed correctly in the right-click management of my computer.

4. The driver may not be installed well, you can uninstall the driver and reinstall it.

5. If the above operations are invalid, there may be a hardware problem, and you can repair it.

The specific steps are as follows.

1. Use the Win + R shortcut key combination to open the Start Run dialog box, then enter the cmd command when it opens, and then click "OK" at the bottom.

Start running the dialog box.

2. After that, enter the administrator command operation, and then we type the netsh winsock reset command, and then press the enter key (enter) to confirm, as shown in the following figure:

Upgrade win10 can not go to the Internet solution.

This method can solve the problem that all browsers in win10 cannot access the Internet. If it still hasn't been solved, please check whether there is a problem with the win10 system, and you can also install some new graphics card drivers to try.

**Settings: 1. After entering Windows settings, click to open "Network and Internet (WiFi, Airplane Mode, VPN)".

2. Switch to "**" and turn off "Use installer script"; (This may be due to the use of SSR).

Win10 system app store, Microsoft Edge, etc. cannot be connected to the Internet.

Internet Options.

2. Enter the "Internet Properties" window.

3. Switch the upper tab to "Connection", and then click "LAN Settings".

4. In the "LAN Settings" window, check the auto-detection settings and uncheck "Use Auto-Configuration Script" (the principle is the same as above).

12WIN10 system app store, Microsoft Edge, etc. cannot be connected to the Internet.

Intermittent flashing indicates that the network connection is normal. How do I test if it's a problem with my router or my computer? First of all, you should connect to the wireless network through your mobile phone to see if you can connect to the Internet.

If it can be connected to the Internet, it means that the system or the driver generated by the computer hardware is not able to connect to the Internet. From ** we can judge that you are a PC computer. He does not have the function of wireless networking, and there are two main reasons why he cannot connect to the Internet.

One is that the network port is plugged in incorrectly, and the other is that the network is not connected.

Just for these 250. Your question is very simple, you look at your Ethernet 11, right mouse button, status, details, tell me what the IPv4 address you see!

First of all, check whether the router is connected to the network, for example, the mobile phone can be connected, it means that there is a problem with the computer network card, and the solution is to reinstall the network card driver or update the driver.

First, reinstall the system to see how it goes. Second, see if the router and password are saved.

Can I access the Internet normally without connecting to the route? It could be a router setup issue... If it doesn't work, call the customer service and let the master come to check the light cat.

Does your phone have internet access? Being able to access the Internet is not a problem with the router. That's the problem with the computer and the cable. Is your computer fine and not surfing the Internet? Do you know how you got it?

This kind of problem is suitable for face-to-face solving, and it is really not possible to communicate.

The solution to the computer is not connected to the Internet.