What should I do if I can t connect to the Internet after connecting my computer and router?

Hello, route settingsYou can set it up by following the steps below!

1. Connect the home network cable to the WAN port of the router, 2. Connect your computer with another network cable at one end, and connect your routing LAN port at the other end, (the LAN port is the interface marked on the route!) ）

3. Turn on the computer, open the browser, enter the route login IP in the address bar, 4. Enter the route login and password in the pop-up dialog box, friendly reminder, if you don't know the route login IP, login and password.

code, you can turn the route over and look at it, and there is a writing on the back of the route!

5. After entering the routing setting interface, the quick setting interface will generally pop up, and you can select the broadband dialing method in this interface.

PPPoe, enter the Internet and password!

6. After the settings are completed, save the exit and restart the route!

Once the routing restart is complete, your routing hardware connection and setup are complete!

Please follow the above method to check if your routing connection and settings are correct!

Is this how your home network connects?

The default address of your router is at the bottom of the router, if you haven't modified it.

That's where you can enter.

on the computer. The IP address is set to be obtained automatically.

After the router is connected, it needs to be set up, and the connection and setting method between the cat and the wired router is as follows:

Connect the network cable connected by the cat to the WAN port of the router, that is, the blue socket, plug in the power supply, connect the network cable to the computer from any of the other four sockets, open the browser, enter the IP address of the router in the address bar, generally speaking, the original IP address of the router is to see the router instruction manual) appears to log in to the router interface, enter the username and password, generally speaking, the username and password are admin, log in to the router, run the setup wizard, click next to select ADSL virtual dialing, Click Next, enter the password (provided by the network operator) for your standalone Internet access, and then the screen prompts "Congratulations, you are ready to surf the Internet" or similar language.

Hello, whether you have not set the broadband account and password of the router, enter the router to take a look, if it is connected but the network is abnormal, it is a broadband fault and needs to be reported for processing.

First check whether the mobile phone link wifi is normal, and then test whether the Internet link is normal without going through the router directly, if it is normal, it is your network cable from the router to the computer that has a problem.