Hello, what s the matter with the router being set up but not connecting to the Internet

Route settingsYou can set them up by following the steps below!

1. Connect the home network cable to the WAN port of the router, 2. Connect your computer with another network cable at one end, and connect your routing LAN port at the other end, (the LAN port is the interface marked on the route!) ）

3. Turn on the computer, open the browser, enter the route login IP in the address bar, 4. Enter the route login and password in the pop-up dialog box, friendly reminder, if you don't know the route login IP, login and password.

code, you can turn the route over and look at it, and there is a writing on the back of the route!

5. After entering the routing setting interface, the quick setting interface will generally pop up, and you can select the broadband dialing method in this interface.

PPPoe, enter the Internet and password!

6. After the settings are completed, save the exit and restart the route!

Once the routing restart is complete, your routing hardware connection and setup are complete!

Please follow the above method to check if your routing connection and settings are correct!

Many friends think that the dial-up connection of the router is over after setting up, but in fact, there is still one point that is not completed. Because the following settings are not completed, many friends encounter 691 errors in dialing, or can connect to the network, but it will be dropped after a short time. Let's continue with the setup:

Click the MAC address clone menu in the network parameters menu on the left sidebar, click Clone MAC address in the interface that appears, and click Save. At this point, the router will prompt you to restart the router, click OK to restart the router.

After the router restarts, close the Internet Explorer.

Connect the WAN port of the router with an incoming network cable, and then connect the computer to the LAN port of the router with a network cable to start surfing the Internet.

These processes are done and absolutely ready to use.

The description of the problem is too detailed, and it can only give you a solution idea.

Step 1: You turn off the wireless router and try to see if you can connect after a few minutes.

Step 2: If it can't be used normally, connect it directly to the computer with a network cable to see if it can be used, if it can't be used, it may be a network card or operator problem.

Step 3: After trying the above two steps, after eliminating the operator problem, update the wireless network card driver.

But,I feel like you're probably setting up the router wrong.,There's no screenshot or description.,It's hard to judge.。

Hello dear! There are several reasons why the router can't connect to the Internet: 1. First of all, check whether it is due to the sudden drop of the main line or the cat's line.

In this way, although there is a routing signal, you still can't access the Internet. 2. Check whether it is due to the power failure of the computer room caused by the voltage instability during the peak period of electricity consumption, a friend of mine who works in Netcom said that this situation is possible, especially in small and medium-sized cities, mainly during the cooking period, and the electricity is used more, resulting in unstable voltage. 3. If it is not the voltage reason, please restart the router.

Find the reset button, press and hold it for 3s to see if the problem is solved.

The router suddenly can't connect to the Internet, it may be caused by broadband failure, arrears, or router crash and instability, and there is a solution [love you]: Router 1Power off your router and modem and restart them once.

2.Check that the network cable on the router is connected correctly. The WAN port of the router should be connected to the network port and LAN port of the optical modem. If the broadband modem is not used, the broadband network cable of the home should be connected to the WAN port of the router.

The LAN port on the router is used to connect to the computer. Note: Make sure that the network cable is firmly connected and not loose, and that the network cable is not damaged, otherwise it will also cause the router to be unable to connect to the Internet.

3.Check whether your broadband payment is in arrears? If you are already in arrears, you can access the Internet after paying the fee.

4.Check the status of the Optical Signal or LOS indicator on the modem, if it flashes solid red, it may be a broadband line fault or a problem with the modem. In this case, contact your carrier to resolve the issue.

If you have a computer at home, you can remove your router first and connect the computer directly to the modem broadband.

I hope this content can help you, and I wish you a happy life [love you] [love you].

Check that the broadband password is correct.

Have you gone to the router** to set up your broadband.