When the computer is turned on, I hear the whistle appear, and English does not turn on

Immediately after booting, press f8 to the advanced option to appear in the let go, select "the latest correct configuration" enter to repair, not yet press f8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also dead, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, uninstall all the inappropriate things before the accident, or restore the system or reinstall).

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

If you can't turn on the machine by any method, this is caused by a sudden shutdown, caused by disk damage, one is to deduct the motherboard battery and put it on for a while, and the other is to put it on for a period of time to try to turn it on, or you can't repair it.

Remove the memory module, clean up the dust, wipe the gold finger on the memory module, and install it tightly on the motherboard.

Summary. Hello. As far as the description is concerned, first of all, there will be a drop, indicating that the computer hardware is normal and the self-test has passed. Visually inspect software issues or hard drives.

Secondly, as far as the ** you sent later, it prompts a power supply problem, it is recommended to shut down the power and unplug all external devices, such as mouse, keyboard, speakers, etc. Then get off the hard drive and boot it again to try it out.

Then it's still this prompt, saying that you have a problem with the power supply and need to change the power supply.

Finally, if it is normal, the U interface is caused by a surge, after the shutdown and power off, all the equipment is connected to the test, if not, use it like this, the power supply can be considered to be replaced, if it will, the power supply will be replaced.

As soon as the computer is turned on, English appears, and it can't be turned on.

Hello. As far as the description is concerned, first of all, there will be a drop, indicating that the computer hardware is normal and the self-test has passed. Visually inspect software issues or hard drives.

Secondly, as far as the ** you sent later, it prompts a power supply problem, it is recommended to shut down the power and unplug all external devices, such as mouse, keyboard, speakers, etc. Then get off the hard drive and boot it again to try it out. Then it's still this prompt, saying that you have a problem with the power supply and need to change the power supply.

Finally, if it is normal, the U interface is caused by a surge, after the shutdown and power off, all the equipment is connected to the test, if not, use it like this, the power supply can be considered to be replaced, if it will, the power supply will be replaced.

Hello. As far as the description is concerned, first of all, there will be a drop, indicating that the computer hardware is normal and the self-test has passed. Visually inspect software issues or hard drives.

Secondly, as far as the ** you sent later, it prompts a power supply problem, it is recommended to shut down the power and unplug all external devices, such as mouse, keyboard, speakers, etc. Then get off the hard drive and boot it again to try it out. Then it's still this prompt, saying that you have a problem with the power supply and need to change the power supply.

Finally, if it is normal, the U interface is caused by a surge, after the shutdown and power off, all the equipment is connected to the test, if not, use it like this, the power supply can be considered to be replaced, if it will, the power supply will be replaced.

In a word, there is a problem with the power supply, and the life is almost up.

Thank you, you can turn on the power after unplugging the wire, will this problem be caused by the tripping at home yesterday.

Thank you, you can turn on the power after unplugging the wire, will this problem be caused by the tripping at home yesterday.

Yes, if it trips frequently, and the computer runs under high load, it actually hurts the power supply, and if the power supply is relatively poor, it will cause the power supply and the motherboard to be burned.

Okay, thank you.

You're welcome, I don't know how to continue to ask, and I am satisfied and praised. <>

The English language that appears is important, and it is better to add it.

The reason why the machine can't turn on and display English is:

1. The operating system file is corrupted.

2. The MBR meter is damaged.

3. The hard disk data cable is loose.

4. The hard disk is broken.

Solution: 1. Reinstall the operating system.

2. Use a USB flash drive.

or disc boot, into the PE system.

Use partitioning software to repair the MBR table (some software calls it Repair Boot).

3. Check the hard disk data cable and power cable, plug in the connector tightly, and replace it with a new one if the cable is broken.

4. If you can recognize the hard disk in the BIOS, reinstall the system.

Try it, if you can't reinstall it, try to repartition the hard disk, if you can't separate the dust split, try low-level formatting.

Hard disk. I can't recognize the Changran hard disk in the BIOS, so I can only send Xun Zao to replace the new hard disk.

1 Short: The system starts normally. There is nothing wrong with your machine.

2 Short: General error, please go to CMOS Setup and reset the incorrect options.

1 long and 1 short: There is an error with the RAM or motherboard. Try to change the memory, if it still doesn't work, you have to change the motherboard.

1 long and 2 short: The display or graphics card is wrong.

1 long and 3 short: The keyboard controller is wrong. Check the motherboard.

1 Long 9 Short: Motherboard Flash RAM or EPROM error, BIOS corruption. Try a different block of flash ram.

Constant ringing (long sound): The memory module is not plugged in tightly or is damaged. If it still doesn't work, you can only replace a memory module.

Repeated, short ring: There is a problem with the power supply.

It may be that the memory module is in poor contact, otherwise look at the BIOS settings.

It's possible that something on the motherboard isn't plugged in.

There may be a problem with the boot file and you need to reinstall the operating system.

If the laptop fails to turn on, you can troubleshoot it as follows:

1) First remove the battery, unplug the power plug, press and hold the power button for about 5 seconds, and then plug in the power to see if it can be turned on, if it still can't be turned on, continue the following steps.

2) Remove the battery, unplug the power plug, and open the back cover screws with a Phillips screwdriver. There is an opening on one side of the cover, and the cover can be removed by gently cocking it along the opening with a screwdriver.

3) After removing the cover, find the memory module, and use a screwdriver to gently remove the clips on both sides of the memory module, so that the memory module can be released. He gently removed the memory module and waited a moment before putting it back on.

4) Cover the cover plate in reverse according to the disassembly method, install the battery, and turn on the power button to restart.