Xiaomi Mi 6 how to change the screen tutorial, Xiaomi mobile phone to change the screen

The steps to change the screen of Xiaomi Mi 6 are as follows:

1. After removing all the screws, use tweezers.

Pry open the back panel. <>

2. Pry up the wire with tweezers.

3. Take out the motherboard.

4. Use tweezers to the boot cable and side buttons.

5. After peeling off the battery skin, tear off the cable.

6. Remove the battery.

7. Install a new screen and you're done.

This kind of dismantling tutorial is not recommended to go to Xiaomi Home after-sales Xiaomi 6 just out of the problem should be repaired free of charge Moreover, if it is dismantled without permission, the official will not be responsible for after-sales.

Summary. Go to Xiaomi's official after-sales repair shop for repair. If you go to Xiaomi's official authorized repair shop for repair**are unified across the country,The replacement screen**is1140 yuan,Xiaomi 12 proThe official replacement screen**is1590element,It should be noted that:

There are only two above to replace the screen at the official after-sales maintenance point**, which means that no matter whether your Xiaomi 12 mobile phone is broken with the inner screen or just the outer screen, the after-sales unified can only replace the entire screen assembly for you, and the repair** is more expensive.

Go to Xiaomi's official after-sales repair shop for repair. If you go to Xiaomi's official authorized repair shop for repair, the ** is unified nationwide, the ** replacement screen ** is 1140 yuan, the Xiaomi 12 Pro official screen replacement ** is 1590 yuan, it should be noted that: the official after-sales maintenance point to replace the screen is only the above two**, which means that no matter whether your Xiaomi 12 mobile phone is broken with the inner screen or just the outer screen is broken, the after-sales unified can only replace the entire screen component for you, and the maintenance ** is more expensive.

2. Go to a third-party repair shop to replace the screen If your Xiaomi Mi 12 screen is broken, choose to go to a regular third-party repair shop to replace the screen, we can repair it according to the degree of screen damage: a, the screen can still be used normally, the screen display is normal, and the touch is sensitive, in this case, we can find a repair shop to replace the mobile phone screen alone, and the normal replacement of the mobile phone screen ** is about 400. b、The screen is dropped and cannot be used normally,The screen display has black spots、Streaks、Flashing screen or no display、Partial failure or full failure of the mobile phone screen,The above situations belong to Xiaomi 12The inner screen is damaged,If you repair it, you need to replace the entire screen,Maintenance**It may be about 1000 yuan。

No.

Xiaomi Mi 6 is a fully laminated screen,The touch screen and the display must be replaced together,The fully laminated screen uses OCA optical glue or UV glue to seamlessly fit between the LCD screen and the glass cover, so you can't just change the outer screen。

At first, the mobile phone screen usually adopts a non-full lamination process, and due to the large gap between the components of the screen and the air layer, the screen light transmittance is not good, and the specific effect is that the screen color is gray, and the screen is gray. The later screen full lamination technology is to take technical means to reduce the gaps between the layers, to achieve better capacitance fusion of one or several layers of protective glass, touch layer and liquid crystal layer, and to achieve better light transmittance.

It's totally possible, but some may not want to change it for you, so it's better to directly change the entire screen It's easy to operate and make more money.

Operating tool: Xiaomi Mi 6

Operating system: MIUI

1. Unlock your phone first.

2. Then find Settings on your phone's desktop and tap on it.

<>4. Then at the bottom of the open page, you can see a one-click change option, click on it.

5. Then there will be a one-click replacement page, according to the actual selection of the current mobile phone is a mobile phone or a new mobile phone, after the selection, it will pop up is imported from that kind of device, and you can choose according to your needs.

The Xiaomi Mi 5S was officially released on September 27, 2016, with a custom high-brightness screen and Snapdragon 821 flagship processor, the first non-perforated ultrasonic fingerprint recognition, and a "Night Eye" ultra-sensitive camera. Equipped with NFC function that can swipe cards, faster 4G+ network, and up to 600nit high-brightness pressure-sensitive screen. Many black technologies are changing the mobile phone experience bit by bit.

With a Snapdragon 821 processor with twice the CPU performance, UFS flash memory that is 87% faster, an Adreno 530 graphics engine that is 40% faster, and a dual-channel LPDDR4 that is 100% faster, Antutu has a staggering 140,000 points in the performance test.

Fingerprint recognition: Based on Qualcomm's ultrasonic fingerprint recognition technology launched last year, combined with Xiaomi's software algorithm, fingerprint recognition can be carried out without opening the home button of the mobile phone, while avoiding industrial technical problems such as home button wear and different colors.

In fact, thanks to the introduction of the groove design, this fingerprint recognition operation has become very similar to the "non-pressing home button" of the iPhone 7 and OnePlus 3, except that it is not a physical home button per se, but just a groove, and the main thing that really works is the sensor underneath it.

First, find the icon of the "Settings" item on the desktop of the Xiaomi Mi 6 mobile phone, and then click to enter, as shown in the figure below.

2. After entering the settings interface of the phone, drop down the menu and select the "Display" option, as shown in the figure below.

3. Finally, turn on the switch of the "Auto-rotate screen" column in the display interface, so that the phone will automatically switch to the screen, as shown in the figure below.

You mean auto-flip, and there's a Direction Lock button in the drop-down shortcut button in the status bar. If your drop-down shortcut button doesn't have a direction lock button, you can click the switch sort button in the lower right corner to move the direction lock button hidden below to the top.

In addition, you can also enter the phone settings, display, there is an auto-rotation screen at the bottom. Adjust as needed.