-
This Xiaomi Mi 6 may be a full egg quality inspection.
-
Essential tools: a Xiaomi mobile phone (take Xiaomi note3 as an example) 1. Find the "**" icon on the desktop of the mobile phone and click to enter.
2. Enter "**" in the call interface to enter the test interface.
3. Find "Touch Screen Test" in the test interface, click to enter, and perform touch screen proofreading.
4. Click on each box until the screen turns blue.
5. After the screen calibration is successful, "Pass" will be displayed after the touch screen test, so that the screen failure problem can be solved.
-
Xiaomi Mi 6 can't be charged into your dear, 1. The most common thing that causes Xiaomi mobile phones to not charge is poor contact, when you encounter Xiaomi mobile phones that can't be charged, try to replug and unplug the connection between the charger and the mobile phone; 2. In addition, reconnecting still can't be charged, please change to another mobile phone charger to try, you can also try to connect the Xiaomi mobile phone to the computer, if the problem is solved, then it should be the charger problem, if it is not solved, then the problem may be Xiaomi, it is recommended to contact Xiaomi's official customer service or after-sales! 3. In addition, if the Xiaomi mobile phone supports battery removal, then you might as well try to charge the battery once with a dock charge or universal charge; Xiaomi mobile phone can not be charged, the most is due to poor contact, if you can't solve the problem through the above methods, please follow the official tips to solve, the current solution on Xiaomi's official website is: please bring your mobile phone charger, data cable, battery and mobile phone to your nearest repair point to detect.
I hope it can help you, if my answer is helpful to you, please give a like (rate in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. Finally, I wish you good health and a good mood!
-
、About the aboveXiaomi mobile phone charging abnormal problem,First check if the original charger is normal.
Check whether there are problems such as poor contact inside the charging data cable.
Check the charging cable plugwithMobile phone charging tail plug, check the inside between the two, whether there is poor contact, etc.
Check if your phone's battery is normal(For this inspection, it is best to ask a professional master to test the mobile phone battery).
Through the above thorough inspection, if it is normal, then the problem with the mobile phone may be,Charge control circuitry on the motherboard,There was a hardware failure. FYI!
-
This charging anomaly is often caused by the charging interface or due to poor line contact. If the battery can be taken out, you can use the universal charge to fully charge the phone first. If you can't take it out, you can change a good data cable to charge your phone.
-
This is because the battery has deteriorated, the power consumption is fast, the charging is fast, and the battery life is short.
When the battery is out of power, 10% of the battery may suddenly lose power. Plug in the charger to charge, and soon it will show 15%, and then it will charge normally, but the charging speed has become faster.
Just plug in the charger and charge it. You can reseat the charger, restart charging, and use it as usual.
-
If this happens, you can restart the phone again or turn it off directly, and then wait for the phone to cool down completely before recharging it, so that the charging situation will change.
-
It doesn't matter, it will be displayed normally later.
-
So first of all, how long did you use this Xiaomi phone? If you use it for a long time, you may need to replace the battery, this is a battery problem, if the battery is normal, then drain the battery and recharge it.
-
Restart your phone and try a different charger.
-
This should be rare, and even if it is exhausted, it should not be the situation you said.
-
In this case of abnormal charging, we need to professionally detect some information about the motherboard and the information of battery capacity.
-
Let's take a look at it first, there's no need to rush this.
-
The Xiaomi Mi 6 cannot be charged, it may be caused by the failure of the charging port in the front of the mobile phone, or it may be caused by the failure of the mobile phone charger in your current mobile phone.
-
Xiaomi mobile phone can't be charged, it may be caused by poor interface contact of the mobile phone, because the interface of your mobile phone was damp before, so it is very likely that this is the reason.
-
Since the maintenance master said that the charging port is broken, let him repair it for you, let him replace it for you, why do you want to repair it yourself, do you think you have to be as high as your level can be comparable to the maintenance master? If you don't have special equipment, you can't detect it at all.
-
That may not be the reason for the charging port, Xiaomi's charging port is very cheap, and it is very simple to change the small board by yourself, in addition, you can go to after-sales maintenance, ** are all transparent.
-
This is a motherboard problem, not a charging port problem at all, so hurry up and change to the Redmi phone.
Of course, it's good to shut down. Because the boot will have current and is unstable, there will be the problem of burning the phone or battery, which can avoid electromagnetic radiation to the greatest extent. >>>More
For mobile phone enthusiasts, the biggest pain is that their phones cannot be upgraded to the latest system version. When Xiaomi officially announced that MIUI 6 was first adapted to Xiaomi 3 Telecom Unicom Edition and Xiaomi Mi 4 Unicom Edition, Xiaomi users who bought models before the Xiaomi 3rd generation couldn't sit still. >>>More
The new generation of iPhone6 6 Plus has the same warranty period as other iPhones, providing a one-year free warranty (man-made damage is not covered by the warranty), after the warranty, if the iPhone6 screen is damaged, then you need to spend money to replace it. At present, Apple has announced the iPhone 6 6 Plus screen change**, the details are as follows. >>>More
First, if the host power is turned on, it will prompt that the display frequency is out of range, and the best way is to clear the CMOS and make sure that the connection is normal. Both of these have the potential to raise the questions that the landlord said. >>>More
Xiaomi Mi 5, I heard that it will be unlocked with ultrasonic fingerprints, and it is very cost-effective.