How to change the user and password of the broadband connection between the two computers to connect

Method 1: Buy a router and connect the router to ADSL (use a network cable to connect the WAN port of the cat to the WAN port of the router, and then use a network cable to connect one end to one of the other four ports of the router, that is, the LAN port!) Okay, the line is connected!

All that's left is to configure the router, first start at the middle point of the computer - run --- input.

Or go to the router's configuration interface! (The login name is admin by default, and the password is admin) If you can't configure it, you can use the configuration wizard to configure it. The specific configuration is as follows:

Click to open the network parameter configuration option - point LAN port setting ---set IP to or specific can see the logo given on your router) subnet mask is saved--- in the point WAN port setting item--- WAN port connection type is set to pppoe, the second item is normal dialing, and then enter your home user login name and Internet password - save. Last step: Open the DHCP server options - click on the DHCP service --- below to configure as follows:

Tick the Enable DHCP option, the address pool starts and ends the IP can be set at will, but not for or this is the gateway address (can be set to choose between 2-254) the gateway is set to or it depends on the IP given on your home router) Save OK! At this point, you can have four machines connected to the Internet at the same time! Method 2:

You need to add another network card to your machine (no router required), and you can use Internet connection sharing technology to connect two machines to the Internet! Method 3: You still need to add a network card, and then **a**software can realize multiple machines to access the Internet at the same time!

Dairi software has ccproxy, wingate, sygate and isa server to name a few!

Both have internet access? To buy a router and 2 network cables, connect through the router Enter, username admin, password admin, just enter the password of the broadband into it, the router will be automatically connected, you don't need to enter it again!

Buy a router and go into the router to set up a router to dial numbers!! This way, both machines can be used without interfering with each other!

With a router, two computers can be connected at the same time

Broadband connection and password modification method:

1. Go to the operator for modification, such as Unicom business hall, etc.

2. Online modification, for example, Beijing Netcom has a self-service function, which can be modified and password after entering.

3. **Modification, just like **bank, you dial the operator's service**, and modify it according to the steps and prompts.

4. The router settings are displayed.

5. There are records on the documents when handling.

6. Go to the business hall through the ID number of the handler.

7. Call the customer service of the operator to inquire through the ID number of the handler, and the password can be changed.

Start by right-clicking on the network icon in the bottom left corner of your computer and selecting Open Network & Internet settings. Please click on the Wheel Bridge Entry ** description, and then click on the "Dial" button on the left side of the Network & Internet interface. Please click on the input **description in the dial-up screen, click on the sub-option "Broadband connection" and select the "Connect" button that appears.

Please click to enter **Description, and finally enter the wide oak belt and password obtained from the operator, click OK, and you will be successfully connected to the broadband network. Please click to enter Larumeng**DescriptionEnd Summary1、First, right-click the network icon in the lower left corner of the computer, and select to open the "Network and Internet" settings. 2. Then click the "Dial" button on the left side of the network and Internet interface.

3. In the dial-up interface, click on the sub-option of "Broadband Connection" and select the "Connect" button that appears. 4. Finally, enter the broadband and password obtained from the operator, click OK, and then you will be successfully connected to the broadband network.

Summary. There is a wireless network in your hand and a password, that is, there is a wifi network, and you want to connect to a desktop computer. Then your desktop computer must have a wireless network card, only with a wireless network card, you can connect to this wireless network through the wireless network card.

There is a wireless network and password in hand, and there is a wifi network in Yingchang, so you want to connect to a desktop computer. Then your desktop computer must have a wireless network card, only with a wireless network card, you can connect to this wireless network through the wireless network card.

Hope it helps.

It was a desktop computer before, there was no network card, and the account password was forgotten, so how to connect.

Open the network sharing center. The network sharing center is in the control panel, or you can open it directly on the desktop, click the network icon in the bottom right corner of the desktop - select Open Network Sharing Center. Establish a new network connection in the shared control panel.

The first option is to create a new network connection, we can see that there are options for broadband, click to enter to configure. Start by selecting the option that links to the Internet. Click Next and click Create New Connection, if your computer is not currently connected to the Internet, this screen will not appear.

If you are connected to the Internet, you still need to establish a network connection, and you can directly select a broadband connection after selection. Enter your username and password. This is used for broadband login, so be sure to enter the correct username and password, otherwise the login will not be successful.

The name of the broadband can be set by yourself. Create a connection. After clicking on the connection, the system will automatically connect to the network, and you can wait for the connection to be completed, at which time you need to rent your broadband has been connected.

If there is no connection, you can skip it directly.

Hope it helps.

What happens when this kind of page appears.

Did you follow the steps above.

Isn't the password wrong?

If you have an incorrect password and you can't connect, you can retrieve your password first.

How to find, the easiest and fastest way: the mobile phone generally also saves the wifi password prerequisite: the mobile phone can automatically connect to the wifi signal to the Internet.

You can check the wifi records saved in your phone to retrieve the wifi code. Huawei and other mobile phones can scan the wireless security password to see the wifi you have successfully connected.

You have a connection on your phone that can be retrieved. Good.