How to do the bathroom floor drain waterproof leakage

If it is the original waterproof floor drain leakage, you can first knock off the floor tiles around the floor drain, the diameter is about meters, be sure to knock on the structural layer of the house (the original waterproof layer), the floor drain is close to the structure layer around the hair, the depth is about 2-3cm, after watering and moisturizing, first use the plugging king (powder) to add water to make a thin mud, evenly smear the floor drain periphery, and maintain 2-3 times (watering) after drying; But it is worth noting that the waterproof layer is restored, it must be equivalent to the material properties of the old waterproof layer, if it is a water-type coating, you can use acrylic acid, JS polymers, if it is oily, you must wait for the plugging king material to dry completely, with 911 polyurethane paint, paint no less than 2 times, done, dry for more than 24 hours, you can do a closed water experiment, do not leak and then restore the floor tile.

1.Shovel away the tile grout at the leakage, and first use acrylic water-based waterproof grouting.

2.Then use the plugging agent to transfer the water, and use a scraper to hook the joints.

The construction process of waterproofing the bathroom by yourself, divided into three parts, and introduced the process according to the waterproof series products of Zhongshan Boxing Technology

The first is to do a good job of waterproofing the caisson, which is generally done with JS waterproof coating, and it is best to use XBHT super waterproof coating material to do it. 1. Do a good job of cleaning and leveling the caisson; 2. JS and cement are mixed and stirred at a ratio of 1:1, and 5% water can be added to dilute to improve the painting efficiency; Brush 4 times, every 1 2 hours, and judge the section by the temperature of the surface stem and construction; 3. After coating the JS waterproof coating, the yin and yang corners, the contact between the pipeline and the ground, use BXHT super waterproof coating material to paint a width of 10cm, and the waterproof construction of the caisson is completed.

The second is the waterproof construction of the ground after the caisson backfill: 1. Do a good job of cleaning and leveling the ground; 2. JS and cement are mixed and stirred at a ratio of 1:1, and 5% water can be added to dilute to improve the painting efficiency; Brush 3 times, every 1 2 hours, and judge the section by the temperature of the surface stem and construction; Waterproofing of the ground is completed.

The waterproof construction process of the wall: 1. Do a good job of cleaning and leveling the wall; 2. JS and cement are mixed and stirred in a ratio of 1:2, and 10% water can be added to dilute to improve the brushing efficiency; Paint twice, paint the wall height of meters, paint every 1 2 hours, and judge the section by the surface stem and the temperature of the construction; The waterproofing of the wall has been completed.

If you go to the building materials supermarket, there are professional waterproofs that are sold, and you will know if you ask.

Waterproofing and leakage repair in the bathroom is a more important problem, because moisture is easy to penetrate into the inside of the wall, causing the wall to peel and fall off, and in serious cases, it will also affect the downstairs neighbors. Here are some methods and steps to repair waterproof leaks in the bathroom:

1.First of all, it is necessary to determine the location of the water leakage, which is usually in the toilet, shower, sink, etc. You can use a small hammer to knock on the wall quietly, and the place where you find that the sound is abnormal is the leak.

2.After determining the location of the water leakage, it is necessary to clean up the debris and residue on the wall and floor to ensure the cleanliness of the water leakage location.

3.The third step is to repair the leakage, which can be repaired with cement until the leak is completely covered. You need to wait until the cement is dry before applying a layer of waterproof paint, and you can buy waterproof brush paint or roller paint on the market at any time.

4.After repairing the leak, the entire bathroom floor and walls need to be waterproofed. You can buy waterproof paint or waterproof membrane on the market for covering, you need to pay attention to avoid loopholes when brushing the paint, and pay attention to the tight docking when the membrane.

5.The final step is to wait for the waterproofing material to dry and then conduct a water test to check if the restroom is truly waterproof. It is necessary to pay attention to the water test to evenly moisten the entire bathroom, not only the leaky area.

In general, it may take time and patience to repair leaks in the bathroom, but it must be done well to ensure the comfort and safety of the living environment. If you are unsure about the operation, seek professional help.

1. Wipe off the water stains and clean the dust on the surface with a brush.

2. Spray waterproofing agent on the leaking place, and then make up for it with caulking material after it is dry.

3. Don't forget to do a good job of waterproofing the eggplant sock pie, you need to wait for a day before you can get watered.

If the leakage area is large and the impact is widespread, then you need to start from the bottom.

Everyone knows that the bathroom must be inseparable from a floor drain, you must know that the floor drain plays a role in drainage, and can also prevent blockage, odor prevention, etc., but the floor drain will lead to water leakage after a long time. The following will introduce to you what are the waterproof leakage repair methods for floor drains between sanitary blue belts.

1. First of all, the structural layer around the floor drain should be removed, and the width should be about 150 mm to facilitate lapping, and the original waterproof layer should be retained;

2. Clean up the base layer, embed waterproof sealant in the floor drain pipe and floor groove, and make new waterproofing on the repaired base layer;

3. After the waterproof layer is solidified, the closed water test is done on the local place;

4. After the joint layer and surface layer are restored, reinstall the floor drain.

What should be paid attention to in the installation of floor drains.

1. Before installation, the drainage pipe should be protected first, and the pipe can be wrapped with a rag, which is also to prevent debris from falling into the pipeline and ensure that it is convenient to use in the future.

2. It is also necessary to ensure that the position of the floor drain is not lower than the surrounding of the floor tiles, if the position of the floor drain is higher than the floor tiles, or it is the same flat, then it is necessary to carry out a slope treatment to prevent water accumulation in the future use process. Bureau call.

3. It should also be taken into account that its later maintenance and replacement should be taken into account, so when you fill the ground with cement mortar, you can also use a roll to match the pipe, and then connect it with the sewer pipe, which will not affect the replacement of the floor drain.

4. Be sure to make sure that the floor drain is lower than the ground, and then pour the prepared cement into the void inside, and then slowly adjust its height. After pouring the cement, you can't rush to put the floor drain on it, and you have to wait for the cement slurry to solidify, which is also to ensure that they are tightly bonded.

Summary: What are the relevant contents of the waterproof leakage repair method for the bathroom floor drain are introduced here, and the leakage can be repaired in accordance with the above methods, and the method must be correct to prevent future use. If you want to know more about related knowledge, you can follow my regret reed reed Qijia network to consult.