After the router is installed, you can t access the Internet, and what happens if you can t connect

Connection: 1. The network cable on the wall (that is, the broadband network cable) is connected to the WAN interface of the router.

2. If you have a desktop computer to access the Internet, please buy another network cable from the other interface number of the router (interface, etc.) to connect to the desktop computer, in the network settings of the desktop computer, select Automatically obtain the IP address (if you can't do this step, please ask me again).

3. If you need to access the Internet on a laptop or mobile phone, you can directly search for wireless signals, find your router name, enter the password you set, and you can access the Internet. (In general, as with desktops, IP addresses should be automatically obtained.)

Router configuration: 1. Open the browser, and enter it may also enter the router configuration interface. In general, the login and password are admin

2. There should be a configuration wizard on the left side, click on that and follow the steps step by step.

3. If there is no configuration wizard, then configure each item yourself, you must configure the "network parameters" and "wireless parameters", and there should be no problem if you configure it, if you need wireless Internet access, then please pay attention to whether your router has the wireless function turned on.

The steps that need to be paid attention to are: 1. Please select the correct connection method in "Network Parameters", if you have broadband, it is generally PPPoE dial-up, and there are other ADSL, dynamic IP, static IP, etc., if you choose the wrong one, it will lead to failure to connect. If you're not sure which way to go at home, call your broadband company and ask.

2. Please write the Internet (broadband) and password correctly in the "network parameters" (if you forget, please contact the broadband company to ask for the password), please note that this password is not set by yourself, but when you buy broadband, the broadband company gives you, if this is written wrong, it will lead to being able to connect to the router, but can not access the Internet normally (the common feature is that the IP address is all.

3. In the "wireless parameters" (it may also be called something else, I can't remember clearly), please enter a password to connect to the router, this is set by yourself, used to connect to the router, if you don't set this password, then anyone (provided that you can search for your network signal, such as your neighbors) can connect your router to surf the Internet, which is the so-called "rubbing the net", which will affect your network speed. If you forget this password, you can reset it in "Wireless Parameters".

I can't use the Internet to use QQ to give you a remote network.。。。

The wireless router may not be set up correctly.

One end of the network cable is connected to the router, and the other end is connected to the network port of the computer.

1. Open the browser, enter, enter the user name: admin, password: admin (the IP of the general router is, user name: admin, password: admin.)

Visible next to the router device or at the bottom, there is generally writing. ）

2. Click on the quick wizard and follow the prompts.

Interface Type: PPPoE

Enter your broadband account number and password.

3. Select the DHCP service menu and enable the DHCP service.

After the setting is completed, connect one end of the network cable to the LAN port of the modem, and the other end to the WAN port of the router.