-
Santana stakeless side parking tips.
Hang in first gear, hit left steering, and start slowly;
Adjust the vehicle to keep a distance of 20 30cm from the edge line of the garage (refer to the hood rib or rearview mirror), and stop at the appropriate position in front of the garage (when the front boundary line of the garage is aligned with the upper edge of the reversing mirror);
Hang the reverse gear, look at the right rearview mirror, reverse slowly, and look at the left rearview mirror when the front boundary line of the garage is aligned with the lower edge of the reversing mirror;
When the left rear corner of the car is aligned with the right end of the garage rear boundary line (or the left end of the garage rear boundary line is about to come out of the rearview mirror), the left is killed;
Parking when the body is positive (look at the ribs on the hood or look at the garage boundary line in the rearview mirror);
Hang in first gear, hit left steering, and start slowly;
When the driver's body completely crosses the left boundary line of the garage (or the right headlight crosses the left boundary line of the garage 10 20cm), the right two and a half circles;
The body is timing (look into the distance) and return to the right direction to continue to the next step.
You can also use this as a reference for what you explored in this morning's exercise, and master it according to the parking space, speed, clutch, direction, etc.
The speed of the car and the speed of the direction directly determine the position and time of these points.
-
Look at the lines and corners. Go to Douding.com to take a look at "Driving Test Cheats", the book has more details**. **The book is sold on the Internet - it's a book, not a PDF counterfeit contract. Make no mistake.
-
You can lower the rearview mirrors on both sides, look at the distance between the rear wheel and the side line from the side mirror to determine the position of the rear half of the body from the side (or sideline), look at the distance between the rear of the car and the rear side line from the side mirror on the other side, and then adjust the direction of the front of the car.
-
1. After getting on the test car, candidates should first make preparations, buckle the seat belt, adjust the seat, adjust the rearview mirror, etc., and then press the fingerprint.
2. Hang a gear, drive parallel to the library line and keep a distance of less than half a meter and more than 30cm. When the front edge line of the garage disappears into the right side mirror, quickly turn on the turn signals, press the friendly slip clutch, hang the reverse gear, and at the same time kill the steering wheel in the direction of the garage.
3. At this time, the vehicle slowly poured into the side garage. When the left rearview mirror appears in the right rear garage position, return to the two steering wheels, and return to the steering wheel when the left rear wheel presses the dotted line on the left, so that the car slowly retreats parallel to the garage.
4. It is much easier to drive out of the side garage than to enter, turn on the left direction light. Beat the left steering wheel carefully, move forward slowly, and when the left corner of the front of the car points to the edge line of the field, turn back to the steering wheel for a circle and a half. When the edge line reaches the front of the car, let Huai be in the middle and then hit the steering wheel to the right.
Once the vehicle is straightened, drive straight out of the test area. So far, the exam has been successfully passed!
-
Side parking mirrors are a tool for the driver to directly access external information such as the rear, side, and bottom of the car while sitting in the driver's seat. In order to facilitate the driver's operation, prevent the occurrence of driving safety accidents, and ensure personal safety, all countries have stipulated that rearview mirrors must be installed on the car, with imitation rental, and all rearview mirrors must be able to adjust the direction. There is a problem of horizon in the rear mirror, that is, the range that can be reflected by the mirror.
In the industry, there is a reference to the three elements of vision, that is, the distance between the driver's eyes and the rearview mirror; The size of the mirror and the radius of curvature of the mirror. There is a certain relationship between these three elements, when the distance and size of the rearview mirror are the same, the smaller the radius of curvature of the mirror, the larger the field of view reflected by the mirror. When the radius of curvature of the mirror is the same, the larger the size of the mirror, the larger the horizon reflected by the mirror.
At the same time, the rearview mirror also has a reflectivity indicator. The greater the reflectivity, the clearer the image reflected by the mirror. The magnitude of the reflectivity is related to the reflective coating material on the inner surface of the mirror.
Due to the increase in speed of ordinary cars, wind resistance and noise are important issues for designers to consider, so the exterior mirror outline should be aerodynamic, and smooth lines should be used to minimize wind resistance and wind noise. Most of the time you have to look at the rearview mirror when parking on the side, and it is more accurate to judge the position of the vehicle by the rearview mirror. If the rear wheels can be seen in the rearview mirror, it will be easier to reverse and the distance from the side of the road will be better grasped if the rear wheels can be seen in the rearview mirror.
Some cars have more functions, and the rearview mirror will automatically lower when reversing, and the rear wheels can be seen. One is to refer to the front and rear vehicles, the front and rear cars as a reference, when the vehicle is aligned with the front or rear car, it means that the car has been parked. The reversing process is also a reference to the front and rear cars, and I have talked about how far away from the front car to start the direction, from the rearview mirror to see the bad omen to the rear car when the direction and so on.
-
Hang 1st gear, control the speed with the clutch, and the left assembly line of the front cover of the car is aimed at the position that the left side of the manhole cover is slightly outward, and the manhole cover is passed;
When passing through the No. 2 manhole cover, observe the trademark in the lower left corner of the front window, when the trademark slowly moves outside the right edge of the No. 3 manhole cover (rather late than early), play 2 circles to the left, observe the left assembly line of the front cover close to the above-ground marker, return to the right 2 circles in the direction, back to the positive direction (you can also observe the position of the central extension line of the manhole cover in advance and control the direction of the car), and pass the No. 3 manhole cover;
When the raft terrier destroys the prostitute and rubs the glass, and passes through the No. 3 manhole cover, observe the third node of the wiper on the right under the front window (the third node from the head of the wiper to the left) slowly moves to the outside of the right edge of the No. 4 manhole cover (rather late than early), and make 2 turns to the right when the left assembly line of the front cover is close to the ground marker, return to the left for 2 circles, return to the positive direction, and pass through the No. 4 manhole cover;
When passing through the No. 4 manhole cover, observe the top of the left view rear mirror, when the No. 5 manhole cover completely moves to the top of the left view rear mirror (rather late than early), play 2 circles to the left, observe when the left assembly line of the front cover of the car is close to the ground marker, return to the right 2 circles of the direction, return to the positive direction, and pass the No. 5 manhole cover;
When passing through the No. 5 manhole cover, observe that when the third node of the wiper on the right under the front window slowly moves to the center of the No. 6 manhole cover (rather late than early), hit the direction of 2 circles to the right, and when the left assembly line of the front cover is close to the ground marker, return to the left 2 circles to the direction, return to the positive direction, and pass the No. 6 manhole cover;
After passing through the No. 6 manhole cover, make 1 circle to the left, enter the road, and return to the right direction.
There are two places to pay attention to in side parking:
First, the left and right rearview mirrors should be adjusted, and the left rearview mirror should be lowered as low as possible, so that the left rear wheel can be seen. The right side mirror allows you to see the body.
Second, the rearview mirror in the car should be adjusted, and it should be adjusted to the middle of the windshield behind the car when you look up.
-
The main tips are:
The first step, the car is 30 cm away from the right garage, and the rear of the car is parallel to the garage. Step on the clutch, step on the brakes, hang the reverse gear, go backwards, ask the trainees to look to the right and rear at the same time, and shoot the right direction when the left front bar of the library appears in the middle of the small triangle window on the right rear side of the car.
The second step is to turn around and look at the left rearview mirror, when the right rear lever of the garage appears about 5 cm from the left rear of the car, it is necessary to quickly return to the straight direction and let the car go diagonally and straight.
Step 3: Head out of the left window to look back at the left rear wheel, when the left rear wheel retreats into the warehouse (the left side line of the warehouse) direction of about 10 cm, quickly hit the left direction.
Fourth, look at the front of the car, the body is stepping on the clutch and brakes.
-
2013 Side Parking Tips.
<> below is a rendering of the tires and lines in the mirror. (third point).
The following is the method of outbound delivery, and there are also 2 points.
<> hope it helps! ~
-
The same question, unlucky, caught up without a pole and did not stop, it was terrible. I hate changing the rules very much, the coaches know that the news is not a few days away from the exam, and then re-learn, and also stipulate the number of exams, what is unreasonable to break the rules. Why are we guinea pigs?
-
Feel. Haha, just kidding, ask the same question.
Principle of square and side parking of semi-trailers.
1. The semi-trailer is side by side with the adjacent car. >>>More
A few days ago, I took the second test, a little experience, you can see if you can refer to: when I was learning in driving school, everyone's points are different, there may be a difference of 2-3 centimeters, which should be found under the guidance of the instructor and write down. >>>More
In fact, the overall summary of side parking is four words: "slow driving" and "fast fighting". Use the clutch to control the speed to each point. >>>More
If you think too much, you must only enter one library, and several libraries are because you are not the only one who takes the exam.
Introduce to the students how to use the "left and right looking method" to end this "old and difficult" problem. >>>More