Regarding the question on the Apple mobile phone, it keeps showing E, does it cost traffic?

It is inexpensive to show that E means that you are in the Edge network coverage, just like if you are in a 3G network, the position of E will change to 3G. As for whether it consumes traffic, it depends on whether there is a program network at this time, and you can't judge whether you are consuming traffic by virtue of e.

As long as there is a small E or 3G words on it, you are wasting money,Mobile phone Youku and mobile TV are just clients,All the content in it needs to be networked,WiFiOf course, but China's wifi is not like the United States everywhere,China's wifiOnly a certain store or public facility will have most of the civilian wifi are encrypted。

Yes, it should be Dopoda a lot of machines are like that, you have to click on that e to disconnect by yourself.

Apple's connection settings turn off GPRS permanent connections. Select the connection when you need it, and you're good to go.

Some machines are gpgs,Some are color e,It's to display the song E word。。。 And watching TV on a mobile phone hurts money...

The iphone8 mobile phone traffic shows that the e-network is caused by the abnormal network status at present.

Tools Required: iPhone8 Phone.

Steps to restore network status:

1. Unlock the iphone8 phone to the main page of the screen, the network in the upper left corner is displayed as [e-network], open [settings].

2. Enter the specific option list of [Settings] and select to turn on the [General] function.

3. Jump to the menu bar list of the [General] function, and click the [Restore] setting at the top.

4. In the specific selection list of [Restore] settings, click the [Reset Network Settings] function in the third row.

5. According to the system prompts, manually enter the [self-set 6-digit digital password] to authorize the restoration of network settings.

6. After resetting the network settings, press and hold the [Power Button] on the side of the iPhone8 body to restart the phone.

7. After resetting the network settings and restarting the iPhone8 phone, the network status in the upper left corner can be restored from [e-network] to [4G].

Apple 6splus traffic does not show 4g when it is turned on, does it mean that an e is a problem with the phone.

1. Because the 4G mobile phone can search for the 4G signal, if the mobile phone used is not a 4G mobile phone, the state of the display of the use of traffic is when the signal in the network environment is not good, there is no 4G signal, and when the E is displayed, it means that only the 2G signal is searched. 3. At present, the 4G signal in some areas has not been fully covered, and the 4G signal may not be searched when it is used, and the displayed usage traffic will also be E.

E stands for 2G signal.

It is possible that you may not be able to receive a 4G signal in your area.

If you rule out the base station signal and setting issues, just change the SIM card. Go to the business hall.

There are two main reasons why the traffic of the Apple mobile phone will show an e:

1 .The 4G switch is not turned on.

2 .If it is turned on and still like this, it means that the 4G signal is not covered in your location. Or the coverage is not good, and it is automatically connected to the 2G network.

The specific steps are as follows:

1 .The 4G switch is not turned on.

2 .If it is turned on and still like this, it means that the 4G signal is not covered in your location. Or the coverage is not good, and it is automatically connected to the 2G network.

Summary. Hello, you have turned on the traffic, but E stands for Edge network, which belongs to the network, and the network speed is faster than G.

When the mobile phone surfs the Internet, the notification bar will display the network currently used, and various icons represent different networks and network speeds, as follows:

1.G, which stands for GPRS, refers to the network (shown as a circle O on the iPhone), and the network speed is slower at this time.

2.E stands for the Edge network, which belongs to the network and has a faster network speed than G.

3.3G, refers to the ordinary 3G network, which is fast, with a downlink speed of up to 2MB.

4.H, refers to the upgraded version of the 3G HSDPA network, which is a network, commonly found on China Unicom's WCDMA mobile phones, and can reach .

5.H+, commonly found on China Unicom's WCDMA mobile phones, HSDPA's upgraded version of HSPA+, is, the speed can reach 21M-42M

6.4G is a TD-LTE network, with a theoretical uplink and downlink speed of up to 100MB.

Apple's mobile phone can't turn on the traffic, what's going on with the word e?

Hello, I received your question, please allow me to inquire about the relevant information to better reply to you, wait for two minutes.

Good. Hello, you have turned on the traffic, but E stands for Edge network, which belongs to the network, and the network speed is faster than G. When the mobile phone surfs the Internet, the notification bar will display the network currently used, and various icons represent different networks and network speeds, as follows:

1.G, which stands for GPRS, refers to the network (shown as a circle O on the iPhone), and the network speed is slower at this time. 2.

E stands for the Edge network, which belongs to the network and has a faster network speed than G. 3.3G refers to the ordinary 3G network, which has a fast speed and a downlink speed of up to 2MB.

4.H, refers to the upgraded version of the 3G HSDPA network, which is a network, commonly found on China Unicom's WCDMA mobile phones, and can reach . 5.

H+, commonly found in China Unicom's WCDMA mobile phones, HSDPA's upgraded version of HSPA+, is, the speed can reach 21M-42M64G is a TD-LTE network, with a theoretical leather or uplink and downlink speed of up to 100MB.

You can use the network normally when you connect to the wireless network, and you won't have the network when you go out.

Yes, it means that the network in your area is relatively poor, and there is no network on your phone.

So what to do.

This has nothing to do with your mobile phone, it is your local network is not good. The advice is to stay in a place with wifi.

I can't have Wi-Fi everywhere when I go out.

Now the network is developed, as long as it is not a remote area, it is basically a 4G network, then you go out and wait for a high chain network for a while, and the mobile phone will resume the network when there is a signal.

All right. Hmmm, I wish you a great day

E is the connection that represents the connection of the Edge standard, because the mobile phone card traffic is in this mode, and some of the traffic Internet mode is also G on behalf of GPRS, the E network is faster than the G network, and the 3G display is 3G, and the 4G display is LTE

Because you're using a 2G card, the Internet shows E, and if you change it to a 3G card, the place where E displays 3G.

The mobile phone network is divided into G e H where G is the 2G network, E is the network, and H is the 3G network, which will be switched automatically according to the signal strength.

iPhone 6S phone can't turn on the traffic data and the "E" word is a poor signal caused by network abnormality.

Tools Required: iPhone 6S.

Steps:

1. After opening the iPhone 6S to the main screen page, the information bar at the top shows that the network status is "e" network, open [Settings].

2. After entering the [Settings] center, find the [General] setting in the list of setting options.

3. At the bottom of the menu bar list of [General] settings, select the [Restore] function.

4. In the management settings mode of [Restore], select [Restore Network Settings] to turn on.

5. When restoring network settings, enter [6-digit password] according to the system requirements to verify your identity and authorize.

6. After successfully restoring the network settings, press and hold the [Power Button] of the iPhone6S to make the phone enter the state of shutdown and restart.

7. Restart the iPhone 6S phone after restoring the network settings, and unlock it to the main page of the screen, which can solve the problem that the iPhone 6S phone cannot open the data and the [E] network is displayed.

1. Confirm whether the network in your area is normal, if so, there is no problem.

2. Set the network parameters and try again.

Net. Follow the instructions below to get help troubleshooting cellular data issues on your iPhone. Test after each step to confirm that the issue has been resolved.

Turn off cellular data on your iPhone, then turn it on again: Tap Settings > Universal > Cellular.

Restart your iPhone.

Check for carrier settings updates.

Update your iPhone.

Remove the SIM card and insert it back in. Allow your iPhone to regain the network.

If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Phone > SIM PIN.

Reset network settings: Tap Settings > General > Reset > Reset Network Settings.

Restore your iPhone as a new device.

Note: If your carrier doesn't appear in this list, check with your carrier to confirm that you're using the correct cellular data settings.