Why does the stereo cylinder fan stop automatically?

It's not like you set a timer and his time will stop automatically.

Generally speaking, there is a switch for the fan, and you can click it directly, so that you can turn off the power or turn off the power, or you can press the timer function.

Why does the drum fan drop automatically? If it drops automatically, it may be that you have been in disrepair for a long time and he has let go, so if he is not so strong, it will fall automatically.

Why did your YTO Foshan automatically stop this should be a certain problem with a certain software, or some cases that caused overheating.

This setting, automatic shutdown, like this kind of fan, he can generally set the working time, to a certain period of time, it will automatically shut down, sometimes overheating protection, if it runs for a long time and heats, it will shut down.

This fan usually stops when it is short-circuited, so it is better to repair it and use it again.

For this fan, if there is a timer function, you can choose to schedule it, such as 30 minutes, so that it will automatically stop at a certain point.

First. Try a different fan. Second. If it doesn't work, reinstall the system third. If it doesn't work, try to change the motherboard First, there is a lot of dust in the new fan motor, which causes serious friction between the rolling bearing and the shaft.

The stereo cylinder fan automatically stops because it has a self-protection function. If the operating temperature is high, it will shut down.

1. Remove the outer protective net first.

2. Then unscrew the nut at the front end of the motor shaft, note that this nut is a reverse nut, and then you can remove it.

How to disassemble and wash Midea fans?

1. First of all, cut off the power supply, some need to take down the small screw on the side of the fan blade, and the round plastic cover in the middle of the front of the fan blade will be unscrewed off and you will see a small section of the shaft exposed.

2. There is a card around the protective net, pay attention to safety before wiping it with a wet cloth, and loosen the card.

3. Don't move the core parts, hold the leaf and gently tap the shaft fan blade with a small hammer to remove it, and unscrew the screw. When removing the fan blades, you need a screwdriver to remove the protective net of the electric fan. Different models of electric fans have slightly different designs.

How do you remove the fan blades of Midea floor fans?

1. There is a round plastic cover in the middle of the front of the fan blade, and when you unscrew it, you will see a small shaft exposed.

2. Hold the leaf and gently tap the shaft fan blade with a small hammer to remove it.

3. It should be noted that the knob is reversed clockwise for dismantling, and counterclockwise for tight.

4. If the fan is not of this structure, it means that there is a small top wire on the side of the fan blade, pay attention to it, and after the top wire is loosened, the fan blade can be removed.

It depends on what style of fan, the current fan is basically stuck on, if you can't find the screw, it is stuck on, pull it and push it out, and you can remove it with a little force.

First of all, find a hammer that takes advantage of the hand, pulls the wind, is neither long nor short, and has style. Then, it was opened.

With a hammer