-
AF1 started as a basketball shoe and was launched in '82.
Later, he was gradually eliminated from the court, but there are still players in the NBA who wear AF1 (Rasheed Wallace).
So, under normal circumstances, the AF1 is still very strong, although the workmanship of the 690 gear is rough, but shoes like LZ are definitely problematic.
As for whether it's a fake shoe or not, it's hard to say. Specialty stores generally do not blatantly sell fake shoes. Maybe the shoes were not qualified when they were made, and they were supposed to be disposed of (many of the shoes that were disposed of will also be sold, called factory shoes, but ** is generally very low).
I think the shoe was supposed to be disposed of, but maybe it was accidentally mistaken.
-
Then you must have bought a fake, I am skateboarding, buying shoes is skateboarding shoes, that is, the so-called board shoes, three or four hundred, jumping and grinding all day long, playing skateboarding old shoes, you can wear it for a long time, if I don't play board, the shoes are estimated to be able to wear for many years, really, skateboarding shoes are very suitable for sports, the bottom is not very hard, you can exercise or wear it as a casual one, and beautiful, I often buy vans, adio and so on,
-
What you buy is a fake, and the real thing can't be so unsturdy.
-
It can't be a fake.
It's not that you're wearing it too much.
Still bumped into it.
The sneakers are very sturdy and easy to match.
-
"Sneakers" are flat-type shoes. It comes from the shoes worn by skateboarders, so it is also called skateboarding shoes. Compared with general shoes, the difference between board shoes is:
It's almost always flat, so you can rest your foot completely flat on the board. Moreover, there is a shock-proof function. There is also a reinforcement on its sides.
Famous shoemakers arose mainly in Europe, because in the United States with the rapid development of modern shoemaker mass production, individual shoemakers became redundant. The Nike skate shoe industry in the United States sprouted in colonial New England, where farmers made their own shoes in the kitchen in the winter. The whole family is involved in this work.
Men cut the leather and stick to the soles of their shoes, and women sew the edges of their shoes. The workbenches used by colonial shoemakers are now collectors' items. As a result of mastering the art of shoemaking, some daring farmers set up small shoe workshops, where three or four workers worked together to assemble and bottom the shoes sewn by local shoemakers, and then make finished shoes.
In 1908, a Nike shoe factory was built in Lean, Massachusetts, which further developed local shoemaking technology. There the workers are no longer making Nike shoes independently, and every step of the shoe making is handled by a trained person. The production line began to take shape.
At first, Nike sneakers were still made to order, but in order to keep the workers busy during the off-season, the shoe shop owner started making shoes that were not pre-ordered. These shoes are called for sale and are displayed in the windows of local stores. In the early days, the Harvey brothers used horse-drawn carts to load shoes for sale and sell them in nearby places.
In 1793, they opened their first shoe retail store in Boston, with ready-to-wear shoes on Wednesdays and Saturdays. Since the middle of the eighteenth century, inventors have been working on the improvement of sewing machines. It wasn't until 1790 that the first sewing machine dedicated to leather processing was repurposed by an Englishman named Thomas Saint.
It's almost just an awl that perforates the leather vertically upwards. Mark of the United Kingdom. Sir Brownler, a former chief engineer in New York Harbor, invented a press that used a metal needle to sew the upper and sole of a shoe.
In order to do his duty in the British war against Napoleon, with the help of disabled soldiers, Brownler produced 400 pairs of shoes a day. After the end of the war, the British shoemaking industry reverted to manual operations.
-
As the name suggests, a cricket shoe is a flat sole like a board. Send lz a ** and you will understand!
-
The skateboard shoes are flat, without a heel.
-
It's just that the sole is flat.
-
"Sneakers" are flat-type shoes. Because it is a shoe that is often worn by skateboarders, it is also called skateboarding shoes. Compared with general shoes, the difference between board shoes is:
It has a flat sole so that the foot can be completely flat on the skateboard, and the shoe is shock-resistant. It has reinforcements on the sides, and some brands of shoes have anti-wear laces.
1. Features. Skateboarding shoes are made for skateboarding and are wear-resistant. There are many features of skateboarding shoes, especially in recent years, a lot of high-tech technology has been added, and in general, it is designed to make skaters more comfortable when playing skateboarding.
The main feature is that the sole should have a cushioning function, not necessarily an air cushion, the shoelace is designed to protect against abrasion, the toe cap is the easiest to wear, it needs a very wear-resistant material, the tongue is thick, the ankle is protected, and there are many more particularities, on the insole, heel, shoe inside, all kinds of features, all for better sports effect, and more comfortable skateboarding feeling.
2. Maintenance. Most of the board shoes are canvas shoes, which can easily get dirty. When the shoes are dirty, you can use clean water dipped in detergent to gently scrub, then rinse with water, and place them in a ventilated and cool place to dry them to avoid direct sunlight and exposure.
Do not use heating or open flame for drying, so as not to cause aging, glue opening, fading and serious deformation. Improper care methods such as excessive direct sunlight and hot air from hair dryers can reduce the service life of shoes. It cannot be soaked for a long time when washing, and the general soaking time should not exceed 20 minutes. If it is stored for a long time, the shoes should be brushed and cleaned first, and then stored in a cool and ventilated place after drying, so that the shoes have enough time to dry to avoid mildew.
It is best to prop up the inside of the shoe with a paper ball or shoe support to avoid serious deformation. Dry with the toe toe facing down and the sole facing the wall in a ventilated place at room temperature to prevent water from soaking into the midsole foam material.
-
Pros Affordable, comfortable, casual, beautiful Cons Exercise is not easy to run, and the speed of running is slow.
-
The advantage is that it looks better to wear, but it is not conducive to sports.
-
Clatter shoes are divided into soles, and different soles have different advantages and disadvantages.
-
Semi-casual and semi-sporty, you can wear it at ordinary times, and you can also wear it when you exercise, but it hurts the shoes quite a lot and the protection of the feet is not particularly inverted
-
Skateboard shoes belong to sports and leisure shoes, and do not belong to sports shoes, board shoes are specially designed for people who play skateboarding, wearing board shoes will be very uncomfortable, and the feet will be swollen and painful, so board shoes belong to sports rest and leisure shoes, and it is not suitable to wear board shoes when exercising.
The style of board shoes is more special, and the soles are harder, which is more suitable for wearing in daily life, and the board shoes are quite good to match clothes, which is why Zhongxin jujube oak people like board shoes, which is a very worthy item.
The sole and upper of the shoes are made of polyurethane, and the upper is also a relatively heavy suede leather, which is very wear-resistant, and the shoes have a certain cushioning capacity, and the shoelaces are designed to protect the shoe, all in order to have a more comfortable skateboarding feeling, which is produced for skateboarding.
However, the breathability of board shoes is not very strong, and it is easy for the feet to sweat after wearing it for too long, on the contrary, the breathability of sneakers is very strong, no matter how long you wear it, there will be no sweating, after all, it has an exhaust hole, which can naturally drain away sweat.
There is still a big difference between sneakers and sneakers, we need to choose shoes that suit us, if we want to exercise, we must wear sneakers, if you want to live in ordinary life, you can choose sneakers, after all, the style of sneakers is better than sneakers.
I feel that it is cloth shoes, and the old Beijingers know it.
The solution to the yellowing of the edge of the sneakers: >>>More
Lying down and straightening your legs and raising your legs are effective, and I haven't tried squatting yet. You are almost as injured as me, and I also tied a 5-pound sandbag to my calf, and exercised my muscles dozens of times a day to prevent atrophy. I started to resume exercise yesterday, and I didn't move much for a month before, and I took some blood-activating medicine and hot compresses. >>>More
Shoe size, also commonly referred to as shoe size, is a standard unit system used to measure the shape of a human foot in order to fit a shoe. At present, the shoe size used in countries around the world is not consistent, but it generally includes two measurements: length and width. The length refers to the length of the wearer's foot and can also be the length of the manufacturer's last. >>>More
Nothing is fixed, but hiking boots are best for mountain climbing. >>>More