What is ecological floor heating and what is the difference between ecological floor heating and ord

Through a number of tests, the use of the third generation of ecological floor heating heating, the operating cost of 15 per square meter of the use of capillary network to create the third generation of ecological floor heating, because of its heat dissipation of up to 135W per square meter to make the use of "cold water heating" become a reality, 35 degrees of low inlet water temperature to improve the COP value of the heat pump unit, creating a new era of full use of low-grade energy, in line with the national policy of "energy saving, emission reduction and consumption reduction, improve building quality" advocated by the state. The unique parallel structure greatly reduces the resistance of the pipeline, so that the temperature attenuation is minimized (the indoor surface temperature difference is controlled within 1 degree), which completely solves the problem of excessive temperature difference between the beginning and end of the traditional ground coil pipe due to large water conservancy loss, and the indoor temperature is more uniform and the comfort is greatly improved.

The lightweight, thin and flexible PP-R material overcomes the problem of traditional floor heating that requires reducing the height of the room (saving at least 70mm of space height). The lightness of the installation and the extremely high heat dissipation efficiency make the temperature control failure caused by excessive heat storage in the floor be better solved, and with intelligent control and fool-style panel operating system, real-time temperature control can be realized in the real sense (the temperature control delay time is reduced from 4 6 hours to 5 30 minutes on the traditional floor). Combined with the convenience of the installation of the decorative surface layer and the unique parallel structure, the user no longer has to have a headache due to the "flooding Jinshan" accident caused by water leakage (once there is a water leak, it can be found from the decorative layer, at this time, the leaking capillary tube can be burned and pinched to death with a lighter, which will not affect the normal operation of the system).

The initial investment of about 100 yuan per square meter (building) is basically the same as the traditional floor heating (floor heating bean stone concrete protective layer), which is the premise that the capillary network can really be used by the people and fully popularized.

20 yuan for 150 days. If combined with a water source heat pump, the operating cost will be reduced to 5-10 yuan per square meter for 150 days;

The third generation of ecological floor heating --- capillary network ultra-thin floor heating will surely sweep the heating market with the trend of sparks!

That is, some domestic carbon fiber and carbon crystal manufacturers play some propaganda slogans, in the final analysis, it is not electricity.

The idea is good.

But when making a product, you really only think about making money.

Not explained.

In fact, the difference between traditional floor heating is not very big, although it is ecological, but it still consumes electricity, etc., in fact, it is more energy-saving, but compared with the early investment, there is basically no possibility of popularization.

Floor heating has not yet been popularized, and how to popularize ecological floor heating ......

It should be a carbon crystal floor heating product.

<> floor heating is the abbreviation of radiant floor heating, which is to use the whole ground as a radiator, through the heat medium in the floor radiation layer, evenly heat the entire ground, and heat the room through the ground in the heat transfer mode of radiation and convection, so as to achieve the purpose of comfortable heating.

According to different heat transfer media, it is divided into two categories: water floor heating and electric floor heating, and according to different pavement structures, it is mainly divided into dry floor heating and wet floor heating.

Water floor heating refers to a heating method that heats water to a certain temperature and transports it to the water pipe cooling network under the floor, and realizes the purpose of nuclear heating through floor heating. The low-temperature ground heat medium forms a gradually decreasing temperature distribution from the soles of the feet to the head indoors, and the indoor temperature is uniform, the temperature difference is small, the air humidity is low, the air flow is small, and the human body feels comfortable.

Electric floor heating is to bury the heating cable on the outer surface with the upper limit of the allowable working temperature reaching 65 in the floor of the re-accommodating hole, and the heating cable is used as the heat source to heat the floor, and the hot air is covered on the surface of the object as a good insulating body, so that the temperature of the whole ground is evenly distributed.

The full name of floor heating is called ground radiant heating, which refers to the installation of a layer of heating materials under the wooden floor or under the tiles, and then providing heat to the room through the heating materials, so as to help the room achieve a good warmth effect.

Floor heating is a heating method, which refers to laying a layer of materials that can generate heat under the ground decorative layer (such as tiles and floors), and then heating the room through the heat transfer method of radiation-based heating materials. Floor heating is different from air conditioning in the form of air convection, it can make the indoor temperature uniform, the soles of the feet warm, the head cool and quiet, the air fresh, comfortable and energy-saving.

Floor heating is roughly divided into two categories: electric floor heating and water floor heating. Electric floor heating refers to the heating material that is directly converted into heat energy by electric energy, in two forms, such as heating cables, electric heating films, heating floors, etc. Water floor heating refers to laying a layer of water pipes (i.e., floor heating pipes) on the ground, heating the water through the heat source host (such as gas wall-hung boiler, air source heat pump, etc.), and then continuously circulating in the floor heating pipe to heat the entire ground.

There are many classifications of water pipe materials, thickness of Fengyun jujubes, oxygen resistance, etc.

Floor heating is a heating method that uses energy sources such as water or electricity to transfer heat under the indoor floor, and Lu Meng radiates heat upwards through the ground.

Since hail warmth is emitting heat from under the floor, the source is in an uproar, so the temperature distribution is relatively uniform, and there is no local overheating or overcooling.

The full name of floor heating is ground radiant heating, which refers to the installation of a layer of heating materials under the wooden floor or under the tiles, and then provides heat to the room through the heating materials, so as to help the room achieve a good heating effect, which has the advantages of comfort, energy saving, and environmental protection. <

The full name of floor heating is ground radiant heating, which refers to the installation of a layer of heating materials under the wooden floor or under the tiles, and then provides heat to the room through the heating materials, so as to help the room achieve a good heating effect, which has the advantages of comfort, energy saving, and environmental protection.

Floor heating is mainly divided into electric floor heating and water floor heating.

1. When electric floor heating is carried out, it is mainly divided into three layers, including thermal insulation layer, thermal conduction layer and floor heating coil, the top layer is the thermal conduction layer, the bottom layer is the thermal insulation layer, and the floor heating coil will be set in the middle to play a heating effect in this way.

2. When the water floor heating is carried out, the low-temperature hot water circulates in the heating pipe to heat the floor, so as to have the effect of heating the floor. The general temperature of hot water is not higher than 60 degrees, this heating method is relatively traditional, and it will be cheaper than other types of heating methods, but in the process of construction, the amount of construction is relatively large, and it is more troublesome than other methods.

Advantages of underfloor heating

1. Floor heating can play a good heating effect, and the heating is very uniform, directly from the bottom to the heat, the heating speed is also very fast, can better improve blood circulation, and people stay indoors is also very comfortable.

2. At the same time, the service life of the floor heating pipe is also very long, and it is not easy to corrode after a long time, and it is more convenient to replace the floor heating pipe.

3. After the installation of floor heating, it can better reduce the noise between floors and floors, play a good sound insulation effect, and also increase the insulation layer, which can extend the service life of heating.

First of all, they are all floor heating, which is spread underground, which is a hidden project and does not occupy the use space of the room.

Ordinary floor heating refers more to water floor heating, through heating water, to achieve the purpose of heating the room, so it needs to be coiled underground, the coil method determines whether the heat dissipation of the room is uniform, it is worth noting, in addition to the water pipe and mushroom board are very important, be sure to choose the best one. Otherwise, the leakage of the water pipe is not easy to deal with, see the faucet running water.

Ordinary floor heating often needs to be equipped with water collectors, gas boilers and so on. This takes up a bit of space, and when installing the furnace, it will be unreliable and will punch holes through the wall, so you should pay attention to it and communicate well in advance.

Then there is the later maintenance, as long as there is no water leakage, clean the water pipe normally for one or two years, otherwise there are more microorganisms in it, and it is easy to go up the temperature, and the rest may need to be replaced with a boiler in three or five years. Every year, the heating season is opened three or two days in advance, just wait for use.

Ecological floor heating, like ordinary floor heating, is also spread underneath, but there is no need for water pipes, it is directly carbon nanotube heating film, which is quite thin, so it is very economical to save the overall floor height, about 2 cm or so, and it is the first choice for small space at home. Then it is the use of electric energy, with the use of on, that is, that is, hot, this is also very convenient, no one at home, work during the day can be lowered or closed, quite suitable for northern users, once the water floor heating is turned on, it is not good to turn off again, the water pipe is frozen and bursting is indeed not easy to deal with. It can only be a waste of more energy.

As for maintenance and cleaning, it is completely unnecessary, just plug it in. Because it is a membrane, there is no need for a coil, so the construction is also very fast, in short, it is convenient.

Traditional water floor heating is to place the water pipe coil on the ground insulation layer, and then pour it with cement, which not only has many potential safety hazards, but also occupies a lot of space height. The heat is very slow when used, the general apartment needs about 6 hours of heating time, and the villa needs about a day of heating time, and the gas boiler can not be turned off in the heating season from three to four months after the first opening, resulting in a very expensive use cost. Water floor heating will occupy 8 cm of floor height, and users will have to pay 1,500 yuan per year for maintenance.

The traditional electric floor heating is to make a coil of heating cables on the ground of the room, use electric welding construction connection on site, and then pour the cement layer, the construction process is extremely complex, it is easy to cause virtual welding, desoldering, and even electric sparks, causing serious consequences. Since the heating is made in the form of a conventional resistor, the cost of use is also quite high.

Ordinary floor heating takes 6 hours to heat up, while ecological floor heating heats up the space in 20 minutes. The usage fee is one-third of that of air conditioning and 20%-30% of traditional plumbing. The electrically heated conversion rate is 99%, and there is almost no loss of energy.

The height of the ecological floor heating layer only occupies 2 cm (including the insulation layer), which saves more than 5 cm of height space compared with traditional floor heating. No boilers, no water pipes, no on-site welding. Water pipes and wires can no longer be seen underground, so it is safe to use.

Three hours to complete, making it so easy and convenient to upgrade your home! The design life is 50 years, and the 5-year warranty is the longest service life.

The encyclopedia has:

23 The heating material of the ecological floor heating system is made by a special process. The heating principle is that under the excitation of electricity, the "Brownian motion" is generated in the heat-generating material through molecular clusters, and the collision and friction between molecular clusters generate heat energy. The system heats up after 3 seconds of power-on, and reaches thermal equilibrium in about 3 minutes.

23 Ecological floor heating mainly conducts heat from the bottom up through the far infrared, directly heats indoor objects and the human body, and the air is heated by the heat released by the human body and objects, so it will not cause indoor heat, peculiar smell, indoor dust and polluted air convection. According to the measurement of the National Infrared Product Quality Inspection Center, the electric heat conversion rate of 23 ecological floor heating is as high as 95%, and the wavelength is concentrated in the 2 15 m band, which is completely covered by the far-infrared wavelength of sunlight, which is called "the light of life" in medicine.