iPhone keeps showing pressing the home button to upgrade, the computer won t connect, and force rest

If the Apple phone can't be turned on normally, everyone will first think of holding the [home button and power button] at the same time for 10 seconds, this method is very good, and the general situation can be solved.

Because the home button is the fingerprint recognition of the Apple phone, after you press the home button on the home screen, the phone system will default to your approval of the firmware upgrade.

If there is a jam, slow response, and sometimes no response when the machine is in use, it is recommended that: 1Restart the machine.

If the battery is built-in, press and hold the power button and the down volume button at the same time for more than 7 seconds to restart the device. 2.Too many background programs on your phone may cause your machine to run slowly and lag, so it is recommended to close some programs running in the background.

3.Some machines support Smart Manager or Memory Manager, and it is recommended to manually close the application that runs automatically through this feature. 4.

If only a few applications are affected by the above, it is recommended that you update the application or uninstall and reinstall another version after deletion. 5.Check whether the memory of the mobile phone is insufficient, it is recommended to uninstall and delete some unused programs or files; 6.Check if your phone has system push notifications, and if so, update your phone to the latest system version.

7.If it doesn't work, back up the data in your phone (contacts, messages, **, etc.) and try to restore factory settings. If the problem persists, please bring the purchase invoice, repair card and machine to Samsung service.

I also have this phenomenon, just let it be unlocked like this - unlock - unlock, and finally a progress bar will appear, and then the upgrade is successful.

I thought about it later that it might be because there was a prompt before, roughly that in order to ensure the space required for the upgrade, the software needs to be uninstalled and reinstalled, probably because the phone is not running out of space. Unlock - Unlock - Unlock This action may be to reinstall the previously uninstalled software, and if the software is very large, it will take a long time.

When the Apple 6 system is updated, the boot screen displays"Press the home button to upgrade"Press the home button to let you enter the password,You can enter the password after vibrating the password,The interface of entering the password repeatedly appears,Can't turn on。 Expert guidance for fruit powder.

You can set up a fingerprint lock first, to see if the fingerprint can still be used, if the fingerprint can't be used, it is likely to be a bad source of the home key, and the solution is as follows:

1. First of all, open the settings in the Apple phone, as shown in the figure below.

2. Then in the page that opens, find and open the general, as shown in the figure below.

3. Then in the page that opens, find and click Software Update, as shown in the image below.

4. After turning on the software update, click on the automatic update, as shown in the figure below.

5. Finally, in the open page, the button behind the automatic update is completed, as shown in the figure below.

The iPhone shows pressing the Home button to upgrade.

If the home button of the iPhone fails, you can go to the after-sales service to replace it, or clean up the dirty things that are idle.

This must be replaced with a cable after sale

You can set up a fingerprint lock first to see if the fingerprint can still be used, and if the fingerprint can't be used, it is likely that the home button is broken.

If the fingerprint lock works, but the home button can't return to the screen, it may be the system or the home button, it is recommended to restore the system. If it doesn't work, go to after-sales service.

You can use the virtual home keyboard first. Settings - General - Accessibility - Assistive Touch - When the interface is opened, a virtual home button will appear.

Unplug the data cable connected to the monitor and the case, aren't there a lot of small needles on the data line, wipe those small needles with an electric pen or some metal object, it's best to wipe each one, and then it should be no problem to play. The reason is that the small needles are oxidized.

Press the home button + power button for more than ten seconds! There is also an iTunes recovery system, if the recovery is still not good, that is, the hardware is broken, the hardware is broken, and the after-sales service is not repaired, and the machine is directly replaced (except the back cover), and it is replaced free of charge during the warranty period.

1. Please press the "Power and Home Screen" button at the same time, keep it for more than 10 seconds, and force restart the phone.

2. If the white apple is still displayed on the screen, you need to press the "Home + Power" button on the main screen at the same time until the screen is released without a black screen.

If the expected device status cannot be reached after troubleshooting through the above situations, please contact us to avoid affecting your daily use.

We're here for you.

When you don't know the specific solution.

You can call Apple customer service.

First tell him what the situation of your mobile phone is, and then let him tell you the specific place in your city.

in order to fix your phone faster.

How to deal with the iPhone not booting normally:

1. Check whether the iPhone has physical damage, such as: bending deformation or water ingress and other accidents;

2. Use the original data cable and charger to charge the iPhone, check whether the iPhone is responsive, and the battery may not turn on if the battery is insufficient;

3. Force restart your iPhone;

4. If there is still no response or cannot be turned on normally after the above operations, it is recommended to go to the local Apple official or authorized after-sales service.

1. For non-original chargers, this is caused by the charger's substandard specifications, and it is enough to replace an original charger.

2. Check whether the data cable is normal. The data cable looks normal on the outside, but it may have broken inside, and the way to check is to borrow someone else's data cable to see if it can be charged.

3. After the battery is exhausted, the battery will enter the sleep state, and it needs to be charged for 20-30 minutes to activate the battery before it can continue charging.

Supplement; If the above methods are ineffective, it means that the battery or mobile phone is faulty, and it is recommended to repair it.

If it still doesn't work, go to an Apple repair shop and find a professional to repair it.

1. System firmware compatibility issues.

Due to the rewriting of some functions of the iOS system firmware, which affects the compatibility between the original system firmware and the mobile phone hardware, the possibility of automatic shutdown of the Apple mobile phone caused by the system firmware after jailbreaking exists.

2. Application software plug-in compatibility issues.

Since these plug-ins have not been rigorously tested by a third party after jailbreaking, it may cause compatibility issues with the system, causing the iPhone to shut down automatically.

3. Hardware problems: battery leakage.

If you use a non-original charger, the charging voltage and charging current are not strictly controlled, it will also damage the battery of the iPhone and cause shutdown.

4. Hardware problem: motherboard power supply IC

If there is a calculation error in the logic control unit, it is clear that the mobile phone battery is charged, and the lack of power supply IC in the motherboard power supply IC layer will think that the mobile phone battery is out of power, and the mobile phone will be automatically turned off.

5. It is recommended to bring the device to the regular after-sales center for repair and treatment as soon as possible, so as to avoid problems such as aging battery, damaged motherboard, and system crash of the mobile phone (AutoNavi searchApple Service Center

The solution to the iPhone won't turn on:

Apple mobile phone can not turn on first to make sure, is it because of the mobile phone battery is out of power, first charge the mobile phone for a while and press the power button to see (Beijing Apple customer service center 010 5363 0616) It may be because the mobile phone is not enough to turn on normally.

In this case, the Apple mobile phone can't turn on, and it may be that the phone is in a dead state, you can also try to press and hold the power button at the same time, the power on button + home button, and wait a few seconds for the phone to automatically restart.

If the above methods cannot solve the problem, then it may be caused by the hardware failure of the mobile phone, such as: the Apple mobile phone boot button is broken, the battery is aging, etc., it is recommended to bring your mobile phone to the regular Apple customer service center for inspection and maintenance.

Repair the mobile phone or go to the regular after-sales center for repair, so as to have a guarantee, in the case of not understanding, it is not recommended to disassemble the machine and repair it blindly, so as not to cause damage to the mobile phone. If it is convenient, you can go to the store for inspection and repair.

The phone keeps restarting and can't be turned on, forcing the shutdown is useless, you can solve the required tool raw materials by flashing the machine:

An Apple mobile phone, a data cable, and a computer.

Here's how to flash the machine:

3. Flashing this will lead to the loss of data in the phone, there are important data in the mobile phone to back up the data in advance, in Apple's summary management interface, you can back up the data immediately, when the flashing is completed, and then reconnect to the iTunes software, restore it.

4. Turn off the phone at this time, and then restore the system for the Apple phone.

1 Press and hold the power button first, the Apple logo will appear at this time, do not release the power button.

2 Then press and hold the home button on the home screen again until the phone screen goes black.

3 When the phone screen is black, release the power button and hold the home button on the home screen until an apple is detected on the computer.

5. Then in the iTunes window, click on the button to restore Apple.

6. Next, it will prompt whether to restore and update, if the recovery will delete all data, click Restore and update.

1. Press and hold the home button while holding the power button, continue to press and hold for about 10 seconds, only until the white apple logo appears on iphone5, put the phone, and the machine will automatically restart.

2. After rebooting into the system, go to the "Settings" of iPhone5 and slide the screen below to view. You can go to Cydia to completely remove the plug-in that caused the failure.

You can turn on the virtual home button, and the solution is as follows:

1. First turn on your iPhone and tap Settings, as shown in the figure below.

2. Then find "General" in the settings, as shown in the image below.

3. Scroll down in General, and you will see the option of "Accessibility", as shown in the figure below.

4. In the Accessibility Function, find the Assistive Touch and find that it is turned off, so there are no virtual virtual buttons on the screen, as shown in the figure below.

5. Turn on the virtual touch, as shown in the figure below, and the problem is solved.

Install iTunes on the computer first,Turn off the phone,Press the power button for 3 seconds,Then press and hold the volume down at the same time,Release the power button for 10 seconds,Keep the volume down,About 5 seconds,The phone is in recovery mode,iTunes recovery,The first boot can't be without the home button,Shut down and restart it,Toss Lao Tzu overnight。。。

**There are some for sale, but you have to disassemble the phone, or put the mobile phone in the refrigerator, so that it will turn off naturally.

6's home button on a treasure more than a dozen pieces.

The home button can be broken, and it's the first time I've heard of it.