Which is the motherboard in Device Manager?

In the Device Manager, you can only see the type of chip on the motherboard.

If it depends on the manufacturer's model, you can use "Everest Ultimate Edition".

Planting address.

a. Open the case to see the motherboard printing or label. Some are printed on the verso.

b. Use relevant software to detect, but it is generally a detection chip.

The motherboard is made up of a lot of hardware, the device manager.

It's about looking at all of this hardware.

The motherboard is just a carrier of hardware.

Press and hold pause break when you turn on to take a look, why go to Device Manager.

If you are not familiar with the model of the chipset, such as 82945 is 945, then, you can use a software called everest, don't say too lazy to go **, this software is very authoritative.

Here's how to do it:Steps.

First, right-click on My Computer and select Properties. As shown in the figure below:

Steps. Second, then select Device Manager after entering the interface. As shown in the figure below:

Steps. 3. Then click on System Devices. As shown in the figure below:

Steps. Fourth, finally in this column, you can see the model of the motherboard. As shown in the figure below:

Start Menu - Run - Input.

dxdiag

appears in the screen"system"Then it's time for your motherboard model.

The opening will flash a little, and you press break to find it slowly.

You can also see it inside the BIOS, and press delete when you boot it.

I can't necessarily see it with DXDIAG on Windows, but I can't see it on my assembly machine.

Recommended or use software,Most of them are related to system optimization,Testing software has,Windows optimization master even gives system upgrade suggestions。

Here's how to check the motherboard model:Tools Raw materials: Lenovo Thinkpad, Win7, Control Panel.

1. Click Start in the lower left corner and select Control Panel.

2. Open the "Control Panel", select the category as the viewing method, and then click "Hardware & Sound".

3. Finally, click "Device Manager", and after opening it, you can see the motherboard model and other related information.

It is not possible to call the motherboard driver from the system device.

This is reflected in the network adapter.

The most common ones are realtek series version and VIA series are part of the driver, and the setting method.

1 Desktop mode, right-click on the computer - Properties.

2 On the Properties interface, click Device Manager.

This is shown in the figure below.

3 Find the network adapter in the Device Manager list.

4 Network card, find the wireless network card.

5 Right-click on the wireless card and select Enable Device. Note: Sometimes the network connection is not available, you can disable the device version before clicking to enable the device.

6 Once enabled, you will see the Wi-Fi stool icon in the bottom right corner.

You can use the computer to check the information such as the hardware detection of the state.

1. First, click on the toolbox to open the hardware detection tool.

2. Click on the overview of the electric group imitation brain, and you can view all the collapsed rubber fiber hardware information.